Old's Cool Flea Market

[Ron In Buffalo]

SOLD--1977 r100/7 (black) mileage over 140k not a garage queen daily rider has a vetter and krauser bags--I have the headlight and turn signals to change it back. New rings and pistons 25k ago. Rebuilt heads at the same time valve guides, seats and exhaust valves replace. Also timing chain and tensioner. Carb rebuilt 15k ago . Splines lube, front forks and steering bearings replace. Transmission rebuilt 2 yrs ago. Needs someone who will love it again. I have own this bike for over 20 yrs. I think it time to let it go. Want to trade for a k bike same value or 2777.77 obro. Clean Title. It runs great only needs a rider. New tires and brake shoes and pads less than 1k on them. If interested pm me.

[bradatlarge]

1971 BMW R60/5 - Barn find - three owner bike (including me), purchased last April in Tennessee (current TN title, yes, its true I haven't registered it yet, is from the early eighties, second owner).

Almost all mechanical work has been done by Glen Bishop of Thoroughbred Cycles.

Unless otherwise noted, all parts are BMW factory sourced through either Glen or BMW Milwaukee. All paint on the tank, fenders, frame, etc is original and reflects the 40 years of life that it has on it. Its not perfect but, its gorgeous in its own way. If you had a mind to complete a full restoration on this bike, it would be a simple matter to get the remaining parts cleaned / painted, etc.

All electrics inside the headlight shell have been thoroughly reviewed. Everything is in top working order, inclusive of indicator lights on the speedo face.

Here's a list of all the things that have been replaced or refurbished or fixed (that I can remember at least):

New Tires (and tubes), less than 500 miles on them - Pirelli Diablo
New Brake line - front & rear
New hand grips (originals retained)
New throttle tube
New throttle linkage
New throttle cable (short)
Low bars (aftermarket - originals retained)
Bar end mirrors (aftermarket)
New (take off from a correct model year bike) front cover / alternator cover
New steering head bearings
New "sport" fork springs (originals retained)
New fork internals (and oil)
New fork boots (correct rib count)
New rear shocks (Progressive, not period / model correct)
New alternator / battery cables (high capacity, aftermarket)
New spark plug wires
New spark plugs
New tank bumpers
New wiring loom separator block
New main wiring harness (front & back)
Fuel filters installed, between gas tank and carbs
Carbs rebuilt
New air cleaner and airbox cleaned
New, higher capacity oil pan installed
(all oil systems - pickup, sending tube, etc - were cleaned and inspected during this process and new gasket was installed)
Missing parts of batter box / retainer replaced.
Refurbished final drive / rear wheel / braking system installed
Crank case vent hose installed (ugly)
New (corrected) exhaust system installed from headers back
New exhaust nut (replacement for broken fin)
New seat 'hinges' and bumpers installed
New key with correct plastic head

Essentially, every rubber or plastic part on this bike that showed even the possibility of failing, has been replaced.

The engine was completely torn down and rebuilt over the winter, as well. Any miles on it are purely "break in" miles put on the bike by the mechanic that handled the rebuild....







As of today, I've got north of $7000 into this bike. Its yours for $4500 or best offer....like I said, my dog needs an expensive surgery and therefore, my toy / project needs to find a new home, asap.

[Ben Carufel]

WANTED: Slash 6 seat. Stock style. Looking for something in excellent condition, not wanting to re-cover.

Thanks!

[JohnLocke]

R90 Seat - stock or aftermarket.
Need a seat for an 1974 R90.


PM me with what you have, price, condition, etc,

[bmweuro]

Originally Posted by Ben Carufel

WANTED: Slash 6 seat. Stock style. Looking for something in excellent condition, not wanting to re-cover.

Thanks!

Originally Posted by W8EJO

R90 Seat - stock or aftermarket.
Need a seat for an 1974 R90.


PM me with what you have, price, condition, etc,

It would be cheaper in the end to buy a reproduction seat for both of you and a lot less work.

[Ben Carufel]

Originally Posted by bmweuro

It would be cheaper in the end to buy a reproduction seat for both of you and a lot less work.

By reproduction do you mean something like a Corbin Gunfighter?

[melville]

Originally Posted by Ben Carufel

By reproduction do you mean something like a Corbin Gunfighter?

MotoBins has a stock appearing repro in both 'budget' and 'deluxe.' Budget has a plastic base and I'm happy with mine so far. Deluxe is spozed to be resto quality, German made, etc.

[ed mocz]

Here's some pics, good for ten days.
http://edmocz.smugmug.com/Motorcycles/photos/22716336_mrJNSP#!i=1821062552&k=cmXKdBB
Asking #1,750.00 or offer. Give me a call: 262-496-6027.

[rixcafe]

Rusty but straight and servicable.

Free to one in need. You pay shipping.

Rick

[pckopp]

Gone to a new home.

[k12lts]

I need some stock saddlebag mounts for Krauser bags on an 81 R100. The bags have the "seat belt" type latches.

Let me know what you have.

[beeks76]

WTB Looking for a stock muffler and collector for a 1989 R100GS. Let me know what you have. Thanks.

[henrymartin]

I'm looking to buy a couple of things:

For 1977 XS650 : Complete Exhaust in good or great shape (stock or Mac or Kerker), fork tubes without pits and straight, gauges, shocks (progressive, or whatnot)

For 1975 CB550: Complete exhaust (4-4, 4-2, 4-1 does not matter, but must be good), rear shocks

Thanks, PM me if you have any of those. I'd rather pay an inmate than spending it on ebay.

[Itsalljunkfromearth]

http://www.ebay.com/itm/BMW-AIRHEAD-...9d2534&vxp=mtr


just a heads up for anyone interested

[boxerboy81]

Not available to Australia.