KTM Folding mirrors OEM $30.95 - Page 16

river251 · 12-02-2009, 08:55 PM

Here's a thought:

http://www.jcwhitney.com/SHOCK-ABSOR...;2002273;0;0;Y

Brown Dog · 12-03-2009, 07:48 AM

Quote:

Originally Posted by river251

Here's a thought:
http://www.jcwhitney.com/SHOCK-ABSOR...;2002273;0;0;Y

its gotta be 1.25 thread pitch. its got the 10mm size covered

hb7 · 12-03-2009, 08:55 AM

1. Yes, it will fit your Honda perches. 10mm x1.25mm right hand thread.
Bars mounts will fit the handlebars, if you choose bar mounts.

2. I'm not a fan of rubber isolators for mirrors because the rubber isolator is
too small to do much dampening IMO.

I prefer to fill the handlebars with lead shot if vibration is making your hands tingle. Some people now use silicone caulk. That's right, you fill the bars....

All the best,
Henri Baccouche
http://moto-science.com/
323-933-1366
skype shb777

river251 · 12-03-2009, 09:02 AM

Quote:

Originally Posted by hb7

1. Yes, it will fit your Honda perches. 10mm x1.25mm right hand thread.
Bars mounts will fit the handlebars, if you choose bar mounts.

2. I'm not a fan of rubber isolators for mirrors because the rubber isolator is
too small to do much dampening IMO.

I prefer to fill the handlebars with lead shot if vibration is making your hands tingle. Some people now use silicone caulk. That's right, you fill the bars....

All the best,
Henri Baccouche
http://moto-science.com/
323-933-1366
skype shb777

Thanks. Just to be clear, I dont' think my perches have a hole for a mirror. I meant do your mounts that mate up to perches, mount up to XRR perches. You probably understood that.

hb7 · 12-03-2009, 09:24 AM

No perch mount holes ? Yes, the BAR mounts will fit.
Here is a 280mm bar mount on a Honda xr650r.

Brown Dog · 12-03-2009, 10:51 AM

Nice HONDA. Me LIKE

Wattner I bet too

husky123 · 12-05-2009, 07:35 PM

hb7,

Just sent you an email and pm about my order. Thanks.

KTMSER · 12-07-2009, 07:59 AM

PM sent for another set...

river251 · 12-07-2009, 09:12 AM

Sorry, wasn't clear.

I think you sell mounts that replace 1/2 of your perch, the part facing you, in addition to the bar mounts. This has a hole in it to put the mirror into. Will those parts replace the back part on the XR650R perches?

Thanks.

hb7 · 12-07-2009, 10:00 AM

Actually, I have the Ducati Alu bar mounts which can fit any bike,
and the integral bar mount option for any KTM folding mirror.
The KTM half mount is here :
http://store.ktmtwins.com/58012040050.html

All the best,
Henri
http://moto-science.com/
323-933-1366
skype shb777

river251 · 12-07-2009, 11:13 AM

Quote:

Originally Posted by Rapid Dog

Henri, this is what I meant, trying to save bar space. But now I see it wasn't you that posted it. I emailed them to see if it fits XR650R stock perch. Thanks.

river251 · 12-07-2009, 11:15 AM

Quote:

Originally Posted by hb7

The KTM half mount is here :
http://store.ktmtwins.com/58012040050.html

Ah, you did post about a similar item. So the question is, will this fit the perch on an XR650R?

Do you have one handy to measure?

Thanks.

hb7 · 12-07-2009, 11:25 AM

How much are those clamps and where are they from ?

I have fitted the half clamp to a bunch of different bike (not a Honda yet...)
I think they will fit the Honda.....IMO.

river251 · 12-07-2009, 12:08 PM

Quote:

Originally Posted by hb7

How much are those clamps and where are they from ?

I have fitted the half clamp to a bunch of different bike (not a Honda yet...)
I think they will fit the Honda.....IMO.

If the KTM you linked will work I'd rather go with that, but it may not marry up to the Honda perch. The pic I posted is from earlier in this thread, there is a link to their website. It's $16 and change. There is a Honda on their page that the clamps is on, so maybe they have one. I'm at work now so don't have it handy.

hb7 · 12-07-2009, 12:40 PM

You may have to open the holes a little on the mount in the worst case.
It will probably line up IMO. I have never had a problem with using the half
shell mounts on various stock perches.

12-02-2009, 08:55 PM	#226
river251 Gnarly Adventurer Joined: Jul 2009 Location: Las Cruces, NM Oddometer: 158	Here's a thought: http://www.jcwhitney.com/SHOCK-ABSOR...;2002273;0;0;Y __________________ You're as happy as you think you are.

12-03-2009, 10:51 AM	#231
Brown Dog North Georgia Dual Sportr Joined: Nov 2008 Location: Calhoun, GA. USA Oddometer: 1,694	Nice HONDA. Me LIKE Wattner I bet too __________________ 2008 KTM 690 ENDURO with 2009 suspension & 950 SUPER ENDURO http://www.advrider.com/forums/showp...postcount=1784 http://www.advrider.com/forums/showp...postcount=8594 http://advrider.com/forums/showpost....&postcount=683 http://www.youtube.com/watch?v=gnFCdoc_IDE

12-07-2009, 09:12 AM	#234
river251 Gnarly Adventurer Joined: Jul 2009 Location: Las Cruces, NM Oddometer: 158	Sorry, wasn't clear. I think you sell mounts that replace 1/2 of your perch, the part facing you, in addition to the bar mounts. This has a hole in it to put the mirror into. Will those parts replace the back part on the XR650R perches? Thanks. __________________ You're as happy as you think you are.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-03-2009, 08:55 AM	#228
hb7 ^OP moto-science Joined: Jul 2007 Location: Lost, Still Lost......in Lost Angeles Oddometer: 266	1. Yes, it will fit your Honda perches. 10mm x1.25mm right hand thread. Bars mounts will fit the handlebars, if you choose bar mounts. 2. I'm not a fan of rubber isolators for mirrors because the rubber isolator is too small to do much dampening IMO. I prefer to fill the handlebars with lead shot if vibration is making your hands tingle. Some people now use silicone caulk. That's right, you fill the bars.... All the best, Henri Baccouche http://moto-science.com/ 323-933-1366 skype shb777

12-03-2009, 09:24 AM	#230
hb7 ^OP moto-science Joined: Jul 2007 Location: Lost, Still Lost......in Lost Angeles Oddometer: 266	No perch mount holes ? Yes, the BAR mounts will fit. Here is a 280mm bar mount on a Honda xr650r.

12-05-2009, 07:35 PM	#232
husky123 Beastly Adventurer Joined: Nov 2005 Location: Leesburg, VA Oddometer: 1,429	hb7, Just sent you an email and pm about my order. Thanks.

12-07-2009, 10:00 AM	#235
hb7 ^OP moto-science Joined: Jul 2007 Location: Lost, Still Lost......in Lost Angeles Oddometer: 266	Actually, I have the Ducati Alu bar mounts which can fit any bike, and the integral bar mount option for any KTM folding mirror. The KTM half mount is here : http://store.ktmtwins.com/58012040050.html All the best, Henri http://moto-science.com/ 323-933-1366 skype shb777

12-07-2009, 11:25 AM	#238
hb7 ^OP moto-science Joined: Jul 2007 Location: Lost, Still Lost......in Lost Angeles Oddometer: 266	How much are those clamps and where are they from ? I have fitted the half clamp to a bunch of different bike (not a Honda yet...) I think they will fit the Honda.....IMO.

12-07-2009, 12:40 PM	#240
hb7 ^OP moto-science Joined: Jul 2007 Location: Lost, Still Lost......in Lost Angeles Oddometer: 266	You may have to open the holes a little on the mount in the worst case. It will probably line up IMO. I have never had a problem with using the half shell mounts on various stock perches.