The I LOVE THIS GUN Thread - Page 1491

FPGT72 · 12-07-2011, 04:49 AM

Quote:

Originally Posted by Cumminsman76

For you Glock guys.

Funny....dang that was the best hitler rant yet...I love the part about carry...it is funny...bad choice in font and color tho.

Sniper X · 12-07-2011, 09:13 AM

Ordered from Hogue on Monday, and they should be here today. Consists of a MSH and grips with integral mag well. I first felt them on my Sig Scorpion and LOVE them Kills two birds and what not. Here's a pic of the new grips which I will install on Project Overly expensive RIA TAC, and another pic of the Scorp with them as stock.

I got the arched MSH version for the Tactical model since I love arched MSH's and the other difference is the new ones are more grey green than green camo like the stocks on the scorpion. Plus, the new ones are smooth, as smooth as G10 can be!

EvilGenius · 12-07-2011, 09:51 AM

Quote:

Originally Posted by Sniper X

Ordered from Hogue on Monday, and they should be here today. Consists of a MSH and grips with integral mag well. I first felt them on my Sig Scorpion and LOVE them Kills two birds and what not. Here's a pic of the new grips which I will install on Project Overly expensive RIA TAC, and another pic of the Scorp with them as stock.

I got the arched MSH version for the Tactical model since I love arched MSH's and the other difference is the new ones are more grey green than green camo like the stocks on the scorpion. Plus, the new ones are smooth, as smooth as G10 can be!

So you already got the target slide?

Sniper X · 12-07-2011, 09:57 AM

Quote:

Originally Posted by EvilGenius

So you already got the target slide?

Nope, Hogue pic they picture all their 1911 grips with that system now to try to get everyone who visits to say WTF is that?

Sniper X · 12-07-2011, 09:58 AM

They are going on this, Project too much $ RIA Tactical.

EvilGenius · 12-07-2011, 10:24 AM

Quote:

Originally Posted by Sniper X

They are going on this, Project too much $ RIA Tactical.

Ah.

Sniper X · 12-07-2011, 10:37 AM

Quote:

Originally Posted by EvilGenius

Ah.

I really have only $298.00 into it in parts including the grips now. so IF I had bought the gun instead of gotten it free in trade, I would only have 750.00 into a totally tricked out 1911. However, since I also have to consider IT WOULD have cost $500.00 if I had had to buy it, I guess it is now worth at least $800.00. It does have all tool steel Wilson parts in it, and a nice 4lb trigger, and the barrel bushing and fitted barrel, and now the grips will be on it today or tomorrow.

ct-ktm · 12-07-2011, 10:37 AM

Hey Russ, You into guns..I get my first .22 in a couple days..

Quote:

Originally Posted by Rusty Rocket

They are at every show, even the holiday craft shows my wife goes to.

The_Commander · 12-07-2011, 10:38 AM

Just fired up our new "latest and greatest" curing oven. The warning sticker says "keep two feet clearance from sides, back and top" but the anti-tip over bracket is about about 6" long.

If it doesn't burn the building down we'll be able to coat and cure much longer barreled actions than we could yesterday.

EvilGenius · 12-07-2011, 10:40 AM

Quote:

Originally Posted by Sniper X

I really have only $298.00 into it in parts including the grips now. so IF I had bought the gun instead of gotten it free in trade, I would only have 750.00 into a totally tricked out 1911. However, since I also have to consider IT WOULD have cost $500.00 if I had had to buy it, I guess it is now worth at least $800.00. It does have all tool steel Wilson parts in it, and a nice 4lb trigger, and the barrel bushing and fitted barrel, and now the grips will be on it today or tomorrow.

Hot damn!

Sniper X · 12-07-2011, 10:42 AM

Quote:

Originally Posted by The_Commander

Just fired up our new "latest and greatest" curing oven. The warning sticker says "keep two feet clearance from sides, back and top" but the anti-tip over bracket is about about 6" long.

If it doesn't burn the building down we'll be able to coat and cure much longer barreled actions than we could yesterday.

COOL! Nice to have new tools that actually MAKE you money huh?

Sniper X · 12-07-2011, 10:45 AM

Quote:

Originally Posted by EvilGenius

Hot damn!

here's a list of what I have done

stoned trigger track, stoned, fitted all new Wilson Bullet Proof tool steel parts, sear, disconnector, hammer, fitted Briley spherical barrel bushing, and am going to fit and install MSH and integral mag well grips.

Rusty Rocket · 12-07-2011, 11:31 AM

Quote:

Originally Posted by ct-ktm

Hey Russ, You into guns..I get my first .22 in a couple days..

, but not as deep as some.

check: http://advrider.com/forums/showthread.php?t=450032

ct-ktm · 12-07-2011, 11:45 AM

Hahaha ..yeah I see some people love guns...

A friend took my skeet shotting last year what a blast...a couple of his other friends were all pissy after I hit 3 for 3 about ten times in a row..

EvilGenius · 12-07-2011, 11:54 AM

Quote:

Originally Posted by The_Commander

Just fired up our new "latest and greatest" curing oven. The warning sticker says "keep two feet clearance from sides, back and top" but the anti-tip over bracket is about about 6" long.

If it doesn't burn the building down we'll be able to coat and cure much longer barreled actions than we could yesterday.

How many pizzas can you fit in it?

12-07-2011, 09:13 AM	#22352
Sniper X De Oppresso Liber Joined: Jul 2006 Location: Central New Mexico, 7420ft above sea level Oddometer: 30,297	Should be getting these grips today Ordered from Hogue on Monday, and they should be here today. Consists of a MSH and grips with integral mag well. I first felt them on my Sig Scorpion and LOVE them Kills two birds and what not. Here's a pic of the new grips which I will install on Project Overly expensive RIA TAC, and another pic of the Scorp with them as stock. I got the arched MSH version for the Tactical model since I love arched MSH's and the other difference is the new ones are more grey green than green camo like the stocks on the scorpion. Plus, the new ones are smooth, as smooth as G10 can be! __________________ "I claim to be frightened of horses but do so only to get out of attending parades. It's peculiar but ...it works. The Horses get it. RESISTANCE IS NOT FUTILE. IT'S VOLTAGE DIVIDED BY CURRENT

12-07-2011, 09:58 AM	#22355
Sniper X De Oppresso Liber Joined: Jul 2006 Location: Central New Mexico, 7420ft above sea level Oddometer: 30,297	They are going on this, Project too much $ RIA Tactical. __________________ "I claim to be frightened of horses but do so only to get out of attending parades. It's peculiar but ...it works. The Horses get it. RESISTANCE IS NOT FUTILE. IT'S VOLTAGE DIVIDED BY CURRENT

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

12-07-2011, 10:38 AM	#22359
The_Commander The Man. Joined: Oct 2005 Location: Neyland Oddometer: 5,423	Just fired up our new "latest and greatest" curing oven. The warning sticker says "keep two feet clearance from sides, back and top" but the anti-tip over bracket is about about 6" long. If it doesn't burn the building down we'll be able to coat and cure much longer barreled actions than we could yesterday.

12-07-2011, 11:45 AM	#22364
ct-ktm Beastly Adventurer Joined: Aug 2008 Location: New England Oddometer: 2,748	Hahaha ..yeah I see some people love guns... A friend took my skeet shotting last year what a blast...a couple of his other friends were all pissy after I hit 3 for 3 about ten times in a row..