Brake rotors for 2007 990 w/ ABS

[ProblemChild]

One of my front rotors is slightly warped. Not a huge deal at the moment but I will eventually be looking for a replacement option besides the OEM for an '07 990 Adventure (ABS). Ran across this post and wondered. Anyone know of what options are available?

Originally Posted by Salzig

I fitted new brake rotors to my off-road front wheel (and new brake pads too)

[75monza]

I know that you can use Galfer's or Braking's:

http://www.ktmtwins.com/ktm-950-990-...ont-wave-rotor

http://www.ktmtwins.com/ktm-950-990-...ont-wave-rotor

Your picture looks like the Braking ones.

[ProblemChild]

Originally Posted by 75monza

I know that you can use Galfer's or Braking's:

http://www.ktmtwins.com/ktm-950-990-...ont-wave-rotor

http://www.ktmtwins.com/ktm-950-990-...ont-wave-rotor

Your picture looks like the Braking ones.

Interesting. Now that you've made me look again as I had checked their site before, it appears the Galfers will not work as it specifically says "will not work with ABS bikes" at the bottom. The Braking ones say that too, BUT, offer a left and right and appear to be the ones in the photo. I wonder if that's a typo? Luckily, KTMtwins is down the street. Next time I pop by I'll ask them about that, too.

[gefr]

Cheers.

[dendrophobe]

Originally Posted by ProblemChild

Interesting. Now that you've made me look again as I had checked their site before, it appears the Galfers will not work as it specifically says "will not work with ABS bikes" at the bottom. The Braking ones say that too, BUT, offer a left and right and appear to be the ones in the photo. I wonder if that's a typo? Luckily, KTMtwins is down the street. Next time I pop by I'll ask them about that, too.

Any word on this? I'd love to have Galfer brakes, but I have the ABS...

[Peanuts]

I recon Salzig has it sorted

[WelshLAMB]

Just don't forget to still use the longer dic retaining bolts on the ABS ring side.
Happy trails!

[Duckhams]

Any one have problems with floating Disc brakes from BRAKING.
Mine is rubbing on my calipers for the front. Any suggestiong or any one came accros the same problem for 950 ADV?

[Peanuts]

On the EXC I had to grind the caliper bracket a little so it cleared the bobbins on the Braking disc, might be same on the Adv?

[Peanuts]

Originally Posted by WelshLAMB

Just don't forget to still use the longer dic retaining bolts on the ABS ring side.
Happy trails!

Good point. Stock discs have a recess for the screw head, this needs to be considered when adapting Braking discs onto the Adv.

[Duckhams]

Originally Posted by Peanuts

On the EXC I had to grind the caliper bracket a little so it cleared the bobbins on the Braking disc, might be same on the Adv?

Mine look like this with stock but with floating disc it get abit worst. What should I do????

[Peanuts]

Looks like its only rubbing on one brake. Could you have a damaged wheel spacer on that side ending up with the wheel set too far one way?

[KTMSER]

EBC is making one for the 950/990. They have also updated the rivets to square ones.
I went this route on the SE after having the rivets loosen up on four stock ones..

[slowinfastout]

Right now only KTM factory rotors work with ABS, though you can use many other brands if you re willing to give up your ABS (sensor ring won't fit on aftermarket rotors)

[KTMSER]

Originally Posted by slowinfastout

Right now only KTM factory rotors work with ABS, though you can use many other brands if you re willing to give up your ABS (sensor ring won't fit on aftermarket rotors)

Incorrect sir, EBC has that issue sorted..

Take a closer look at that EBC rotor it is recessed for the ABS ring...