Go Back   ADVrider > Bikes > Trials
User Name
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Thread Tools Search this Thread Display Modes
Old 05-04-2013, 06:21 PM   #1
nikj OP
Joined: Apr 2010
Oddometer: 4
Grimeca Brake Lever on a Montesa

This lever finally broke tonight
any idea on where to get a replacement or another one that will work with the existing Caliper
nikj is offline   Reply With Quote
Old 05-05-2013, 09:05 AM   #2
Gnarly Adventurer
Joined: Mar 2008
Location: Austin, TX
Oddometer: 435
Uh, the master cylinder is broke not the lever.
74 TY 80, 175 and 250 no longer at Brewtus's house
86 TLR200
95 Sportster 1200
13 Factory Beta 250
neilking is offline   Reply With Quote
Old 05-08-2013, 08:19 AM   #3
Slow Ride to Nowhere
mikeysduck's Avatar
Joined: Jan 2008
Location: Acton Ca.
Oddometer: 242
No doubt a Montesa dealer could find the parts you need.

Last I knew Storz Performance was selling Grimeca parts. The parts are not rare, I have Grimeca on my Norton. I was recently assured parts are out there.

Address: 239 S Olive St, Ventura, CA 93001
Phone:(805) 641-9540

Last time I looked, YEARS ago. Cycle Gear could get Magura master cylinders, as an order item, from Tucker Rocky. Any dealer, or most on line sources should be able to get you one. They had two bore /plunger sizes available. They were only around $80, That was awhile back.

If you go after market, it is very important to get a master cylinder with the same size bore. To big of a bore will move a lot of volume, but insufficient pressure, To small of a bore, higher pressure lower volume.

Used master cylinders should be easy to come by. Getting the right size bore would probably be hit and miss.
"The Constitution? I'm pretty sure the patriot act killed it, to protect our freedoms" Bart Simpson

14 R1200RT 09 KTM 450 EXCR 75 Norton 850 E-Start It's going to run. I swear! 69 Z-50A Mini Trail with Lights 03 GasGas 280 Pro 03 CRF 230
mikeysduck is offline   Reply With Quote
Old 05-09-2013, 06:53 AM   #4
Trials Evangelist
Joined: Oct 2009
Location: Minneapolis, Ks
Oddometer: 1,484
Originally Posted by neilking View Post
Uh, the master cylinder is broke not the lever.
Sadly it was obvious he needed to get that welded up (at the wont mess up the plunger areas at least) and he might have saved it for a while.

now he has a problem, and I will bow out of this one, defer to you Honda-tessa heads....
Sting32 is offline   Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Times are GMT -7.   It's 03:30 PM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2015