ADVrider

Go Back   ADVrider > Bikes > Thumpers
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
Old 02-02-2013, 09:56 AM   #15916
Kiko
Beastly Adventurer
 
Kiko's Avatar
 
Joined: Feb 2006
Location: Jalisco, Mexico 45825
Oddometer: 1,818
Quote:
Originally Posted by AirCommando View Post
I just purchased a used MIKUNI TM40 and was hoping to get some inmate info on initial settings.

My XRR is uncorked with factory exhausted. Factory air cover. Here in Tucson my play area is 2000'-6000' and 80-100 degrees.

Looking for MJ #, PJ # and needle positions.

Thank you.
1.2 air jet, 25 pj, 140 mj, and clip 4 down (with washer under clip) on the needle works for me. A lot will depend though on how the exhaust tip was modified when the bike was uncorked, You'll be lucky if you get it tuned right quick, mine is real finicky. You may need to tweak the AP adjustment with a small gap in case you get a bog when you whack the throttle. Good luck.
__________________
Conmigo piscas, y no moloncos.
Kiko is offline   Reply With Quote
Old 02-02-2013, 11:06 AM   #15917
KYLEISCOOL
Who
 
KYLEISCOOL's Avatar
 
Joined: Dec 2010
Location: So. Cal. U.S.A
Oddometer: 144
Quote:
Originally Posted by bamfslap View Post
Hell yeah! Nice to see someone else jump the pig. Though I haven't done any fancy tricks yet (unless you count and accidental super man).
As long as you looked good doing it Thanks AJ.
__________________
Gotta ride something! 02' XR650R slightly personalized
KYLEISCOOL is offline   Reply With Quote
Old 02-02-2013, 12:38 PM   #15918
mdlak
Gnarly Adventurer
 
Joined: Jul 2010
Location: GTA
Oddometer: 202
Kyle IS cool!

Great pic!
mdlak is offline   Reply With Quote
Old 02-03-2013, 08:31 AM   #15919
AirCommando
Adventurer
 
AirCommando's Avatar
 
Joined: Feb 2010
Location: Tucson, AZ
Oddometer: 44
Inmates, here is the gas lines that came with my used TM40. Which goes to the tank and what's is the other one for?

Thank you.




__________________
RJ Nelson
'09 R1200GSA
AirCommando is offline   Reply With Quote
Old 02-03-2013, 08:41 AM   #15920
larryboy
Chopper Rider
 
larryboy's Avatar
 
Joined: Jan 2005
Location: On a set of 50,000 mile tires.
Oddometer: 14,954
Quote:
Originally Posted by AirCommando View Post
Inmates, here is the gas lines that came with my used TM40. Which goes to the tank and what's is the other one for?

Thank you.




That is a T setup for dual petcocks like on the big Acerbis tank.
__________________
Be sure the safest rule is that we should not dare to live in any scene in which we dare not die. ~Lewis Carroll~
larryboy is offline   Reply With Quote
Old 02-03-2013, 08:56 AM   #15921
AirCommando
Adventurer
 
AirCommando's Avatar
 
Joined: Feb 2010
Location: Tucson, AZ
Oddometer: 44
Thanks for the info. Any recommendations on where to attach the choke cable?
__________________
RJ Nelson
'09 R1200GSA
AirCommando is offline   Reply With Quote
Old 02-03-2013, 11:57 AM   #15922
larryboy
Chopper Rider
 
larryboy's Avatar
 
Joined: Jan 2005
Location: On a set of 50,000 mile tires.
Oddometer: 14,954
Quote:
Originally Posted by AirCommando View Post
Thanks for the info. Any recommendations on where to attach the choke cable?

Some place it will reach and you can reach with the tank on. Make sure it doesn't pull on the 90*, fragile plastic that breaks easily.
__________________
Be sure the safest rule is that we should not dare to live in any scene in which we dare not die. ~Lewis Carroll~
larryboy is offline   Reply With Quote
Old 02-03-2013, 03:49 PM   #15923
pwrtrippin
Gnarly Adventurer
 
Joined: Jun 2009
Location: Woodland Park,CO
Oddometer: 443
TM40 cable choke

Right about here, it takes a little tweak to the bracket but ends up under frame line so its safe from boots, branches etc. Also can turn it off with the side of your boot.

__________________
Me for a Politically Correct free America.

There is nothing manly about tassels.
pwrtrippin is offline   Reply With Quote
Old 02-03-2013, 03:52 PM   #15924
dirtyoffroad
Studly Adventurer
 
dirtyoffroad's Avatar
 
Joined: Jan 2008
Location: merrimack,N.H.
Oddometer: 539
Quote:
Originally Posted by AirCommando View Post
I just purchased a used MIKUNI TM40 and was hoping to get some inmate info on initial settings.

My XRR is uncorked with factory exhausted. Factory air cover. Here in Tucson my play area is 2000'-6000' and 80-100 degrees.

Looking for MJ #, PJ # and needle positions.

Thank you.
Same question but maybe from 0-1000' elevation?
__________________
07 Honda XR 650R
11 BMW R1200GSA
dirtyoffroad is offline   Reply With Quote
Old 02-03-2013, 05:32 PM   #15925
HeadShrinker
Lost for a Reason
 
HeadShrinker's Avatar
 
Joined: Jan 2009
Location: Cortez, Colorado & Navajo Nation
Oddometer: 1,457


Just picked up this 03 and shredded my plate the first time out...

Where has she been all my life???
HeadShrinker is offline   Reply With Quote
Old 02-03-2013, 05:49 PM   #15926
jm-2008
Studly Adventurer
 
jm-2008's Avatar
 
Joined: Sep 2008
Location: South Eastern Australia
Oddometer: 513
[QUOTE=AirCommando;20633361]I just purchased a used MIKUNI TM40 and was hoping to get some inmate info on initial settings.

My XRR is uncorked with factory exhausted. Factory air cover. Here in Tucson my play area is 2000'-6000' and 80-100 degrees.

Looking for MJ #, PJ # and needle positions.

Thank you


This works well for mine -
Pilot = 25
Pilot Air Jet = 1.1
Jet Needle = 9DJ1 third groove down from the top (plastic washer underneath)
Needle Jet = Y4
Main = 140

Mainly ride around 2-4000 ft altitude
Side cover stock
Exhaust stock - uncorked (think the US versions you need to take out the centre of the cap with a hole saw)
Stock ignition

The settings above will get you in the ball park and from there its little steps at a time.

Good luck.
jm-2008 is online now   Reply With Quote
Old 02-03-2013, 05:53 PM   #15927
CharlieXR4
Adventurer
 
CharlieXR4's Avatar
 
Joined: Jun 2012
Location: Tucson, AZ
Oddometer: 59
I just picked one up myself

 photo 2013-02-03_18-09-54_991_zps69f1f47e.jpg
CharlieXR4 is offline   Reply With Quote
Old 02-04-2013, 07:28 PM   #15928
AirCommando
Adventurer
 
AirCommando's Avatar
 
Joined: Feb 2010
Location: Tucson, AZ
Oddometer: 44
MIKUNI TM 40 idling problems.

Here is my situation:

I am at 2000'. I am running a 22.5 PJ and a 1.2 AJ. The pilot screw is set at three turns open per the manual as a starting place for tuning.

The bike starts fine on the first kick and idles with the choke on. It dies shortly after the choke is turned off.
With the choke off the bike will start momentarily and then die. If I catch it running with the throttle it will rev and is rideable. Coming back down to idle it dies.

I am wondering if it could be the float level, the manual does mention a too high of a float level making idle tuning impossible.


Second question, what is a good initial place to set the idle adjuster. Once it is idling of course.

Any thoughts are appreciated.
__________________
RJ Nelson
'09 R1200GSA
AirCommando is offline   Reply With Quote
Old 02-04-2013, 11:38 PM   #15929
Sean-0
straya carnt
 
Sean-0's Avatar
 
Joined: Oct 2010
Location: Mumblebum Northern NSW
Oddometer: 4,429
Can xrr carry weight?

i reckon they can now




the added plate near the bolt mount will stop a lot of the side flex causing the ally to fatigue

nice work poppy
Sean-0 is offline   Reply With Quote
Old 02-04-2013, 11:41 PM   #15930
Beserker
Red Rider
 
Beserker's Avatar
 
Joined: Sep 2007
Location: Down South
Oddometer: 94
Quote:
Originally Posted by Sean-0 View Post
Can xrr carry weight?
nice work poppy
Indeed...how much does it weigh compared to the stock item?
Beserker is offline   Reply With Quote
Reply

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 04:53 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2015