KTM 950/990 rotopax mounting plate

[beergut]

With lots of discussion and development, finally, a mounting option for Rotopax containers has been developed for the stock KTM 950/990 Adventure pannier racks.

This is the rack system these are designed for


Mounting plates are built using 3/16" 5052-H32 aluminum, in raw finish.



Bolts have been recessed as the photo above shows



Mounting design has been fully tested in Moab with full fuel containers








Can be used with dry bags


Mounting hardware
*a note on the mounting hardware*

Mounting hardware is quality stainless steel used with a locking nut. (wont rust) I believe this is a superior design ready for abuse.

It seems there is a slight difference between the 990/950 H&B pannier rack. The top bolt touches the rear fairing slightly on a 950. To me this is not an issue, to others it might. A smaller bolt would solve the issue.. I will leave that to the discretion of the buyer.


Current inventory ready to ship


Pricing

US freight:
$53/ea delivered via USPS
$93/pair delivered via USPS

International shipping:
$81/ea delivered flat rate USPS
$121/pair delivered flat rate USPS

Please contact me for my paypal address.
I will not accept money if I do not have the plates ready to ship.

[bikyto]

Good job, nicely done!
I'll be in touch.

[beergut]

A pair of rotopax mounting plates are on the way to Georgia!

bikyto, I will be waiting on your PM for payment arrangement!

[beergut]

Its almost the weekend

[beergut]

I have had several people ask me if these will fit Touratech type pannier racks. To be clear, this is the style of rack they have been tested with. I have learned several inmates run Touratech/KTM branded aluminum panniers on this rack. It was my initial understanding that these are for H&B/Gobi panniers only.

If you feel they will work with a different rack, I have no problem working with you on 'trial and error' type purchases.

[beergut]

When you are fueling up before you head out this weekend, think of how much more fun you could have with a few extra gallons of fuel!!!


Sent from my iPad using Tapatalk

[beergut]

A plate is making its way to Washington!

[beergut]

These can be used for many other things as well!

[John_L]

considering buying some as I'm running out of time on my mounts and haven't figured them out. Question though, how wide is the back end with the pax and the Wolfmans mounted?

Nice product.

[mechanical]

With the bags fully packed the width is 46" overall.

[John_L]

Thanks

[beergut]

Thanks Mechanical.

Inventory is starting to thin out. Another production run will likely be a 2 week wait.

I can usually ship the same day money is received.


By the way, another pair heading to Canada!!!


Sent from my iPad using Tapatalk

[beergut]

For all of you planning trips this season, don't forget to plan fuel and water!

Rotopax also makes a fantastic tool container that can be used with this mounting system!

[beergut]

These would work great with a Giantloop as well!!!

Stay tuned for some new products.

These mounting plates will not change in design.

[beergut]

1 pair and 1 single plate are all that remain.