Center stand skid-plate, r1150gs Adv - Page 33

RTinNC · 02-13-2011, 09:16 AM

Quote:

Originally Posted by Fighter

Just received a master cylinder cover for my 1150 ADV.
Can't say enough about the service given by Rick.
The part was well designed and the price was more than reasonable.
Rick insisted that I send no money until the part landed at my door and I was able to check the fit.

I normally can't leave things alone and in this case I decided to cheese-hole the plate. Please note that the holes in the next picture were made by me and not something that Rick does. Thanks for a great product Rick. Fite

Part as received from Kildala

Are these still available? Did not see them on the web site?

Ron from BC · 02-25-2011, 07:20 AM

I have several of Rick's protection farkles and can attest to their functionality and his customer service.

The one I notice the most is the front engine cover, I remove all the stuff every winter to change any fasteners and repaint. That cover has more and more rock hits each time and I can only imagine what the alternator/engine cover would look like without it.

I called him a couple of years ago to find out where I could get a replacement fastener and where to go (so to speak...

) and if I didn't have access to the store he would send me some immediately.

Support is top knotch!

No affiliation to Kildala, just a satisfied repeat customer!

Mr Methane · 04-15-2011, 10:58 PM

Rick,

Have PM'd you in relation to a few items.

Cheers,

MM

BobbySands · 05-30-2011, 01:53 PM

I'll take the rear mud guard for the 1150 GS and the master cylinder cover for the 1150 GS, too.

PM sent.

I'm also looking for a front mud shield for the 1150 GS, I'll check your link.

CalGSer · 06-01-2011, 12:24 PM

Rick, I'll take the 1150gs center stand plate. Will PM you.
Thanks.

captsam54 · 09-28-2011, 09:27 AM

Got my rear tool box plate from Rick the other day and also the Fat Foot the price was great...!!! Got the rack to upload, but not the Fat Foot....

NavyDiveDoc · 10-28-2011, 03:57 AM

Got my MC guard and rear rack extension yesterday. Quality was outstanding as usual, and the service was great. Thanks Rick

captsam54 · 10-29-2011, 07:44 AM

Rick.. LOL. of course you know I want the rear mud guard, and the master cylinder guard.. I have everything else you make.. Do you have any pic's of those mounted on the bike..? (R1150 GSA)

Shoot me an email if you do.. (captsam@samwilson.com) thx...

Quote:

Originally Posted by kildala2000

PLACE YOUR ORDERS*

I've had a few PM's for the 1150 GS & ADV model Oil coolers. Due to the low volume of sales I have not made more.
I will consider a run of (10) Oil cooler guards if anyone is interested. Please send me a PM with your address and I'll make a list to purchase when ready.

1 Only) R1150 GS ADV center stand skid plate and front cover set, clear finish and comes with all hardware & screws. Ready to mount
Asking $50.00 + postage *SALE PRICE*

1 ONLY) R1100GS & R1150GS ( non Adv ) Center stand skid plate, clear finish, comes with hardware and instructions. Asking $50.00 + postage *SALE* $35.00 + postage

1 Only) Rear mud guard, powder coated Black and will fit any GS 1150, 1200.
This item really works well to provent mud from spaying your rear.

Asking $20.00 + postage

1 Only *BLACK*) 1150 GS or ADV master cyl gaurd. Asking $35.00 + postage.

1) Fuse Box holder. Asking $35.00 + postage
Pictures to follow.

BHumW · 11-25-2011, 06:28 AM

Rick,

Are you planning on making anything for the Yamaha Super Tenere?

I have one of your skid plates on my 1150 GSA (we crossed paths in Hyder once) but after 4 final drive bearing and now a broken cam chain slider in 40K miles, the beemers has gotten too expensive and unreliable to be fun.

Thanks.

mcstark · 02-05-2012, 07:49 AM

Anyone have pics of the mudguard installed on an 1150?

bbqBiker · 03-11-2012, 11:15 PM

Quote:

Originally Posted by mcstark

Anyone have pics of the mudguard installed on an 1150?

See page 26 of this thread.

bbqBiker · 03-20-2012, 01:33 PM

I PPd you, thanks!

Jazz62 · 03-26-2012, 02:17 PM

Just received the centerstand skid plate for my R1150GS

Very nice piece as others have said. If the mudguards ever become available again you can put me down for one.

Thanks,
Ron
Chicago

bbqBiker · 03-26-2012, 02:51 PM

Received (quickly).
Installed (easily).
Impressed (very).
Thanks!

Quote:

Originally Posted by kildala2000

Thanks bbqBiker.
Ride safe,
Rick

mcstark · 05-08-2012, 04:47 AM

Rick - Do you still have the centerstand skidplate and mudguard extension for the 1150GS?

02-25-2011, 07:20 AM	#482
Ron from BC Beastly Adventurer Joined: Jun 2008 Location: Vancouver Island Oddometer: 1,093	+1 on 1150GSA Parts I have several of Rick's protection farkles and can attest to their functionality and his customer service. The one I notice the most is the front engine cover, I remove all the stuff every winter to change any fasteners and repaint. That cover has more and more rock hits each time and I can only imagine what the alternator/engine cover would look like without it. I called him a couple of years ago to find out where I could get a replacement fastener and where to go (so to speak...) and if I didn't have access to the store he would send me some immediately. Support is top knotch! No affiliation to Kildala, just a satisfied repeat customer! __________________ '64 BMW R50/2 - "Gone but not forgotten" '76 BMW R90/6 '02 BMW R1150 GSA Ron from BC screwed with this post 03-08-2011 at 07:27 PM

04-15-2011, 10:58 PM	#483
Mr Methane Bundy anyone? Joined: Feb 2011 Location: Melbourne Oddometer: 31	Purchases Rick, Have PM'd you in relation to a few items. Cheers, MM __________________ He with the most toys wins...

05-30-2011, 01:53 PM	#484
BobbySands JockeyfullofBourbon Joined: Jan 2006 Location: Your man of The Da Vinci Code. Oddometer: 5,650	I'll take the rear mud guard for the 1150 GS and the master cylinder cover for the 1150 GS, too. PM sent. I'm also looking for a front mud shield for the 1150 GS, I'll check your link. __________________ "So what makes this protest different is that you're set to die, Bobby?" --May well come to that. "You start a hunger strike to protest for what you believe in. You don't start already determined to die or am I missing somethin' here?" -- It's in their hands. Our message is clear. They're seeing our determination.

06-01-2011, 12:24 PM	#485
CalGSer Robust Adventurer Joined: Mar 2007 Location: Left Coast Oddometer: 68	Rick, I'll take the 1150gs center stand plate. Will PM you. Thanks. __________________ 2007 G650 X Challenge - work in progress 2001 1150GS You can't always get what you want, but if you try sometime, you just might find, (that) you'll get what you need. Ancient British philosopher

09-28-2011, 09:27 AM	#486
captsam54 Ready to Ride..!! Joined: May 2011 Location: Naples, Fla. Oddometer: 204	Love my stuff from rick Got my rear tool box plate from Rick the other day and also the Fat Foot the price was great...!!! Got the rack to upload, but not the Fat Foot.... Attached Images

10-28-2011, 03:57 AM	#487
NavyDiveDoc Gnarly Adventurer Joined: Aug 2008 Location: Tidewater, Virginia Oddometer: 131	Got 'em Got my MC guard and rear rack extension yesterday. Quality was outstanding as usual, and the service was great. Thanks Rick __________________ Navy Dive Doc Back to Diving Again, EOD GRU 2 Chesapeake, VA 2011 R1200RT 2000 R1100S

11-25-2011, 06:28 AM	#489
BHumW so many roads... Joined: Jul 2003 Location: Duluth, MN Oddometer: 132	Tenere bits? Rick, Are you planning on making anything for the Yamaha Super Tenere? I have one of your skid plates on my 1150 GSA (we crossed paths in Hyder once) but after 4 final drive bearing and now a broken cam chain slider in 40K miles, the beemers has gotten too expensive and unreliable to be fun. Thanks.

02-05-2012, 07:49 AM	#490
mcstark Oilhead convert Joined: Sep 2008 Location: Bflo, NY Oddometer: 930	Anyone have pics of the mudguard installed on an 1150? __________________ Regards, Mark 2003 BMW R1150GS

03-20-2012, 01:33 PM	#492
bbqBiker Adventurer Joined: Dec 2007 Location: Tennessee Oddometer: 35	Pp I PPd you, thanks!

03-26-2012, 02:17 PM	#493
Jazz62 Studly Adventurer Joined: Oct 2009 Location: Midwest Oddometer: 633	Just received the centerstand skid plate for my R1150GS Very nice piece as others have said. If the mudguards ever become available again you can put me down for one. Thanks, Ron Chicago

05-08-2012, 04:47 AM	#495
mcstark Oilhead convert Joined: Sep 2008 Location: Bflo, NY Oddometer: 930	Rick - Do you still have the centerstand skidplate and mudguard extension for the 1150GS? __________________ Regards, Mark 2003 BMW R1150GS

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode