The BMW HP2 Megamoto thread.

[bikecat]

I'll send the pics to a friend of mine in the IT industry and see if he has any leads. Frankly I am not optimistic because the original lead is only 8-pin and the GS's is 30-pin, I can't see how the conversion can be done.

Will reply ya by PM, likely take up to a week or so.

Cheers

[ludger]

Originally Posted by Megaman

Here are some picks of the bike with HPN tank and Akrapovic system.

http://www.hpn.de/bilder/high_resolu..._megamoto1.jpg

obivously y.ou haven't ridden it yet.no colour on the pipes

[GSMarc]

Originally Posted by bikecat

Will reply ya by PM, likely take up to a week or so. Cheers

Thank you in advance,

[johnny moped]

http://advrider.com/forums/showthrea...&highlight=hp2

[bikecat]

GS Marc,

As I suspected, the connectors are different and it is hard to replace with a adaptor because the number of pins are different. It looks like the LCD screen was changed by BMW for GS/MM or for different production years.

Sorry that I can't help ya. Looks like an actual MM cluster is your only option.

Cheers

[GSMarc]

Thank you Bikecat

The HP2E cluster and R1200GS have the same 30 pins connectors.

The MM has only a 8 pins

I'm still searching a LCD but it's quite difficult to find...

[diranne]

Just installed a carbon belt cover - these used to be a nigh on A$1200 option at new in Australia and for some reason they are now down to $400 - and thats from the local BMW dealer!

[bikecat]

My experience with CF being in that area is that it is prone to pitting and damage.

Cheers

[hawideri]

Originally Posted by diranne

Just installed a carbon belt cover - these used to be a nigh on A$1200 option at new in Australia and for some reason they are now down to $400 - and thats from the local BMW dealer!

b[/IMG]

Some serious eyecandy
I hope they will throw that in the discount corner here in the EU as well.

Regards, hawideri

[GSMarc]

Originally Posted by GSMarc

2007 MM speedo LCD

I'm searching a new LCD for my speedo.
Does anybody know where I can find it before buying a new tachy ?
LCD connector is under the green light.

I have opened another MM tachy to see the LCD.
Written on the LCD upper left side : 07 12 25 MA

only 8 connectors

[bikecat]

Anyone used or using a BoosterPlug or Wunderlich controller?





I am curious ... very curious .... I know the BMWs run lean, and want to improve on that.

Cheers

[GSMarc]

Hi Bikecat,

I went with RapidBike EVO 019L and K&N filter and Full Remus exhaust.

I'm VERY satisfied

http://jemelapetenflat.xooit.be/t322....htm?q=dyno%2A

[hillbillypolack]

Originally Posted by bikecat

My experience with CF being in that area is that it is prone to pitting and damage.

Cheers

+1, especially in the blast radius of that front wheel. Lay on some 3M stone chip film, you'd protect it as well as be able to enjoy the carbony look.

[Ron50]

Originally Posted by bikecat

Anyone used or using a BoosterPlug or Wunderlich controller?


I am curious ... very curious .... I know the BMWs run lean, and want to improve on that.

Cheers

I'm very happy with the results from the Accelerator, especially at the price. Check out my post from 6 September last year. No noticeable increase in fuel consumption either.

[Macroenie]

Originally Posted by bikecat

Anyone used or using a BoosterPlug or Wunderlich controller?

I am curious ... very curious .... I know the BMWs run lean, and want to improve on that.

Cheers

See my post here

The wunderlich controller gives you more options over the rev-range. The other one just fools the injection by use of a temperature related resistance, making it think it is about 10 degrees celsius colder en thus it will richen the mixture.

If you take away the cat. or put a 'sport' exhaust on the MM you will have to take measures for it not running to lean.