BUMOT Luggage system

BUMOT · 07-16-2012, 11:24 AM

I would like to introduce my project which I have started at about two years ago. My aim was to produce rack in which can be mounted tool box.
After many experiments and tests, here is the result:

The tool box is with 7 litter capacity.

Besides the convenience to have the tools always at hand, without the need to put external suitcases. There is also another advantage – you have bigger luggage capacity with smaller dimensions of the motor with mounted panniers.

For R1150GS the width of the motor with mounted panniers is as follows:

2 suitcases x 35 litters + 7 litters toolbox – 90 cm.

2 suitcases x 40 litters + 7 litters toolbox – 96 cm.

2 suitcases x 45 litters + 7 litters toolbox – 102 cm.

Regarding the panniers:

They are made of 2 mm aluminium sheets, welded and powder painted. The method we use to attach the bottom of the pannier to the body makes the bottom edge 4 mm thick.

The pannier is mount to the rack in 4 points, which helps more evenly distribution of the luggage load, and hence greater endurance of the panniers.

The lid is attached with two hinges and two toggle latches with a tensile strength of 400 kg.

Suitcases are dust and water impermeable.

The stand for the upper-case is made so that it can easily be used for Luggage rack.

We are currently developing a system for R1200GS.
More information you can find here: www.bumot.eu
If you have any question I am on your disposal.

danman · 07-17-2012, 12:26 PM

fantastic looking product. I am definitely interested in the toolbox. Can you ship to the US? And if so, how much/how long to ship via a 'normal' delivery (not a rush delivery)?

Do you think they would mount on the inner side of a 1200GS with Touratech panniers? Or an 800 GS with touratech panniers?

OK lemme know and good luck with your products.

BUMOT · 07-17-2012, 11:14 PM

Quote:

Originally Posted by danman

fantastic looking product. I am definitely interested in the toolbox. Can you ship to the US? And if so, how much/how long to ship via a 'normal' delivery (not a rush delivery)?

Do you think they would mount on the inner side of a 1200GS with Touratech panniers? Or an 800 GS with touratech panniers?

OK lemme know and good luck with your products.

Thank's, I'm glad you like it.
I can send to US and the prices are : approx 15$ -40 days delivery,approx 25$- 5days delivery.
They can't be mount on the Touratech side rack.Till the end of August I will have rack for R1200GS.

farcall · 09-17-2012, 11:05 PM

Your cases look quite good.

Are the hinges and lid latches stainless steel?

Shipping estimate for 35ltr and 45ltr alu-case to Australia please?

Dan Alexander · 09-18-2012, 05:13 AM

sailah · 09-18-2012, 08:48 AM

Looks great, and kudos for being a vendor with a conscience.

BUMOT · 09-18-2012, 11:45 AM

Thanks

Quote:

Originally Posted by farcall

Your cases look quite good.

Are the hinges and lid latches stainless steel?

Shipping estimate for 35ltr and 45ltr alu-case to Australia please?

The hinges are stainless steel.
The latches are mild steel / Zinc Passivated.
Airfreight shipment costs 133 euro. Delivery time aprox 2 weeks.
Freight by ship is 63 euro. Delivery time aprox 4-6 weeks.

farcall · 09-18-2012, 06:38 PM

Quote:

Originally Posted by bulgaras

Thanks

The hinges are stainless steel.
The latches are mild steel / Zinc Passivated.
Airfreight shipment costs 133 euro. Delivery time aprox 2 weeks.
Freight by ship is 63 euro. Delivery time aprox 4-6 weeks.

I can feel an order coming on

. Give me a few weeks to mull this over.

BUMOT · 10-18-2012, 09:50 PM

We already have system for BMW R1200GS/ADV.

BUMOT · 11-29-2012, 08:17 AM

We have got new product - mounting plate for the rack.(R1200GS/ADV,R1150GS/ADV)
You can mount from left and right side.

This plate will protects your bags from touching to the muffler.

You can use it like support for your rotopax canister or other product.
The rack is compatible with Wolfman expedition dry saddle bags and teton saddle bags.

BUMOT · 12-01-2012, 11:38 AM

I would like to inform you about our new distributors:
Exclusive U.S. & Canada - XPLORERMOTO,LLC www.xplorermoto.com
Spain - DS Bike Protection- www.dsbikeprotection.com

Ayrshire Bull · 12-30-2012, 10:31 PM

that is some seriously nice work Bulgaras -

- all the very best of luck for a really busy New Year!

steelman · 12-31-2012, 04:03 AM

I have a R1150GS,
Bulgaras , i like see a lateral picture with thís cases
It's for look the case and the passenger site...
Thanks

BUMOT · 12-31-2012, 06:00 AM

Thank you Ayrshire Bull.

steelman here is the picture.
www.dsbikeprotection.com is our distributor in Spain.

HAVE A SAFE AND HAPPY NEW YEAR!

johnny80s · 01-01-2013, 08:26 PM

Those look pretty cool. Options are always great.

07-16-2012, 11:24 AM	#1
BUMOT ^OP Adventurer Joined: Nov 2010 Location: Bulgaria Oddometer: 40	BUMOT Luggage system I would like to introduce my project which I have started at about two years ago. My aim was to produce rack in which can be mounted tool box. After many experiments and tests, here is the result: The tool box is with 7 litter capacity. Besides the convenience to have the tools always at hand, without the need to put external suitcases. There is also another advantage – you have bigger luggage capacity with smaller dimensions of the motor with mounted panniers. For R1150GS the width of the motor with mounted panniers is as follows: 2 suitcases x 35 litters + 7 litters toolbox – 90 cm. 2 suitcases x 40 litters + 7 litters toolbox – 96 cm. 2 suitcases x 45 litters + 7 litters toolbox – 102 cm. Regarding the panniers: They are made of 2 mm aluminium sheets, welded and powder painted. The method we use to attach the bottom of the pannier to the body makes the bottom edge 4 mm thick. The pannier is mount to the rack in 4 points, which helps more evenly distribution of the luggage load, and hence greater endurance of the panniers. The lid is attached with two hinges and two toggle latches with a tensile strength of 400 kg. Suitcases are dust and water impermeable. The stand for the upper-case is made so that it can easily be used for Luggage rack. We are currently developing a system for R1200GS. More information you can find here: www.bumot.eu If you have any question I am on your disposal.

09-17-2012, 11:05 PM	#4
farcall Bike-a-holic Joined: May 2008 Location: Western Australia Oddometer: 1,485	Questions Your cases look quite good. Are the hinges and lid latches stainless steel? Shipping estimate for 35ltr and 45ltr alu-case to Australia please? __________________ 01 Africa Twin RD07A 05 HP2 09 R1200GSA - for sale! 10 DR650

09-18-2012, 05:13 AM	#5
Dan Alexander Ride Far - Ride Fast Joined: Nov 2003 Location: Ottawa and Montreal Oddometer: 4,759	__________________ Beemers Past and Present: 74 R90S, 77 R100RS, 85 K100RS, 2x 87 K100RS, 96 R1100GS, 99 R1100S, 2002 R1150GS, 2005 F650 Dakar Plus the occasional Triumph, BSA, Yamaha, Honda, Suzuki and KTM but who's counting

09-18-2012, 08:48 AM	#6
sailah Lampin' it Joined: Aug 2005 Location: Turning expensive metal into scrap Oddometer: 4,169	Looks great, and kudos for being a vendor with a conscience. __________________ We're not out here to rough it. We're here to smooth it . Things are rough enough in town. Nessmuk

10-18-2012, 09:50 PM	#9
BUMOT ^OP Adventurer Joined: Nov 2010 Location: Bulgaria Oddometer: 40	R1200GS/ADV System We already have system for BMW R1200GS/ADV. __________________ WWW.BUMOT.EU

07-17-2012, 12:26 PM	#2
danman tumbling tumbleweed Joined: Jun 2006 Location: Texas / California Oddometer: 131	fantastic looking product. I am definitely interested in the toolbox. Can you ship to the US? And if so, how much/how long to ship via a 'normal' delivery (not a rush delivery)? Do you think they would mount on the inner side of a 1200GS with Touratech panniers? Or an 800 GS with touratech panniers? OK lemme know and good luck with your products.

11-29-2012, 08:17 AM	#10
BUMOT ^OP Adventurer Joined: Nov 2010 Location: Bulgaria Oddometer: 40	We have got new product - mounting plate for the rack.(R1200GS/ADV,R1150GS/ADV) You can mount from left and right side. This plate will protects your bags from touching to the muffler. You can use it like support for your rotopax canister or other product. The rack is compatible with Wolfman expedition dry saddle bags and teton saddle bags. __________________ WWW.BUMOT.EU

12-01-2012, 11:38 AM	#11
BUMOT ^OP Adventurer Joined: Nov 2010 Location: Bulgaria Oddometer: 40	New Distributors I would like to inform you about our new distributors: Exclusive U.S. & Canada - XPLORERMOTO,LLC www.xplorermoto.com Spain - DS Bike Protection- www.dsbikeprotection.com __________________ WWW.BUMOT.EU

12-30-2012, 10:31 PM	#12
Ayrshire Bull why the hell not? Joined: Nov 2002 Location: North Vancouver, B.C., CA-NA-DA Oddometer: 1,302	that is some seriously nice work Bulgaras - - all the very best of luck for a really busy New Year! __________________ "It's not what you look at that matters, it's what you see." - HDT

12-31-2012, 04:03 AM	#13
steelman Adventurer Joined: May 2009 Location: Reus (CATALONIA) Oddometer: 17	I have a R1150GS, Bulgaras , i like see a lateral picture with thís cases It's for look the case and the passenger site... Thanks

12-31-2012, 06:00 AM	#14
BUMOT ^OP Adventurer Joined: Nov 2010 Location: Bulgaria Oddometer: 40	Thank you Ayrshire Bull. steelman here is the picture. www.dsbikeprotection.com is our distributor in Spain. HAVE A SAFE AND HAPPY NEW YEAR! __________________ WWW.BUMOT.EU

01-01-2013, 08:26 PM	#15
johnny80s Adventurer Joined: Jan 2010 Oddometer: 64	Those look pretty cool. Options are always great.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode