ADVrider

Go Back   ADVrider > Bikes > Orange Crush
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
Old 06-09-2012, 07:51 PM   #1
ktm950se OP
Banned
 
ktm950se's Avatar
 
Joined: Jan 2007
Location: Southern Maine
Oddometer: 1,385
New Air filter: Bikeair/ITG

Greetings,
Does anyone have experience with Bikeair/ITG's air filter?
ITG's website lists a filter (assembly?) for the KTM 950 Adventure, 950 Superenduro, and 950 Supermoto, as part #HMP-747.

ktm950se
ktm950se is offline   Reply With Quote
Old 06-10-2012, 08:01 AM   #2
ktm950se OP
Banned
 
ktm950se's Avatar
 
Joined: Jan 2007
Location: Southern Maine
Oddometer: 1,385
I'm guessing it'll look something like Mikael's ITG filter assembly, shown in his Ultra gravel-traveller. RC8Red Adv-S... thread:







ktm950se
ktm950se is offline   Reply With Quote
Old 06-11-2012, 09:39 AM   #3
ktm950se OP
Banned
 
ktm950se's Avatar
 
Joined: Jan 2007
Location: Southern Maine
Oddometer: 1,385
I just received word from ITG regarding this 'filter' and, alas, its just that and nothing more...

HMP-747 is a filter replacement only. It has no base plate. It replaces the standard filter and sits inside the stock air box of the Super Enduro.


ktm950se
ktm950se is offline   Reply With Quote
Old 06-12-2012, 04:58 PM   #4
bambadoo
n00b
 
Joined: Mar 2012
Oddometer: 5
I also use the one in the pictures above in my SMT. However I use the itg with 65mm internal height instead of 100mm as in the pictures. Works great..

It is called ITG Megaflow jc30 "sausage" filter.
http://itgairfilters.com/downloads/JC30.pdf

With corresponding baseplate.




bambadoo is offline   Reply With Quote
Old 06-13-2012, 03:33 AM   #5
ktm950se OP
Banned
 
ktm950se's Avatar
 
Joined: Jan 2007
Location: Southern Maine
Oddometer: 1,385
Greetings,
Can you explain your baseplate setup in more detail?
Did you have to drill holes in it for the carbs to protrude through?
What Fuel Injector Body-to-baseplate gaskets/O-rings did you use?
Did you encounter any other issues or problems setting this configuration up?

Thanks!

ktm950se
ktm950se is offline   Reply With Quote
Old 06-13-2012, 04:26 AM   #6
bambadoo
n00b
 
Joined: Mar 2012
Oddometer: 5
Not time right now but some work had to be done....



As you can see the baseplate (1mm thick) had to be cut out to fit. a 4mm plexi glass was glued to it. (to make it stiffer and so that the throttle (I have changed to RC8 throttles) fitted good.

69mm o rings was also fitted to make the seal between the throttlebodies and the baseplate.

EDIT - 69mm o rings.. Not 6.9mm

bambadoo screwed with this post 08-15-2012 at 01:35 AM
bambadoo is offline   Reply With Quote
Reply

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 11:14 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014