ADVrider

Go Back   ADVrider > Gear > The Garage
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
Old 01-27-2013, 08:44 PM   #1
Kevin K OP
Adventurer
 
Joined: Jul 2008
Oddometer: 47
wire connectors

I want to make a few sano wire connections for signals and tail lights. On the rear I want to run a versa light in addition to to signals and a tail light,so ill have to split off of the feeding wires. Where do I get water proof connectors ? I don't want to use home depot bullet connectors . I am so impressed by the builds I see on here. I know I'm in the right company to askThanks
Kevin K is offline   Reply With Quote
Old 01-27-2013, 08:50 PM   #2
JimVonBaden
"Cool" Aid!
 
JimVonBaden's Avatar
 
Joined: Feb 2005
Location: Alexandria, VA
Oddometer: 46,891
Positaps are what I use. www.cyclenutz.com

http://www.cyclenutz.com/search.asp?...x=0&search.y=0

They won't damage the wire, and are totally reversable.

Jim
JimVonBaden is offline   Reply With Quote
Old 01-27-2013, 08:55 PM   #3
MaestroPNW
Me!
 
MaestroPNW's Avatar
 
Joined: Jul 2010
Location: Greater Seattle
Oddometer: 81
I used this to make a disconnectable harness for the taillights in the top box http://www.wiringproducts.com/contents/en-us/p672.html
Ground, Tail, Brake, Left and Right turn signals, with one lead left spare.

I also have aux lights on my side boxes, and they are connecting using 4-flat connectors (ground, tail, brake and 1 corresponding turn signal)

If you are talking about how to tap into the factory wires, I'd see if factory connectors could be obtained to make a plug-in harness to avoid splicing at all. E.g. for V-Strom, http://www.easternbeaver.com/ sells tail lights harness adaptor.
MaestroPNW is offline   Reply With Quote
Old 01-28-2013, 06:34 AM   #4
Kevin K OP
Adventurer
 
Joined: Jul 2008
Oddometer: 47
Thank you guys . I knew I came to the right people
Kevin K is offline   Reply With Quote
Old 01-28-2013, 07:02 AM   #5
Twilight Error
Beastly Adventurer
 
Joined: May 2002
Oddometer: 22,257
I've been having success with the solder splice connectors that are available at Home Depot. They have a ring of low temperature solder and adhesive within a heat shrink tube. All you need is a heat gun capable of >600f temperatures.
Twilight Error is offline   Reply With Quote
Old 02-03-2013, 04:46 AM   #6
Sharkguy
chain lube applier
 
Sharkguy's Avatar
 
Joined: Nov 2009
Location: Ocoee, FL (downtown BFE)
Oddometer: 179
Ditto what Twilight said. I occasionally wire up 12 volt submersible pumps to transport aquarium fish, sharks, and stingrays.These pumps have to be reliable and sometimes run for days, depending on circumstances of transport. Those are the type of connectors I use. I get them from McMaster-Carr. I also use the heat shrink tubing from them that has a sealant liner. Using both would be a bit of overkill on a bike but there are applications for both.
__________________
"Took a look down a Westbound road,right away I made my choice. Headed out to my big two wheeler I was tired of my own voice. Took a bead on the Northern plains and just rolled that power on. "
Bob Seger
Sharkguy is offline   Reply With Quote
Old 02-03-2013, 05:00 AM   #7
Laconic
Let's Get Primitive!
 
Laconic's Avatar
 
Joined: Sep 2007
Location: Moran Nation, NC
Oddometer: 14,548
+1 on the Positap connectors JVB mentioned.
Laconic is offline   Reply With Quote
Reply

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 09:44 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014