|07-08-2014, 06:39 AM||#16|
Mine goes to 11
Joined: Mar 2008
Location: Wawa, ont, Canada
2008 aprilia 450 rxv
450 V TWIN.
APPROX 5000 KMS (about 4k was previous owner road miles).
uncorked and desmogged
I set this bike up for the Dacre Rally on team Repeat Offenders this year and it worked flawlessly.
I don't get a lot of time for riding off road. (Dacre was the only oportunity I had this year so far) so no use having it sitting around.
I will sell it in stock form $4500 including:
seat concepts seat and stock seat.
light and heavy rear springs.
3 gearing combos.
spare set of tires.
stock and AF1 racing dual stage air filter
stock and aftermarket lowered pegs.
bark busters with integral signal lights.
smaller rear signals
compact led rear taillight and plate mount.
I will include at extra cost or sell separately.
20l safari tank
fmx high bars
Rigid led aux lights
As set up for Dacre.
I also have the Garmin 376 and mount pictured above that could be included at extra cost.
The more side roads you stop to explore, the less likely that life will pass you by. ~Robert Brault. 2004 KTM 950 S GO!!!!(Blacked out),03 Beta Rev3, 1973 Rokon Trailbreaker 2x2, 1999 Intruder 1500, 08 Aprilia rxv450, 90 DRBIG 800,79GS850
FINNDIAN screwed with this post 07-08-2014 at 06:45 AM
|07-11-2014, 03:50 PM||#17|
Joined: Mar 2007
Location: Dumpmere - Muskoka
Used tires that fit a BMW GS 800 in Muskoka
I've found the tires I like, so everything else has to go!
Hideneau K60 Rear - 150/70-17. This tire has had the continuous center band carved up with a tire groover. It ain't pretty, but it works! $50
Pirelli Scorpion Trail Set - Front and rear. Less than 1000 kms $175 for the set.
All tires are pick-up in Muskoka only!
I'm adorable........and I smell nice!
|07-11-2014, 08:23 PM||#18|
One Among the Fence
Joined: Dec 2013
I have for sale a pair of River Road Twin Iron Gloves, Size Medium. 40$ Plus Shipping.
These are brand new, never used still with tags on them. I would like to get 40$ Plus shipping, which i can only assume is cheap on these.
They are black, armoured knuckles, leather, some minor padding on the palm, and gussets on the fingers joint and perforation on top hand. These are very comfortable gloves, and look fantastic.
This is my second pair I bought as a back up for my first - but the first are still going strong so i figured its time to let go of these.
2008 Honda CBR125r
|07-12-2014, 05:46 AM||#19|
Joined: Aug 2002
Location: Orangeville Ontario Canada
Alpinestar Tech 7 Boots
Good shape and plenty of Adventure left in them! ADV pricing @ $60.00. Size 9/Euro 43. PM if interested...Steve
Any day on the bike is a GOOD day!
SteverinoB screwed with this post 07-14-2014 at 06:06 PM
|07-12-2014, 09:43 AM||#20|
Joined: May 2012
Location: Toronto, Canada
KTM 530 EXC for sale, has been incredibly well looked after and is ready to go! Ever ridden a 530? Well there is nothing that even comes close on the trails, ride it all day and just float of all the rough stuff and hardly feel it! Price is $5995.
Elka Steering Damper
Acerbis big tank (about 11-12 liters)
Seat Concepts seat
New chain and sprockets with KTM steel and aluminum rear sprocket.
Full Fan Kit (Genuine KTM)
Pair of new Michelin T63's
Cycra probend handgaurds
Apico gear and rear brake levers
And a handful of other items like pads, grips etc this winter. A valve check was also done.
Only notable mark is a dink in the header pipe, this has been there since I bought it rear plastics a little dull due to the Giant Loop. All cleaned up and ready to go with a box of stock parts like tank etc. I also have a rotopax, Giant Loop bag, GPS etc for extra $$. May entertain a trade on a 690?
More pics can be found at: http://www.screencast.com/t/HX3q9xKoebyy
avsjack screwed with this post 07-12-2014 at 10:04 AM
|07-15-2014, 01:28 PM||#21|
High on life!
Joined: Oct 2008
Location: Niagara Falls
First Gear Torrent Mesh Jacket XL
I have a really nice First Gear Torrent Mesh Jacket
I purchased it from another inmate but it is too big for me.
I is in perfect condition and comes with a waterproof liner.
This is the 3/4 length jacket.
I paid $100.00 for the jacket and would like to get the same.
I am located in Niagara Falls
intotheabis screwed with this post 07-20-2014 at 04:35 PM
|07-15-2014, 04:01 PM||#22|
Joined: Jun 2006
Location: Moncton, New Brunswick, Canada
KLIM Traverse Jacket with armor XXL
So I lost a bunch of weight this spring and this no longer fits. It's been used but is in great shape - no tears or rips, all zips, velcro and fasteners work as they should. I plan to replace it with another KLIM.
$250 plus shipping
Included in the sale is the optional KLIM D3o armor
From the KLIM website:
GUARANTEED TO KEEP YOU DRY®
HEAVY-DUTY GORE-TEX® FABRICS
840 DENIER CORDURA® OVERLAYS IN HIGH WEAR AREAS
840 DENIER CORDURA® DEVELOPED FROM THE GROUND UP SPECIFICALLY FOR THIS TYPE OF OFF-ROAD RIDING GARMENT
TWO STORM-FLAP-COVERED YKK® ZIPPER HAND POCKETS
ONE STORM-FLAP-COVERED YKK® ZIPPER CHEST POCKET
ONE INTERNAL YKK® ZIPPER POCKET
TWO-WAY HEAVY-DUTY YKK® VISION 8 CENTER-FRONT ZIPPER COVERED BY EXTERNAL STORM FLAPS
BOTTOM HEM SHOCK-CORD AND ADJUSTERS
SOFT MICRO-FLEECE-LINED COLLAR
TWO ADJUSTABLE PIT-VENTS WITH TWO-WAY YKK® ZIPPERS
LATERAL ADJUSTABLE BACK VENT
ALL ZIPPERS COVERED WITH STORM FLAPS TO MAINTAIN WATERPROOFNESS AND TO STOP DEBRIS
INNER CUFF GASKET
ADJUSTABLE VELCRO CUFFS
3M SCOTCHLITE™ INDUSTRIAL-GRADE REFLECTIVE PANELS
SHOULDER AND ELBOW PAD POCKETS
MOISTURE-WICKING POLYESTER MESH LINER
ARTICULATED SLEEVES PROFILE FOR RIDER POSITIONING
DESIGNED TO BE WORN OVER POLYESTER BASE LAYER
CLOSER FIT REDUCES DRAG AND KEEPS JACKET IN PLACE
GLOVE-FRIENDLY ZIPPER PULLS
EMBROIDERED KLIM LOGOS
|07-15-2014, 04:17 PM||#23|
Joined: Jun 2006
Location: Moncton, New Brunswick, Canada
KLIM Traverse pants with Armor 42reg
After losing a bunch of weight this spring these no longer fit me. They are used but in good condition. They have been laundered but still show some traces of dirt from off-road riding in a couple of the creases. All zips, snaps and fasteners work as they should. The optional KLIM D3o knee armor is included in the sale.
$200 plus shipping
There is are a few abrasions low on the legs from normal use. There is one tiny tear on one leg, very close to the bottom which, as far as I can tell, does not penetrate the GoreTex membrane - at any rate, it's about ankle height or lower.
They fit well when riding but when walking were a bit long for my 30" inseam, so there's a tiny bit of wear at the cuff - does not affect their use.
|07-16-2014, 07:41 AM||#24|
Joined: Jan 2010
Location: Toronto, Canada
For sale in the flea market - Arai Corsair V helmet in large, Toronto
Here's a link to the flea market ad...
KTM 1190 ADV - pink letters covered with carbon now :)
2005 Ducati 999R - bucket list must-have
And how can this be? For he is the Kwisatz Haderach!
|07-16-2014, 08:51 AM||#25|
Joined: May 2009
FOR SALE: BMW Savanna 2 suit
I bought this BMW Savanna 2 suit two weeks ago, and oh... how I wanted it to fit me! But alas... I accept the fact that I simply can't fill it out.
It's a size 46 US (56 EU). It's in fantastic condition: no tears, wear, or stains. Gore Tex liner in jacket and pants, armour in shoulders, elbows, and knees (no back for some reason), and everything functions as it should. Looks brand new.
$300. plus shipping
Drop me a pm if you're interested.
|07-16-2014, 06:27 PM||#26|
Joined: May 2009
Location: Smithers British Columbia
2005.5 KTM Aventure 950 for sale
bike is in good shape and very clean
it has 60,000 km on it
riders edge suspension revalved and lengthened to S spec
new woody's front wheel
motomaster 4 piston super moto front brake
aftermarket aluminum skid plate
highway dirt bike hand guards
heated grips 2 windows, high and low
new heidenau k60 tires
new chain and sprockets
lots of other add ons and upgrades
bike is located in smithers B.C. my phone # is 250-847-0093 phone me or pm me for pictures as I can't post them
|07-16-2014, 10:51 PM||#27|
Joined: Aug 2005
Location: Kelowna, BeeCee
Hmmm...it used to be here. Pants are a different post. Jacket was tried on. Tags in the pocket. Comes with liner. Brand spanking and too large for my petite wife. Size 10-12. Suited for females but it seems unisex.
Whole shebang (jkt and pants and liners and tags): $325
2007 R1200GS Adv
2002 R1150GS Adv (gone)
1975 R90S Daytona Orange (gone)
1972 R75/5 Toaster Tank (gone)
1971 R75/5 (gone)
1987 K100LT (gone)
|07-18-2014, 10:20 PM||#28|
Joined: Apr 2010
Location: Ottawa, ON
2012 bmw r1200gs
Looking for a quick sale of my 2012 BMW R1200GS. The bike currently has around 17,500 kms on it and is under warranty until May, 2015. It is fully loaded other than the BMW alarm system - ABS, trip computer, etc.
Priced for a quick sale at $18,000.
The bike is farkled to the max. You won't have to spend another dime on it before heading out on your around-the-world tour. Here's the list, and I'm sure I'm forgetting some:
- Akropovic full exhaust system, including cat-removing header and rear silencer - reduces weight by close to 15 lbs (~$1,300)
- DynoJet PC-V and autotune - see dyno testing results here (~$800)
- Skid plate and kickstand guard by TwinHeadlightErnie (2 mm stainless steel - tough as hell)
- Footprint for kickstand by TwinHeadlightErnie
- Kildala covers for front and rear brake reservoirs, clutch reservoir, and the thing by your right rear ankle
- MachineArt Moto head guards
- PIAA front light bar
- Twisted Throttle Denali dual density lights switchable with standard headlight switch (I probably want to keep these)
- Rick Mayer custom seat (~$650)
- Pivot Pegz (worth twice the price I paid - one you've had them, there's no going back)
- RalleMoto steering damper (~$600)
- SW-Motech bar risers
- AltRider crash bars (~ $600)
- AltRider stainless steel headlight guard and new Lexan polycarbonate headlight guard as a spare (the pair was ~$300)
- Excel superlaced front tubeless wheel from Woody's Wheel Works with Michelin Anakee 2 front tire (about 30% remaining)
- Spare front TKC tire (50%) and brand new Michelin Anakee 3 tire
- Second BMW rear rim with TKC 80 tire at about 50%
- Powerlet plug installed in the back
- Reusable K&N air filter
- Vibranators (handlebar inserts to reduce vibration)
- Some expensive parts that marking installing the seat easier
- Pazzo clutch and brake levers (OEM levers included as spares)
- Twisted Throttle PowerHub (rebranded FuzeBlock)
- Custom protection plates for soft bags (made by TwinHeadlightErnie)
I want to keep the panniers, but will add them for $1,000 if the buyer wants them:
- Touratech 38L/45L annodized "Special Edition" Panniers ($1,900!!!) - Touratech Canada web link
And I'm sure I'm missing some items. The panniers are like new as I've rarely used them (pretty much grocery trips only). I bought some Wolfman Expedition dry bags for the Roaming Rally off-road event and found them more convenient. I actually had some custom plates made by an enterprising man on the the ADV forum that mount on the Touratech pannier racks to separate the Wolfman bags from the head of the exhaust and the crap thrown off the rear wheel.
The seat is a custom Rick Mayer saddle. Both the saddle and the pillion seat are leather-covered.
I'm the original owner and the bike has been pampered throughout its ownership. Dino oil was used for the first 8,000 or so kms as recommended for break-in and has been running on synthetic oil ever since. I was preparing the bike for air transport so the final drive oil has just been changed (for the second time since new) and will get new gear and motor oil on completion of the sale. Since switching to synthetic oil I've always put a generous helping of Tungsten Disulphide (WS2) in the oils to assist in lubrication.
The only material damage is a dent in the header pipe by the equalizer pipe. I used the freezing water trick to indent the pipe some, but it is still noticeably dented. It is not performance effecting so I ride with it. I will be including the original exhaust and muffler so if the dent bothers the buyer, he/she can put on the original header. The bash plate has had the dent hammered out.
I've spent well over $30,000 on this motorcycle on the premise that I would keep it for over a decade and ride it around the world. Unfortunately relocation is forcing me to sell.
Excluded in the sale are the Doubletake mirrors and Skene taillight controller as I will be taking these for my next bike. I will also take the Denali D2 lights as well if the buyer wants to reduce the price a bit.
Here are some pics. I haven't taken any specifically for this listing - these are all from my library.
Pictures of bike with panniers:
Pic of SW-Motech bar risers and Ralle Moto steering damper:
Pictures of bike showing custom seat and Powerlet plug:
Picture of the tubeless Excel wheel from Woody's Wheel Works:
Picture showing custom protection plates for soft saddlebags:
Picture of the Twisted Throttle PowerHub:
Picture of the damaged header - the dent has been reduced considerably using the freezing water trick:
Current: 2012 R1200GS
Past: 2009 Moto Guzzi Stelvio, 1979 Suzuki GS750L, XR350R, DT125, CT70
Dyno testing of a PC-V + Full Akropovic system on an R1200GS
bigbadandugly screwed with this post Yesterday at 07:34 AM
|07-19-2014, 08:53 AM||#29|
Trade Parts for Beer
Joined: Aug 2008
Location: Tronna area, Ontario Canada
Heidenau K60 Scout 110/80B19
Heidenau K60 Scout 110/80B19 front tire. Shown HERE.
Date code 1012 and has 6.5mm tread in the centre. Used maybe 3K kms. Fits F650GS and others.
$75, local pickup preferred, KW area or TO.
Now with only 1 Triple Black.
|07-19-2014, 09:36 AM||#30|
Joined: Aug 2007
Hepco Becker rack for 650 GS and Dakar.
Hepco Becker side cases rack for 650 GS and Dakar.
2 sides case VARIO for BMW 1200 GS, it was on 2005 but fit other year, juste one esthetique ding on the left cover.
BMW R1150 GS ADV 2002
KTM 530 EXC RED-BULL 2010
GASGAS 250 EC RACING 2012
MONTESA COTA 315 2001
PARTI QUÉBECOIS ALL THE WAY
|Thread Tools||Search this Thread|