Husqvarna TE-610 Owners Sign In Thread. - Page 1136

lionsroaar · 05-29-2010, 04:49 PM

Quote:

Originally Posted by K7MDL

I just use the regular blue permatex on teh cam bolts. Have not fallen out yet.

I pulled the linkage off completely and clean and grease all the bearing and bushings. The zerk is for greasing without diassembly in normal maintenance.

The swingarm nut take a 22mm or so soclet to get in there. I had to go out and get one.

Have the 47T and 15T Ironman sprockets on the last week with a new chain. I like the combo for general duty and freeway commuting. Tonight I swapped in an Ironman 14T. So will find out what 14/47 does for me on the freeway enroute to the trails - buzzy I am sure, but should be decent compromise for weekend duty I expect. Will change back to the 15T for weekday commuting. Had 14/45 before all of this new stuff whcih was not bad on the trails, but still too high, too much clutch work required, so this ought to be nicer experience on the trails this weekend. I like the circlip (snapring) CS for fast changes.

My Highway Dirt Bikes system should arrive Tuesday. Moving from stock 7/8" bars and Cycra handguards to Henry Reed bend fat bars and folding mirrors, handguards, and the 1 3/4" lower clamps. It will come with one of the first of Paul's new damper submount (for a Scotts damper) so will be testing that out next week and soon posting the good news on that. I want some rise over stock so hopefully I calculated it all correctly. If it is not high enough can still go to 2 1/8" lower clamps. The submount will lift it all up some.

I have about 3/8" clearance between the IMS tank and head tube. Still looking at pin mounting options. The Scotts '07 510 mount ring/post looks like it might fit. Mostosports has a new 2 piece one out for the small bikes, might fits the TE610 also? Worst case I get creative and make my own.

- Mike

Let us know what you figure out as far as the damper goes...I've got the full HDB setup on mine and it's SWEET!! I love the front and rear LED turn signals, much cleaner looking and nothing to break off. I also have Paul's upper clamp that has two Powerlet sockets in it...I might just have to get his exterior mounting brackets for the Powerlets if you can use a damper with his new one...Damn, more farkles...

lionsroaar · 05-29-2010, 05:13 PM

Here are a couple of pics of my baby on a recent ride in the Sierra's...

http://lionsroaar.smugmug.com/Motorc...83018869_mJD7g

Hmm, one more try...

M N B · 05-29-2010, 05:24 PM

Quote:

Originally Posted by lionsroaar

Here a couple of pics of my baby on a recent ride in the Sierra's...

fixed

lionsroaar · 05-29-2010, 05:30 PM

MNB,
Thanks, I've been trying to figure out what I did wrong...Checking settings on Smugmug, etc...Any suggestions?

lionsroaar · 05-29-2010, 06:39 PM

Hmm, one more try...

Sweet, got the pic thing now...

carternick79 · 05-29-2010, 07:16 PM

Quote:

Originally Posted by M N B

fixed

Which WM Tank bag is that?

K7MDL · 05-29-2010, 08:24 PM

Quote:

Originally Posted by carternick79

Which WM Tank bag is that?

Enduro model. It is just right for the Husky. In the case you are standing and leaning enough, it will bend to the side easy enough. Just the right size for my superzoom camera (in neoprene slip cover (Zing) and trail goodies, gloves.

- Mike

M N B · 05-29-2010, 08:33 PM

Quote:

Originally Posted by lionsroaar

MNB,
Thanks, I've been trying to figure out what I did wrong...Checking settings on Smugmug, etc...Any suggestions?

When you view the picture on smugmug, click share. I chose medium size.

Size doesn't matter (I know, I know), what's important is the URL needs to end in a viable image extension, like .jpg, .png or .gif

The one you used didn't. I pasted the URL into my browser and it loaded the page, then I clicked Share and went from there.

lionsroaar · 05-29-2010, 09:24 PM

Quote:

Originally Posted by K7MDL

Enduro model. It is just right for the Husky. In the case you are standing and leaning enough, it will bend to the side easy enough. Just the right size for my superzoom camera (in neoprene slip cover (Zing) and trail goodies, gloves.

- Mike

It's a great bag and is the perfect size for this bike. It swivels out of the way easily to fill the fuel tank and holds more than you think it would. It also has a clear map/phone pocket on top which is useful...

lionsroaar · 05-29-2010, 09:26 PM

Quote:

Originally Posted by M N B

When you view the picture on smugmug, click share. I chose medium size.

Size doesn't matter (I know, I know), what's important is the URL needs to end in a viable image extension, like .jpg, .png or .gif

The one you used didn't. I pasted the URL into my browser and it loaded the page, then I clicked Share and went from there.

Thanks! I found the thread posted by Baldy (search is my friend

) and found the same thing. I appreciate the help...

alanB1 · 05-30-2010, 05:28 AM

I broke off one of the little plastic fuel hose connection thingy's underneath the fuel pump

Whats the latest fix for this? I saw a few post in which one guy drilled and tapped the fuel pump base (I'm hoping there's a quicker fix).

The bike's still under warranty, but seeing as it broke due to my own stupidity I doubt that its covered!

Any help would be GREATLY appreciated.

xymotic · 05-30-2010, 07:41 AM

Quote:

Originally Posted by alanB1

I broke off one of the little plastic fuel hose connection thingy's underneath the fuel pump

Whats the latest fix for this? I saw a few post in which one guy drilled and tapped the fuel pump base (I'm hoping there's a quicker fix).

The bike's still under warranty, but seeing as it broke due to my own stupidity I doubt that its covered!

Any help would be GREATLY appreciated.

To my Knowledge that's the only fix. I had mine done by George @ Up-tite.

Course, you could be the trailblazer we've all been waiting for to try that external Honda ATV Pump!

alanB1 · 05-30-2010, 01:39 PM

Quote:

Originally Posted by xymotic

To my Knowledge that's the only fix. I had mine done by George @ Up-tite.

Course, you could be the trailblazer we've all been waiting for to try that external Honda ATV Pump!

Can somebody give me George's email address please?

xymotic · 05-30-2010, 02:11 PM

Quote:

Originally Posted by alanB1

Can somebody give me George's email address please?

http://uptitehusky.com/contact.htm#email
uptite@sbcglobal.net

(714) 540-2920

you'll have much better luck calling him ;)

alanB1 · 05-30-2010, 02:20 PM

Quote:

Originally Posted by xymotic

http://uptitehusky.com/contact.htm#email
uptite@sbcglobal.net

(714) 540-2920

you'll have much better luck calling him ;)

Thanks a lot Xymotic. I'll try getting hold of him tomorrow. Did you break yours as well? How much did it cost to get it fixed? How long did it take?

05-29-2010, 05:13 PM	#17027
lionsroaar I meant to do that!! Joined: Aug 2009 Location: Linden, Ca. Oddometer: 145	Here are a couple of pics of my baby on a recent ride in the Sierra's... http://lionsroaar.smugmug.com/Motorc...83018869_mJD7g Hmm, one more try... __________________ Sex is like pizza, even when it's bad it's still pretty good... 2009 Husky TE610 Up and over the Sierras to Bodie... lionsroaar screwed with this post 05-29-2010 at 06:40 PM

05-29-2010, 05:30 PM	#17029
lionsroaar I meant to do that!! Joined: Aug 2009 Location: Linden, Ca. Oddometer: 145	MNB, Thanks, I've been trying to figure out what I did wrong...Checking settings on Smugmug, etc...Any suggestions? __________________ Sex is like pizza, even when it's bad it's still pretty good... 2009 Husky TE610 Up and over the Sierras to Bodie...

05-29-2010, 06:39 PM	#17030
lionsroaar I meant to do that!! Joined: Aug 2009 Location: Linden, Ca. Oddometer: 145	Hmm, one more try... Sweet, got the pic thing now... __________________ Sex is like pizza, even when it's bad it's still pretty good... 2009 Husky TE610 Up and over the Sierras to Bodie...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-30-2010, 05:28 AM	#17036
alanB1 Adventurer Joined: Mar 2010 Location: Johannesburg, South Africa Oddometer: 21	I broke off one of the little plastic fuel hose connection thingy's underneath the fuel pump Whats the latest fix for this? I saw a few post in which one guy drilled and tapped the fuel pump base (I'm hoping there's a quicker fix). The bike's still under warranty, but seeing as it broke due to my own stupidity I doubt that its covered! Any help would be GREATLY appreciated.