Yamaha XT1200Z SuperTénéré owners: Show Us Your Bikes!

[outactrl]

[Goldie05]

A few mods on my bike, getting it ready for my trip to Whitehorse

Utility tube



Set of lights



My new Eastern Beaver fuse box



All wired and ready to go

[GrahamD]

Looks pro.

[WVMTS]

Originally Posted by advD

WVMTS,

Do it!

You'll love the S10. I have the OEM top case, side cases and wind deflectors. Yes, they you can get a nice discount on the accessories if you purchase them with the bike.

One key is nice, as is a 3 second removal and install time with the OEM cases.

Thanks advD. I posted this in the wrong thread. Will be crunching numbers and hope to be an owner soon.

[bahill]

Originally Posted by Goldie05

Got any information to share about your handle bar mounted outlet/switch panel???

Who makes it, etc.?


.

[Goldie05]

Originally Posted by bahill

Got any information to share about your handle bar mounted outlet/switch panel???

Who makes it, etc.?


.

Sure, Highway Dirtbikes makes the top clamp piece, check here "Highway dirtbikes"

The switches came from them too and the plugs I got somewhere else, all the wiring done by me

[bahill]

Originally Posted by Goldie05

Sure, Highway Dirtbikes makes the top clamp piece, check here "Highway dirtbikes"

The switches came from them too and the plugs I got somewhere else, all the wiring done by me

Thanks !!!


.

[combo]

Originally Posted by Goldie05

A few mods on my bike, getting it ready for my trip to Whitehorse

Utility tube



Set of lights



My new Eastern Beaver fuse box



All wired and ready to go

Wow! Looks clean. well laid out.
What does all those switches, buttons and gadgets do?
Do you have a take off check list?

[Goldie05]

Originally Posted by combo

Wow! Looks clean. well laid out.
What does all those switches, buttons and gadgets do?
Do you have a take off check list?

Yea, I think I will need one

Okay, I will start from left to right

1st black switch turns power on or off for the plug on the left which is always powered (wired through the fuse box)

2nd black switch turns power on or off for the plug on the right which is ignition powered through the relay below the fuse box to the right (it's mounted at a 45 degree angle, see it in the previous photo)

The two green LED's are ON when the plugs are powered

3rd switch (red) powers my accessory lights and the red LED is on when powered (obviously )

4th switch (red) powers my radar detector, in case I want to switch it off after I'm stopped by a cop

The GPS is always powered since I might want to use it while the bike is not running

[EJV]

Originally Posted by pluric

Maybe, but it is sure going to be a tight fit. No way my filter socket can be used.
Channel locks or filter strap to get it off and tighten.
Let us know how it goes for you Goldie05. I'm not due for a while longer.

It is easy to remove the Alt Rider Skid Plate. No wrenches needed now.

Oil changes are Easy and Clean.


See:

Captured Nuts.

[Goldie05]

Originally Posted by EJV

It is easy to remove the Alt Rider Skid Plate. No wrenches needed now.

Oil changes are Easy and Clean.


See:

Captured Nuts.

I like it, where did you get those nuts :)

That didn't sound right

Sent from my amazing Samsung SII :-)

[EJV]

Originally Posted by Goldie05

I like it, where did you get those nuts :)

That didn't sound right

Sent from my amazing Samsung SII :-)

lol!

I got "5/16-25 Self-Locking Nut Plate, Floating" (And rivets 1/8 countersunk 1/8-1/4) from www.pegasusautoracing.com

The Bolts "socket flat head, stainless steel 18-8, 5/16" from www.boltdepot.com


I went to SAE from Metric because I could not find "floating" metric nut plates. No biggie. The bolts are the same "rating" as the ones supplied with the skid plate.

I "drilled out" the "little bracket up front" to use the larger bolts (someone forgot to order the smaller hardware. Said Fcuk it, and made everything one size).



Works perfect!!

EJ

[mcperformance]

[QUOTE=EJV;18847679]lol!

I got "5/16-25 Self-Locking Nut Plate, Floating" (And rivets 1/8 countersunk 1/8-1/4) from www.pegasusautoracing.com

The Bolts "socket flat head, stainless steel 18-8, 5/16" from www.boltdepot.com


I went to SAE from Metric because I could not find "floating" metric nut plates. No biggie. The bolts are the same "rating" as the ones supplied with the skid plate.

I "drilled out" the "little bracket up front" to use the larger bolts (someone forgot to order the smaller hardware. Said Fcuk it, and made everything one size).



Works perfect!

EJ[/QUOTE
Twin Mufflers
Hi all,
Some very nice photos of some magnificant scernery.
As this is a site for people to show off there bikes, thought I'd show you all my new twin set up.
Have done a few mods PCV, K & N Filter & our mufflers.
So far have got a 12-15% increase over stock.
Here also is the video link, http://youtu.be/FZzqqhXbVj8
Chappy.






__________________
Visit my website for exhaust and mufflers
http://www.mcperformance.com.au

[Flydream]

mcp, looks nice and sounds better

[bahill]