2010 ADV Vacuum Connector PN?

Discussion in 'Crazy-Awesome almost Dakar racers (950/990cc)' started by amanlikemike, Mar 23, 2014.

  1. amanlikemike

    amanlikemike Recovering Speedfreak

    Joined:
    Apr 30, 2010
    Oddometer:
    1,101
    Location:
    NorCal by way of NOLA.
    Anyone know the part number for the brass screw-in nipple that connects the vacuum pump hose to the front cylinder (left side) and rear cylinder (right side)?

    While yanking the pump I broke one and couldn't reuse it to run the cross hose between cylinders recommended in Katoom119's canisterectomy walk-through.

    The fiche shows the same part number of 61036023100 (confusingly with differing jet diameters though!) for the ones on the left and right sides. But - as I discovered when I got the new one - they're not the same.

    One that was in there (sans snapped thread - don't ask!) on left. Replacement '2006' part on right:

    [​IMG]

    Would it matter if I used the same connector on both sides of the cylinder (both connectors have the same thread and therefore fit - I'd just need to use a narrower hose and clamps than on the vacuum pump)? Or do I need to hunt down one of these mythical 0.5mm jet 'non-2006) versions?

    Ta,


    Michael
    #1
  2. amanlikemike

    amanlikemike Recovering Speedfreak

    Joined:
    Apr 30, 2010
    Oddometer:
    1,101
    Location:
    NorCal by way of NOLA.
    PN is 60036023100.

    And I'm an idiot. :fpalm

    Sorry for wasting your time.
    #2