Rock Hard Rally Gear. KTM LC4 and LC8 rally bash plates. (Australia) - Page 9

Apple Jam · 11-17-2011, 06:35 AM

Quote:

Originally Posted by burns

hey matt

interested in the 990 bash plates. can you pm me the price details with post to vic 3212.

cheers

burns

The quote below was from a couple years ago,

Is this still the current price? . And is that USD?

Quote:

Originally Posted by KTMatt

The standard one is $620 so may be a little more for the a special one just depends on how long it would take but it wouldent be to much more.

Cheers Matt

I want one

But I gotta wait just a bit and sell some more old crap.
I just depleted my PayPal on HIDs and Gerbings Gloves.
I'll be back !!

Have the tool boxes changed any for your new 990 Adv bashplates?
It looks like they'll fit around my Safari tanks juuuuust fine

Are they watertight? . I don't see a seal on this old pic. It'd still be OK if not, just wondering......

Quote:

Originally Posted by fenek70

KTMatt · 11-19-2011, 02:37 AM

Hi Guys,

The standard 990/950 Rally bash plate is $650 for Advriders.
Shipping to the states is,
With tracking and insurance $221.00
Without tracking and with insurance $185.00

The bash plate fits fine with the Safari tanks and the lids are pretty much water tight they have a foam seal stuck on the under side of the lid and if they start to leak its easy to replace.

The bash plate is the same as the one in the pics and are made out of 5083 Alloy and fully tig weldered.
I wont have any ready untill Januray some time as Ive got a heap of work on.

If you need to know any more details just ask.

And all prices are in Australian Dollars.

Cheers Matt

PS: Burns Ill PM you the details.

Apple Jam · 11-20-2011, 07:37 PM

Quote:

Originally Posted by KTMatt

And all prices are in Australian Dollars.

Cheers Matt

PS: Burns Ill PM you the details.

US and AUS dollars are almost exactly even money right now.

That is a very unique and exceptional Rally Plate.
I'll have to see what $ I can drag up by January......

CordR · 01-19-2012, 02:38 PM

Hi Matt,

Are these still available?

Interested in something for a 690E.

Thanks,

Cord

gatsch.hupfa · 01-29-2012, 04:14 AM

I am interested in Matts bashplates and have some questions:

1. Plate for 640 adv 2003:

I read in this thread that it weights 4,85 Kg in the version 5 mm mainplate and lids / 3mm boxes.
In another thread about the bashplates I think there was a version with 4mm / 3mm and around 4 Kg ?
Because I like low weight travelling motorcycles and I will not be speeding on motocross tracks jumping on big rocks I think the lighter version could be right for me. And no rallyes, just long distance travelling!
So what do you think about 4mm bashplates?

Anybody tried to put the battery in one of the boxes? (eg Yuasa YTZ10 150 x 87 x 93 mm plus some mm for the connectors)?

Size of the boxes (approx.)?

Do you know if the left box interferes with the tankguards made by Chris Barnes ( http://www.advrider.com/forums/showt...=111303&page=8 )?

2. Plate for 950 adv 2004:

How much does it weight?
Its also 5mm/3mm?
Size of the boxes (approx.)?
Is there a powdercoated version? (Picture in post #82 looks like powdercoated)

I tried to PM Matt and sent an email already some weeks ago, but there was no answer, maybe something went wrong?

LukasM · 01-29-2012, 07:10 AM

Hi Tom,

I can tell you two things:

- Fitment with Chris' tank guards is fine
- 4mm should be thick enough, it might be a bit more susceptible to dents but it should not punch through on a light(ish) bike like the 640.

Lukas

ajvanderlee · 03-27-2012, 09:42 PM

Matt, I would like a 640 adventure plate please!!

Afry · 06-05-2012, 11:56 AM

Are you still making these for the DR650? if so how much USD shipped to 92065 in the US?

KTMatt · 06-10-2012, 02:30 AM

PMs have been sent with all the details guys.

Cheers Matt

gatsch.hupfa · 06-12-2012, 12:37 AM

Matt,
I didn´t get PM or email

tom

KTMatt · 06-12-2012, 03:09 AM

Quote:

Originally Posted by gatsch.hupfa

Matt,
I didn´t get PM or email

tom

Hi Tom,

PM sent sorry for the delay
Ive got to check to see if I can get a battey in the 640 bash plate so Ill get back to you.

Cheers Matt

darenb68 · 10-17-2012, 02:34 PM

Matt, you still in business? sent you an email. Would love one of these things

KTMatt · 10-18-2012, 06:32 PM

Quote:

Originally Posted by darenb68

Matt, you still in business? sent you an email. Would love one of these things

Hi Daren

Check you emails I just sent you a reply

Cheers Matt

KTMatt · 12-04-2012, 01:11 AM

The finished product

Cheers Matt

darenb68 · 12-04-2012, 01:26 PM

Absolutely outstanding. Can you recap how it works? Does it come in both right and left versions? Are the loops on the bottom designed for attaching gear?

11-19-2011, 02:37 AM	#122
KTMatt ^OP Studly Adventurer Joined: Sep 2006 Location: Wollongong NSW Australia Oddometer: 727	Hi Guys, The standard 990/950 Rally bash plate is $650 for Advriders. Shipping to the states is, With tracking and insurance $221.00 Without tracking and with insurance $185.00 The bash plate fits fine with the Safari tanks and the lids are pretty much water tight they have a foam seal stuck on the under side of the lid and if they start to leak its easy to replace. The bash plate is the same as the one in the pics and are made out of 5083 Alloy and fully tig weldered. I wont have any ready untill Januray some time as Ive got a heap of work on. If you need to know any more details just ask. And all prices are in Australian Dollars. Cheers Matt PS: Burns Ill PM you the details. __________________ DSMRA Member # 1309 ROCK HARD RALLY GEAR Custom Aussie Made Bash Plates

01-29-2012, 07:10 AM	#126
LukasM Beastly Adventurer Joined: Nov 2006 Location: Vienna, Austria Oddometer: 4,915	Hi Tom, I can tell you two things: - Fitment with Chris' tank guards is fine - 4mm should be thick enough, it might be a bit more susceptible to dents but it should not punch through on a light(ish) bike like the 640. Lukas __________________ Proud member of the HUSABERG ADVENTURE TEAM! '12 Husaberg FE570, 09 KTM XC-F/ 450 RFS hybrid, 07 KTM 450 SMR, 08+09 BMW F650GS twins/F800GS conversion, 03+05 YZF-R6

03-27-2012, 09:42 PM	#127
ajvanderlee distance rider Joined: Oct 2010 Location: Austin, TX Oddometer: 8	640 adventure plate Matt, I would like a 640 adventure plate please!!

06-05-2012, 11:56 AM	#128
Afry Why hike? Joined: Aug 2011 Location: Ramona, Ca Oddometer: 328	Are you still making these for the DR650? if so how much USD shipped to 92065 in the US? __________________ KTM 950 SE Motorcyclist prayer: Oh lord if I die, please don't let my wife sell my bikes for what I told her they cost.

06-10-2012, 02:30 AM	#129
KTMatt ^OP Studly Adventurer Joined: Sep 2006 Location: Wollongong NSW Australia Oddometer: 727	PMs have been sent with all the details guys. Cheers Matt __________________ DSMRA Member # 1309 ROCK HARD RALLY GEAR Custom Aussie Made Bash Plates

01-19-2012, 02:38 PM	#124
CordR Gnarly Adventurer Joined: Mar 2010 Location: Vancouver, BC Oddometer: 425	Hi Matt, Are these still available? Interested in something for a 690E. Thanks, Cord

01-29-2012, 04:14 AM	#125
gatsch.hupfa Adventurer Joined: May 2010 Location: next to Vienna Oddometer: 13	I am interested in Matts bashplates and have some questions: 1. Plate for 640 adv 2003: I read in this thread that it weights 4,85 Kg in the version 5 mm mainplate and lids / 3mm boxes. In another thread about the bashplates I think there was a version with 4mm / 3mm and around 4 Kg ? Because I like low weight travelling motorcycles and I will not be speeding on motocross tracks jumping on big rocks I think the lighter version could be right for me. And no rallyes, just long distance travelling! So what do you think about 4mm bashplates? Anybody tried to put the battery in one of the boxes? (eg Yuasa YTZ10 150 x 87 x 93 mm plus some mm for the connectors)? Size of the boxes (approx.)? Do you know if the left box interferes with the tankguards made by Chris Barnes ( http://www.advrider.com/forums/showt...=111303&page=8 )? 2. Plate for 950 adv 2004: How much does it weight? Its also 5mm/3mm? Size of the boxes (approx.)? Is there a powdercoated version? (Picture in post #82 looks like powdercoated) I tried to PM Matt and sent an email already some weeks ago, but there was no answer, maybe something went wrong?

06-12-2012, 12:37 AM	#130
gatsch.hupfa Adventurer Joined: May 2010 Location: next to Vienna Oddometer: 13	Matt, I didn´t get PM or email tom

10-17-2012, 02:34 PM	#132
darenb68 Adventurer Joined: Jan 2008 Oddometer: 89	06 640 Adventure Bash plates Matt, you still in business? sent you an email. Would love one of these things

12-04-2012, 01:11 AM	#134
KTMatt ^OP Studly Adventurer Joined: Sep 2006 Location: Wollongong NSW Australia Oddometer: 727	The finished product Cheers Matt __________________ DSMRA Member # 1309 ROCK HARD RALLY GEAR Custom Aussie Made Bash Plates

12-04-2012, 01:26 PM	#135
darenb68 Adventurer Joined: Jan 2008 Oddometer: 89	Absolutely outstanding. Can you recap how it works? Does it come in both right and left versions? Are the loops on the bottom designed for attaching gear?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode