Handlebar anti vibration breakthrough

[ACDNate]

Ok so i was checking these out and can't figure something out. Do these have some kind of bar end on them? Or would you need to have some closed end grips to cover up what's left?

[R_W]

Originally Posted by LukasM

Will these work with threaded bar end inserts?

I could (so I am sure you could) get it to work...ONCE. But it wouldn't come apart again (not if you used loctite on the inserts, anyway). You need to wait for the BMW solution.

[bimmerxi]

Originally Posted by RicorSHX

We're getting allot of requests for the BMW's. Unfortunately the bars aren't compatible with our system right now. Because of requests, we're going to design a BMW external bar end version soon. I will keep you posted.

Let me know when you have a BMW version. I have a R1200GS w/heated grips, and handguards

[Chipper]

KTM 950, stock bars, acerbis multiplo hanguards, kaoko(?) throttle lock. Will they work with this setup ricor? Previous poster asked about this but never answered.

[RicorSHX]

Originally Posted by ACDNate

Ok so i was checking these out and can't figure something out. Do these have some kind of bar end on them? Or would you need to have some closed end grips to cover up what's left?

The stainless steel button head bolt would be exposed. It would look better with new grips. For our shop SV, we bought Ducati plastic plugs for $1.99 each. IMO, they didn't look good. Currently our machining capacity is maxed out, otherwise we would be making bar end weights that attach directly to the Vibranator. If you can find a bar end weight that only goes in about an inch, that would work good.

[RicorSHX]

Originally Posted by roborider

I have an '02 V-Strom DL-1000 with Bark Buster handguards and the integrated Bark Buster bar ends on the stock 7/8" handlebars.

Would your product work with my setup, and if so, which model/type should I order?

Thanks,
Rob

I looked up the Bark Buster bar end anchors on their website. The Vibranator anchoring system is compatible with that type as long as the bolt threads are 8mm X 1.25. Everyone else (Acerbis, Cycra,etc) uses that thread pitch. On the website, the hand guard for all bars is the model you want. We've had great results with the DL1000. The only complaint was the owner had to watch his speedometer instead of using the buzz to know he was speeding. Almost got a ticket at 85 mph.

[RicorSHX]

Originally Posted by Chipper

KTM 950, stock bars, acerbis multiplo hanguards, kaoko(?) throttle lock. Will they work with this setup ricor? Previous poster asked about this but never answered.

RXV Poor installed them with a throttle lock on his KTM 950. I think he runs handguards too. Can you PM him? All I know is that he got the hand guard model and he liked them.

http://www.advrider.com/forums/showt...ht=Vibranators

[Chipper]

Thanks ricor, pm'ed him.

[HaChayalBoded]

If you want to sell even more offer it up to the folks on the Kawasaki Concours forum. Half the bikes that came out of the factory had the buzziest handlebars in the industry. luckily mine wasn't made on a Friday afternoon.

Would this work on a concours? I'm running helibars on mine, I'm guessing its a 7\8th bar

[MTDewX8]

well I got new bars cause BMW ones dont work. but waiting for feed back. seat is shipped off so this owuld be the best time to be tinkering.

no money taken yet, but figured there waiting till they ship them.

any Idea's on shipment time frame?

[crawdad]

Ricor, are the vibranators compatible with the Highwaydirtbikes handguards?

[TEZZA]

Hi RicorSHX , are you still discounting the vibanator inserts and are they priced as a pair or is the price for 1 insert.Please PM me .
Tezza.

[robertaccio]

Looks great with good engineering tech! Very good item.

[HaChayalBoded]

Originally Posted by TEZZA

Hi RicorSHX , are you still discounting the vibanator inserts and are they priced as a pair or is the price for 1 insert.Please PM me .
Tezza.

something tells me they come in pairs.

[SonnyAZ]

Do they work better than Bars filled with sand?