ADVrider

Go Back   ADVrider > Bikes > Beasts
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
Old 04-04-2012, 09:37 AM   #1
Wasp OP
Supa10 pilot
 
Joined: May 2010
Location: Western Australia
Oddometer: 1,062
The "LONG TERM" WaspWorks Super Tenere, in detail and the evolution - Part 2

Yo Folks.....
After 21 months, 142 pages, 615,805 hits, and 2119 posts (and having been relegated to the "Vendors forum") I thought it was about time I started a fresh log of where I am at now, and of future changes and rides/reports I plan on doing with my much loved and well personalized Yamaha XT1200Z Super Tenere.

I will keep checking the old thread in the Vendors section for you guys that have questions (easier just to send me a p.m), but my intention is (hopefully) to keep this new informative thread here in "Beasts" where it belongs and where I can have my say and brag about MY bike and MY adventure rides just like everyone else.

If I design new stuff "FOR ME" it's obviously best I put that in the old thread in vendors as, inevitably, someone will ask about it and if it can be bought and then the merry-go-round will start again.

Anyway - As always, I will keep posting up heaps of photo's and video's of where I am at and we will see if this one grows as big as the last.

Greg.
__________________
The original WaspWorks S10 detail & evolution thread:
http://www.advrider.com/forums/showthread.php?t=595933
The NEW "Long Term" WaspWorks S10 detail & evolution thread:
http://www.advrider.com/forums/showthread.php?t=778809
Wasp is offline   Reply With Quote
Old 04-04-2012, 09:44 AM   #2
Wasp OP
Supa10 pilot
 
Joined: May 2010
Location: Western Australia
Oddometer: 1,062
I polished my exhaust today - What a Pain in the ass....

I actually did this a few days ago but didn't want to put it in the old thread as it obviously is a general interest do-it-yourself type deal. So, here we go.

The current WASPmobile (2010 XT1200Z Super Tenere) is about 21mths old, and I decided it was about time the original headers had a spruce up.
Actually, the whole bike desperately needs a clean as it hasn't had one for a few rides now.. Very unlike me but i've been short on time.

I posted this pic in another thread (about the 21" front wheel install) and was totally disgusted by the condition of the pipes.


I got a quarter of the way into the job and reminded myself why I dont do this more often... What a frig'n pain. I like looking at shiney shit, but I am no longer fond of shining shit...



Anyway, the headers came up well and I even did the stainless port nuts and the cat converter.



Now if I can only remember to give the pipes a wipe every now and then they might stay clean for a while.

Next job is to give the whole bike a wash and shine...... One day

Greg.
__________________
The original WaspWorks S10 detail & evolution thread:
http://www.advrider.com/forums/showthread.php?t=595933
The NEW "Long Term" WaspWorks S10 detail & evolution thread:
http://www.advrider.com/forums/showthread.php?t=778809

Wasp screwed with this post 04-04-2012 at 10:25 AM
Wasp is offline   Reply With Quote
Old 04-04-2012, 09:46 AM   #3
Wasp OP
Supa10 pilot
 
Joined: May 2010
Location: Western Australia
Oddometer: 1,062
I ran the bike up on the stand tonight to get a bit of the gold tinge back...

Freshly polished as shown above:


After 10 minutes run up. Sporting its new gold tinge: (See the polished silver flange nut for comparison)


Very happy camper.

Greg.
__________________
The original WaspWorks S10 detail & evolution thread:
http://www.advrider.com/forums/showthread.php?t=595933
The NEW "Long Term" WaspWorks S10 detail & evolution thread:
http://www.advrider.com/forums/showthread.php?t=778809
Wasp is offline   Reply With Quote
Old 04-04-2012, 09:49 AM   #4
Wasp OP
Supa10 pilot
 
Joined: May 2010
Location: Western Australia
Oddometer: 1,062
Someone (on another forum) commented on my scratched up side panels.

Not a biggy to me.. They're not scratch's - That's "Adventure CRED"...
I originally had SW-Motech crash bars but decided it was 5 or 6 kg hanging off the front that I could do without.

I elected to remove the bars and see just how good the plastic OEM side protectors work.
Obviously they dont offer anywhere near the protection of tube steel crash bars, but you are also not encumbered with the extra girth and weight. That said, I think the plastic guards have done an admirable job as the bike has been down in the dirt and gravel quite a number of times on both sides.

My son took the bike for a quick ride during last week and bought it back with a broken right hand plastic protector.
Ya think this will buff out?


This part is affordably replaceable at $US31 - The bastards over here (Yamaha Australia) charge $89 for the same part

As I said above, the bike is in dire need of a clean and polish, and to be honest, most of this will polish out.


The scars above were from a 30>40ft slide down a muddy gravel road where the bike ended up front wheel high on an embankment laying in 6" of water
This is the only damage - Even the carbon muffler survived unscathed.

I'm actually waiting for someone to offer these up for sale:


As soon as they are available, i'm in there with bells on.. I will prolly end up getting the seat re-trimmed in alcantara as well.

Greg.
__________________
The original WaspWorks S10 detail & evolution thread:
http://www.advrider.com/forums/showthread.php?t=595933
The NEW "Long Term" WaspWorks S10 detail & evolution thread:
http://www.advrider.com/forums/showthread.php?t=778809
Wasp is offline   Reply With Quote
Old 04-04-2012, 10:05 AM   #5
Wasp OP
Supa10 pilot
 
Joined: May 2010
Location: Western Australia
Oddometer: 1,062
Finally attached the Ohlins shock canister PROPERLY

Ya....

After about six months of riding around with the rear shock canister (mounted in the same position but) zip tied to the frame rail with a rubber sleeve, I finally go onto making a saddle to clamp it properly.

Zip ties removed and waiting for the saddle install.


The saddle.
I quickly whipped this up a few days ago from some 40mm ply that I painted and cured in the oven.
I just so happened to have the correct (exactly) holesaws for both the frame cross member tube and the canister diameter.


Easiest to get at (tighten the stainless clamp) from under the tank.
The saddle shoulders onto the frame rail and the canister pulls up against it with a large hose clamp.


Quite a shade tree solution but it secures the canister very well in deed, and is up and out of site so no one would really know what it is made of.



I think it turned out really tidy.
Didn't cost a zack as I had the hose clamp laying in the junk box, and there is a shitload of 40mm ply that I salvaged from a casting mold manufacturer many years ago.



Very happy with the outcome...
Back to riding now.

Greg.
__________________
The original WaspWorks S10 detail & evolution thread:
http://www.advrider.com/forums/showthread.php?t=595933
The NEW "Long Term" WaspWorks S10 detail & evolution thread:
http://www.advrider.com/forums/showthread.php?t=778809
Wasp is offline   Reply With Quote
Old 04-04-2012, 10:07 AM   #6
Spencer54
Adventurer
 
Joined: Apr 2012
Oddometer: 40
I'm sorely tempted by the S10 - what kind of mileage do you have and has it been reliable?
They look like they can take it!
Spencer54 is offline   Reply With Quote
Old 04-04-2012, 10:12 AM   #7
Wasp OP
Supa10 pilot
 
Joined: May 2010
Location: Western Australia
Oddometer: 1,062
Side panels off and ready to lift the tank again...

I recon I could do this blind folded now.
I can confidently say that I must have had this bike pulled apart more than just about any Yamaha tech around the planet.



I do love working on it though.. Just love modifying and tinkering with shit.

Greg.
__________________
The original WaspWorks S10 detail & evolution thread:
http://www.advrider.com/forums/showthread.php?t=595933
The NEW "Long Term" WaspWorks S10 detail & evolution thread:
http://www.advrider.com/forums/showthread.php?t=778809
Wasp is offline   Reply With Quote
Old 04-04-2012, 10:24 AM   #8
Wasp OP
Supa10 pilot
 
Joined: May 2010
Location: Western Australia
Oddometer: 1,062
Quote:
Originally Posted by Spencer54 View Post
I'm sorely tempted by the S10 - what kind of mileage do you have and has it been reliable?
They look like they can take it!
I dont think I have ever stopped to workout/worry about the mileage Spencer.
On average I know that a 16lt top up (that's usually after the lights been on for a while) is about 300kms worth.
I do a lot of dirt riding as well so that would impact on the mileage a lot.

There are heaps of threads about the mpg and range of these bikes amongst threads here and on www.yamahasupertenere.com

Oh, and reliability... It's a Yamaha. I dont think I have read a thread yet about one stopping or breaking down in the field.
Some folks have crashed, bent rims, punctured sumps etc, but no breakdowns from my knowledge.

Greg.
__________________
The original WaspWorks S10 detail & evolution thread:
http://www.advrider.com/forums/showthread.php?t=595933
The NEW "Long Term" WaspWorks S10 detail & evolution thread:
http://www.advrider.com/forums/showthread.php?t=778809
Wasp is offline   Reply With Quote
Old 04-04-2012, 12:56 PM   #9
cpittmx
Adventurer
 
Joined: Dec 2011
Location: Northeastern Ohio
Oddometer: 63
What did you use to clean up pipes? Came out really nice.
cpittmx is offline   Reply With Quote
Old 04-04-2012, 03:12 PM   #10
Spencer54
Adventurer
 
Joined: Apr 2012
Oddometer: 40
Laugh

No I meant how many miles has the bike done!
I have to get the miles out of my bikes and currently the s10 is up there as a replacement if I can get a good deal.
Spencer54 is offline   Reply With Quote
Old 04-04-2012, 05:15 PM   #11
William42
Beastly Adventurer
 
William42's Avatar
 
Joined: Oct 2008
Location: Champaign, IL
Oddometer: 2,558
__________________
Mud is evil
William42 is offline   Reply With Quote
Old 04-04-2012, 06:35 PM   #12
Buckeye56
Batoutahelius
 
Buckeye56's Avatar
 
Joined: Jul 2010
Location: Ohio
Oddometer: 202
Greg,

Great idea! I have profited mightily from you knowledge and experience with the Super Tenere and am anxious to see what further developments you have in store for the "faithful"!
__________________
2012 Super Tenere

Trying is the first step towards failure.
Buckeye56 is offline   Reply With Quote
Old 04-04-2012, 08:42 PM   #13
GrahamD
Beastly Adventurer
 
GrahamD's Avatar
 
Joined: Oct 2009
Location: Blue Mnts Ozstralia
Oddometer: 5,238
Thanks Greg.

I have my own zort polishing routine, but I am beginning to think that a polished zorst pipe sort of cancels out all the "adv cred" you get from the scratches.

Hard call that one.
__________________
"It's better to ride a boring bike than push an interesting one" ... Canuman

"I just may as well admit that my other bikes are toast. I don't ride them. Plain and simple. I didn't want this. It wasn't the plan." - snakebitten
GrahamD is offline   Reply With Quote
Old 04-04-2012, 11:32 PM   #14
WARRIORPRINCEJJ
Not in the clique...
 
WARRIORPRINCEJJ's Avatar
 
Joined: Jun 2009
Location: South Central Texas
Oddometer: 9,723



.
__________________
I spent all my money on motorcycles, 4X4's, whiskey, and women...The rest I just wasted. (edited to fit/original phrase by "WIBO")

"There's a WEALTH of cool people and knowledge on ADV, there's also a decent sized pocket of douche bag assholes that think their ADV forum Post Count (Oddometer) is their badge at being experienced riders." goodcat8
WARRIORPRINCEJJ is offline   Reply With Quote
Old 04-05-2012, 01:09 AM   #15
hayfarmer
Gnarly Adventurer
 
Joined: Sep 2010
Location: Sunny Upper Manilla NSW Oz
Oddometer: 123
Glad to see you back in Beasts Greg ( where you belong ). I look forward to the continuing adventure.
hayfarmer is offline   Reply With Quote
Reply

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 07:46 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014