Center stand skid-plate, r1150gs Adv - Page 31

Airbornexts912 · 02-24-2010, 11:43 AM

Can you give me a update or a tracking #?

Mark Whitcomb
Atomic Reoair

tylerjwhite · 02-24-2010, 10:04 PM

I got the package today and will be installing it hopefully tomorrow and will post the results. Looks like a solid hookup.

Thanks

Tyler

tylerjwhite · 02-25-2010, 10:50 AM

Pictures... Everyone likes pictures...

Got my new bike rock retardant gear in the mail yesterday. Put it in on today.

The oil cooler armor plate in the front once I got everything taken apart snapped in and holds solid. I was impressed at how well it fits and how it doesn't move at all. It did take quite a while to pull all the screws off of the front plastic fender to get into the area where it needed to be installed. I had to remove my light armor bar and go in from the front while pushing the fender down towards the tire. But once all the screws were out and I could actually get to that part of the bike it went in and came back together in a matter of minutes. I would highly suggest both of these for your bike if you have a GS like mine.

The center kick stand went on in about 3 minutes and seems pretty solid. I am glad I got it and didn't have to sell a body part to pay for it. Thanks

Very happy with the gear.

Thanks

UncleHowie · 02-25-2010, 07:54 PM

I got my oil cooler guard, and it's beautiful!

It's light, strong, and the black powder coating is flawless.

Price was right, and I got to support an inmate here. Win/win!

tylerjwhite · 02-25-2010, 08:44 PM

Do you guys sell or know anyone that sells the larger foot pegs for a 2001 1150 GS?

Thanks

Ty

g r a n t · 03-24-2010, 05:52 PM

best wishes for your procedure and recovery.

s1marks · 05-03-2010, 09:47 PM

Rick,

My package arrived form Rick on Saturday and I had the Mudguard and skid plate fitted within the hour. Took them out for about 100 miles of dirt and gravel on Sunday (OK...mainly gravel) but by the time I got back Sunday night the tire hugger was caked in mud the underside of the new mudguard caked, the yellow bag I carry on the back was still 'almost' spotless. Mudguard does it's job well and for $15 is a great farkle, made very (VERY) well and fitted no problems. The mudguard looks even cooler with the stock panniers on, but I try not to ride with them on the logging roads unless I need them.

Great skid plate too, great price, well happy. Thanks Rick.

S1

UncleHowie · 05-06-2010, 08:32 AM

Quote:

Originally Posted by kildala2000

This item really works well to provent mud from spaying your rear.

Asking $20.00 + postage *SALE* $15.00 + postage

Pm me with details if your interested.
Rick

Rick- I'll take this mud guard, if it's still available. PM incoming...

UncleHowie · 05-24-2010, 08:24 PM

Quote:

Originally Posted by kildala2000

2 Only) Rear mud guard, powder coated Black and will fit any GS 1150, 1200.
This item really works well to provent mud from spaying your rear.

Asking $20.00 + postage

Rick-

Please put me down for one of the rear mud guards.

I'll PM with my details.

Thanks, -UncleHowie

mitch · 05-26-2010, 08:14 AM

Quote:

Originally Posted by tylerjwhite

Do you guys sell or know anyone that sells the larger foot pegs for a 2001 1150 GS?

Thanks

Ty

I love my Fastway pegs, I got mine off Ricky, but I am sure you will have no trouble finding someone to sell you some.

UncleHowie · 06-01-2010, 03:45 PM

Rick-

The mud guard showed up.

It looks great, as per my expectations based on past purchases...

(none) · 06-17-2010, 04:14 PM

send you a PM on the 1150gs skid plate.

(none) · 06-29-2010, 01:29 PM

Got my skid plate yesterday for the GS. Took maybe 15 minutes to put on. Looks great. Thanks!

gonzo2k · 07-15-2010, 08:17 AM

I want the standard R1150 GS center stand skidplate for a friend, Rick
Put me in the queue for an oil cooler guard, as well

Sent a pm,
Rick

gonzo2k · 07-15-2010, 01:45 PM

My apologies for jumping the gun on the skid plate, Rick
Seems like my friend's not ready with cash in hand for this to happen immediately... someone should jump on this reduced price plate for their GS.

I'll be in touch... next time with wires uncrossed!

02-24-2010, 11:43 AM	#451
Airbornexts912 Adventurer Joined: Oct 2008 Oddometer: 65	Rick Can you give me a update or a tracking #? Mark Whitcomb Atomic Reoair

02-24-2010, 10:04 PM	#452
tylerjwhite Wandering Mtn Goat Joined: Sep 2009 Location: Orem, Utah Oddometer: 875	Hey I got the package today and will be installing it hopefully tomorrow and will post the results. Looks like a solid hookup. Thanks Tyler __________________ ‎"We shall not cease from exploration, And the end of all our exploring, Will be to arrive where we started, And know the place for the first time." Family Youth Yoga and Future Farmers

02-25-2010, 10:50 AM	#453
tylerjwhite Wandering Mtn Goat Joined: Sep 2009 Location: Orem, Utah Oddometer: 875	Got it Pictures... Everyone likes pictures... Got my new bike rock retardant gear in the mail yesterday. Put it in on today. The oil cooler armor plate in the front once I got everything taken apart snapped in and holds solid. I was impressed at how well it fits and how it doesn't move at all. It did take quite a while to pull all the screws off of the front plastic fender to get into the area where it needed to be installed. I had to remove my light armor bar and go in from the front while pushing the fender down towards the tire. But once all the screws were out and I could actually get to that part of the bike it went in and came back together in a matter of minutes. I would highly suggest both of these for your bike if you have a GS like mine. The center kick stand went on in about 3 minutes and seems pretty solid. I am glad I got it and didn't have to sell a body part to pay for it. Thanks Very happy with the gear. Thanks __________________ ‎"We shall not cease from exploration, And the end of all our exploring, Will be to arrive where we started, And know the place for the first time." Family Youth Yoga and Future Farmers

02-25-2010, 07:54 PM	#454
UncleHowie Dances with Buffalo Joined: Feb 2008 Location: Doghouse Oddometer: 407	I love the oil cooler guard! I got my oil cooler guard, and it's beautiful! It's light, strong, and the black powder coating is flawless. Price was right, and I got to support an inmate here. Win/win! __________________ -Uncle Howie: Landed Gentry, Perpetual n00b

02-25-2010, 08:44 PM	#455
tylerjwhite Wandering Mtn Goat Joined: Sep 2009 Location: Orem, Utah Oddometer: 875	Hiu Do you guys sell or know anyone that sells the larger foot pegs for a 2001 1150 GS? Thanks Ty __________________ ‎"We shall not cease from exploration, And the end of all our exploring, Will be to arrive where we started, And know the place for the first time." Family Youth Yoga and Future Farmers

03-24-2010, 05:52 PM	#456
g r a n t Studly Adventurer Joined: Feb 2006 Location: 0,0 Oddometer: 638	best wishes for your procedure and recovery. __________________ g r a n t

05-03-2010, 09:47 PM	#457
s1marks Mercedes Joined: Sep 2009 Location: Banks, Oregon. Oddometer: 513	Top notch! Rick, My package arrived form Rick on Saturday and I had the Mudguard and skid plate fitted within the hour. Took them out for about 100 miles of dirt and gravel on Sunday (OK...mainly gravel) but by the time I got back Sunday night the tire hugger was caked in mud the underside of the new mudguard caked, the yellow bag I carry on the back was still 'almost' spotless. Mudguard does it's job well and for $15 is a great farkle, made very (VERY) well and fitted no problems. The mudguard looks even cooler with the stock panniers on, but I try not to ride with them on the logging roads unless I need them. Great skid plate too, great price, well happy. Thanks Rick. S1

06-01-2010, 03:45 PM	#461
UncleHowie Dances with Buffalo Joined: Feb 2008 Location: Doghouse Oddometer: 407	Rick- The mud guard showed up. It looks great, as per my expectations based on past purchases... __________________ -Uncle Howie: Landed Gentry, Perpetual n00b

06-17-2010, 04:14 PM	#462
(none) poser Joined: Jan 2007 Location: Cincinnati, Ohio Oddometer: 2,482	send you a PM on the 1150gs skid plate. __________________ Current: 2001 R1150GS 1981 CB650 Custom 2011 Golf TDI - New tow rig

06-29-2010, 01:29 PM	#463
(none) poser Joined: Jan 2007 Location: Cincinnati, Ohio Oddometer: 2,482	Got my skid plate yesterday for the GS. Took maybe 15 minutes to put on. Looks great. Thanks! __________________ Current: 2001 R1150GS 1981 CB650 Custom 2011 Golf TDI - New tow rig

07-15-2010, 08:17 AM	#464
gonzo2k Adliberator Joined: May 2007 Location: Belford NJ Oddometer: 286	I want the standard R1150 GS center stand skidplate for a friend, Rick Put me in the queue for an oil cooler guard, as well Sent a pm, Rick __________________ RIP Alex... thanks for the avatar! Smugmug referral code: b39gXpEl6klcs

07-15-2010, 01:45 PM	#465
gonzo2k Adliberator Joined: May 2007 Location: Belford NJ Oddometer: 286	My apologies for jumping the gun on the skid plate, Rick Seems like my friend's not ready with cash in hand for this to happen immediately... someone should jump on this reduced price plate for their GS. I'll be in touch... next time with wires uncrossed! __________________ RIP Alex... thanks for the avatar! Smugmug referral code: b39gXpEl6klcs

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode