1996 Scorpa Easy Clutch lubication

Discussion in 'Trials' started by grumpybear, Feb 22, 2013.

  1. grumpybear

    grumpybear Been here awhile

    Joined:
    Dec 1, 2009
    Oddometer:
    338
    Location:
    Rural NE Alberta
    Bought a 96 Scorpa 250 Easy for fun but I'm doing some work on it before I get to the fun part.

    In the process of replacing the 2 o rings on the clutch slave cylinder, I drained out about 2 oz's what appears to be ATF from the clutch compartment.

    Any ideas what should the lube oil be for the clutch basket and the volume?

    ** edit: figured it out. Used ATF for clutch bath lube and ATF in the clutch master cylinder. If the Orings leak, no big deal. Filled the clutch side up through the bolt hole on the side of the clutch cover till it ran out. Played with it for a25 minute ride up and down the driveway, everything seems to be working good**

    Thanks,
    grump
    #1
  2. lineaway

    lineaway Long timer

    Joined:
    Oct 1, 2011
    Oddometer:
    3,279
    Location:
    nm
    I did not think they had a seperation between the tranny and clutch. I would call Mike at the tryals shop to make sure!!
    #2
  3. hazza

    hazza n00b

    Joined:
    Jan 20, 2012
    Oddometer:
    7
    Location:
    Tasmania, Australia
    I use automotive brake fluid in master cylinders,
    Transmission oil recommended is 5W 40 not readily available, so I use 10W 40 and it works fine 650mm
    #3
  4. grumpybear

    grumpybear Been here awhile

    Joined:
    Dec 1, 2009
    Oddometer:
    338
    Location:
    Rural NE Alberta
    Changed the transmission over to 10W40 oil, added 650CC.

    Thanks for the information,
    grump
    #4