Separate names with a comma.
Should be fixed!!!
It's either eBay is getting weird or I'm fumbled fingered.
Most likely the latter!
I'll check it out.
Sorry for the long wait. We now have all tooth counts of the XR650L sprockets back in stock.
Also, grind some reliefs for the punch around the bearing seat. Makes it a lot easier to knock the race out next time.
Too much work making that installer. Just grind down the od of an old race on bench grinder:
WOW, what a great place to ride!!
More like Tampon clearance.
Mine never leaks down either.
I have put in a new oil pump just as a good maintenance procedure ( 1996 mod. 32K mile 5W-40 syn ).
I have thought...
N2 is best, but hard to find a place that can get the pressure you need in one MC shocks. So I usually get the max. N2 PSI I can then hand pump...
Just follow the setup instructions in the manual ( adjustments and air gap ). Also, check the preload. The previous owner of my bike took out the...
And a Diamond brand breaker:
On the driveability issue under discussion, could be water in your fuel. If you can find some, try straight gasoline.
I had a similar issue with...
These guys do great work: