ADVrider

Go Back   ADVrider > Bikes > Thumpers
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
Old 09-17-2012, 08:33 PM   #69226
planemanx15
Beastly Adventurer
 
planemanx15's Avatar
 
Joined: Dec 2009
Location: Long Island, NY
Oddometer: 1,007
Quote:
Originally Posted by ER70S-2 View Post
Once upon a time, I found one of my plugs was quite loose.

If it's really coming from the rubber "gasket" type thingie, the ceramic insulator may have come loose from the steel shell.
http://www.gsparkplug.com/shop/spark-plug-construction/

How many miles on these plugs and who made them? (Champion, NGK?)
I think they are NGK. First thing I bought for the bike, day I bought it. 2 years and 9000 miles ago.

I guess I can pull the wire from that inner plug and start the bike and see if the plug is leaking itself.
__________________
2000 Suzuki DR650-790 - 790cc Big bore build thread
1985 Yamaha CA50 - The little scooter that Could
2009 Piaggio BV-250 - Escusi, Babba be bo-bee
planemanx15 is offline   Reply With Quote
Old 09-17-2012, 09:15 PM   #69227
procycle
Beastly Adventurer
 
procycle's Avatar
 
Joined: Jun 2007
Location: Center of the DR650 universe
Oddometer: 2,216
Quote:
Originally Posted by planemanx15 View Post
I guess I can pull the wire from that inner plug and start the bike and see if the plug is leaking itself.
I can't see any way that a quantity of oil is leaking from the spark plug. Unless your motor has severely worn rings there isn't any significant amount of oil anywhere near the spark plugs. I'm betting the leak is actually the joint between the head and cam cover right behind the spark plug caps or it's from the left front head bolt.
__________________
Clarke's second law of Egodynamics: "For every expert, there is an equal and opposite expert." - Jasper Fforde
www.procycle.us - Everything for your DR650 and lots of other great stuff!
DR900 Big Bore Stroker buildup
TurboDiesel Corvette - go to the end to start at the beginning
procycle is offline   Reply With Quote
Old 09-17-2012, 09:16 PM   #69228
neo1piv014
ADV in training
 
Joined: Aug 2011
Location: Albuquerque, NM
Oddometer: 619
Alright ladies and gentlemen... on tonight's episode of "Isaac the Wonder Mechanic," I got the gasket in place, got the side cover on, got the bolts tightened, and put a light coating of RTV sealant around the edge. With that all looking good, I decided to go ahead and put the fuel tank, seat, and side panels on so it would at least look like a motorcycle again while I waited for the sealant to cure for 24 hours. I ran into yet another difficulty, however. Is there some kind of trick to getting the damn fuel tank back on I've got the pucks all the way back in the little U shaped depressions, got the tank pressed up against that plastic shield thing, but the holes for the screws simply refuse to line up. I've tried pulling up on the tank to verify that the pucks are correctly in the spaces allotted for them, and I can't seem to find anything that it's hitting that would stop it.
Here it is, fully up against the plastic shield bit.


And here's the holes not lined up:



I've taken the black grommets out just so you could actually see where the screws are supposed to go here. I'm assuming there's just a knack that I'm lacking, but I've killed about 30 minutes out in the garage trying to put the dang tank back on. Thanks again, and I'm sure I owe someone about 30 beers by now
__________________
_________________________
Ride videos
'01 DR650
"The impossible often has a kind of integrity which the merely improbable lacks."
neo1piv014 is offline   Reply With Quote
Old 09-17-2012, 09:46 PM   #69229
refokus
Just Learning
 
refokus's Avatar
 
Joined: Jun 2007
Location: North Phoenix
Oddometer: 2,317
More time

I've spent an hour before installing a tank. Keep trying, you will get it.
__________________
"Single Trac is like Scotch, you have to aquire a taste for it!"
refokus is offline   Reply With Quote
Old 09-17-2012, 09:52 PM   #69230
planemanx15
Beastly Adventurer
 
planemanx15's Avatar
 
Joined: Dec 2009
Location: Long Island, NY
Oddometer: 1,007
Quote:
Originally Posted by procycle View Post
I can't see any way that a quantity of oil is leaking from the spark plug. Unless your motor has severely worn rings there isn't any significant amount of oil anywhere near the spark plugs. I'm betting the leak is actually the joint between the head and cam cover right behind the spark plug caps or it's from the left front head bolt.
As much as I don't want the rings worn, I do so I can justify getting your 790 kit!
__________________
2000 Suzuki DR650-790 - 790cc Big bore build thread
1985 Yamaha CA50 - The little scooter that Could
2009 Piaggio BV-250 - Escusi, Babba be bo-bee
planemanx15 is offline   Reply With Quote
Old 09-17-2012, 10:16 PM   #69231
neo1piv014
ADV in training
 
Joined: Aug 2011
Location: Albuquerque, NM
Oddometer: 619
Quote:
Originally Posted by refokus View Post
I've spent an hour before installing a tank. Keep trying, you will get it.
Sounds like my kind of plan. Do you slide it in straight and flat or do you slide it onto the pucks at an angle and then lower it onto the metal screw housings?

Sent from my LG-P999 using Tapatalk 2
__________________
_________________________
Ride videos
'01 DR650
"The impossible often has a kind of integrity which the merely improbable lacks."
neo1piv014 is offline   Reply With Quote
Old 09-17-2012, 10:23 PM   #69232
TrophyHunter
Beastly Adventurer
 
Joined: Aug 2009
Location: San Diego
Oddometer: 2,136
Dogjaw. My prediction is you'll LOVE the 19. I borrowed an ADV set of wheels and had a great time with the fat little 19. It inspired confidence and stupidity all at the same time. I'm not a canyon carving nut but the thing stuck so hard in the corners, I was able to push the envelope. Even going in a little hot, I was able to just keep leaning with the constant "keep the throttle steady" repeating in my brain.

I have a second wheelset with Shinko 705's on 'em so I'll evenutally add the 19 to my choices.
__________________
www.dualsportmoto.com
2005 DR650 2003 DRZ-250 '07 WR450
2013 HD Road King '73 Hodaka Wombat

"It's a small amount of gas, but it represents a long walk" My Dad...
TrophyHunter is offline   Reply With Quote
Old 09-17-2012, 10:38 PM   #69233
dogjaw
plays well alone
 
dogjaw's Avatar
 
Joined: Jul 2008
Location: between the Ozarks and the Ouachitas
Oddometer: 2,931
What tire where you running on your 19"? I was running the 700 on my 21, they stuck so well I figured I couldn't go wrong with the 705's... I'm going to go carve it up tomorrow; I do have concern about how far off my speedo will be, going to check it with my GPS.
__________________
By God, Woodrow; it's been one hell of a party.
dogjaw is online now   Reply With Quote
Old 09-17-2012, 10:49 PM   #69234
MeterPig
Meh
 
MeterPig's Avatar
 
Joined: Jul 2007
Location: Parker, Colorado...
Oddometer: 17,090
My 04f0 arrived today. I have to say, it's pretty sexy.
__________________
You looked down here...didn't you.
MeterPig is offline   Reply With Quote
Old 09-17-2012, 10:57 PM   #69235
ER70S-2
Beastly Adventurer
 
ER70S-2's Avatar
 
Joined: Sep 2009
Location: SE Denver-ish
Oddometer: 5,926
Quote:
Originally Posted by neo1piv014 View Post
Alright ladies and gentlemen... on tonight's episode of "Isaac the Wonder Mechanic," I got the gasket in place, got the side cover on, got the bolts tightened, and put a light coating of RTV sealant around the edge. With that all looking good, I decided to go ahead and put the fuel tank, seat, and side panels on so it would at least look like a motorcycle again while I waited for the sealant to cure for 24 hours. I ran into yet another difficulty, however. Is there some kind of trick to getting the damn fuel tank back on I've got the pucks all the way back in the little U shaped depressions, got the tank pressed up against that plastic shield thing, but the holes for the screws simply refuse to line up. I've tried pulling up on the tank to verify that the pucks are correctly in the spaces allotted for them, and I can't seem to find anything that it's hitting that would stop it.
And here's the holes not lined up:


I've taken the black grommets out just so you could actually see where the screws are supposed to go here. I'm assuming there's just a knack that I'm lacking, but I've killed about 30 minutes out in the garage trying to put the dang tank back on. Thanks again, and I'm sure I owe someone about 30 beers by now
Beer?? There's beer?!?!
Is that an IMS tank? I think you're supposed to remove that plastic shield? You are really close to the bolts lining up. Soap up the pucks like you're mounting a tire, everything should slip into place. As close as you are, I'd use a little persuasion. (Don't get stoopid and ruin your tank)

__________________
2004 DR650: 62,400 miles
2013 WR250R

SUZUKI DR650SE INFORMATION INDEX
Quote:
Originally Posted by Threewheelbonnie View Post
"BTW, I don't do style. It's a dirt bike, not some girlie dress-up thing." -

ER70S-2 screwed with this post 09-18-2012 at 08:13 PM Reason: Removed 2 pics
ER70S-2 is offline   Reply With Quote
Old 09-18-2012, 03:55 AM   #69236
greer
Beastly Adventurer
 
Joined: Jul 2005
Location: Glasgow, Kentucky
Oddometer: 3,712
Isaac,

How'd this work out? I'm with ER70S-2, the black plastic shield definitely needs to go.

Sarah
__________________
'08 DR650
greer is offline   Reply With Quote
Old 09-18-2012, 03:56 AM   #69237
Emmbeedee
Procrastinators
 
Emmbeedee's Avatar
 
Joined: Mar 2008
Location: Near Ottawa, ON, Canada
Oddometer: 9,378
Quote:
Originally Posted by greer View Post
Isaac,

How'd this work out? I'm with ER70S-2, the black plastic shield definitely needs to go.
Ditto on both our IMS tanks. Plastic shield is no longer on our bikes.
__________________
Want to know more about the Garmin Montana? See the Wisdom and FAQ Thread.
Want to know more about the Garmin VIRB? See here.
"The motorcycle, being poorly designed for both flight and marine operation, sustained significant external and internal damage," police noted.
Emmbeedee is offline   Reply With Quote
Old 09-18-2012, 04:31 AM   #69238
ADV8
Taumarunui..Darwin..
 
ADV8's Avatar
 
Joined: Nov 2007
Location: North of Sydney.
Oddometer: 2,230
Besides removing that black shield as already mentioned lining the holes up is the same as the Safari tank.
See that steel bracket with the lip under the rear of the tank.
If you use something like a ring spanner with the ring end in front of the the lip of the bracket,levering the tank forward will be easy to start the bolts.
Just remember those are only M6 threads in the frame,you want to make sure the bolts start easy to avoid cross threading etc.

Quote:
Originally Posted by neo1piv014 View Post

And here's the holes not lined up:


__________________
The person who got you the billet DR650 third gear set, you're welcome.
49 Sunbeam S7 Deluxe-57 TR6 Trophy-68 Huskys x 2-71 Commando Fastback-73 Ducati 750GT-73 Eldorado-74 TR5T x 2-74 Commando Roadster-73 and 74 H2A/B-77 and 81 900SD's-86 400WR-98 TL1000S x 2-08 DR780-07 Ducati HM 1100S
ADV8 is offline   Reply With Quote
Old 09-18-2012, 05:14 AM   #69239
kezzajohnson
kezza
 
kezzajohnson's Avatar
 
Joined: Apr 2007
Location: Cairns - Queensland Australia
Oddometer: 1,369
plastic shields

Quote:
Originally Posted by neo1piv014 View Post
Alright ladies and gentlemen... on tonight's episode of "Isaac the Wonder Mechanic," I got the gasket in place, got the side cover on, got the bolts tightened, and put a light coating of RTV sealant around the edge. With that all looking good, I decided to go ahead and put the fuel tank, seat, and side panels on so it would at least look like a motorcycle again while I waited for the sealant to cure for 24 hours. I ran into yet another difficulty, however. Is there some kind of trick to getting the damn fuel tank back on I've got the pucks all the way back in the little U shaped depressions, got the tank pressed up against that plastic shield thing, but the holes for the screws simply refuse to line up. I've tried pulling up on the tank to verify that the pucks are correctly in the spaces allotted for them, and I can't seem to find anything that it's hitting that would stop it.
Here it is, fully up against the plastic shield bit.


And here's the holes not lined up:



I've taken the black grommets out just so you could actually see where the screws are supposed to go here. I'm assuming there's just a knack that I'm lacking, but I've killed about 30 minutes out in the garage trying to put the dang tank back on. Thanks again, and I'm sure I owe someone about 30 beers by now
Yep, get rid of those plastic shields. They are only there for looks with the steel tank. I have never run the plastic shields with my IMS tank and have never had any issue with holes lining up. just a wiggle and a jiggle and bolt 'em up.
__________________
KezzaJohnson Blue 06 DR650se,Yellow 06 DRZ250

Website: http://www.territoryon2wheels.com

"May the Road Never Rise to Defeat you..."
kezzajohnson is offline   Reply With Quote
Old 09-18-2012, 05:30 AM   #69240
Mike_drz
Banned
 
Mike_drz's Avatar
 
Joined: Jul 2012
Location: somewhere near the beach
Oddometer: 402
this thread is funkyier than I thought it is


________
your wolrd point of view is suddenly wildened by a mindfully (of joke)
Mike_drz is offline   Reply With Quote
Reply

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 01:21 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014