86 honda ch250 roller weights

Discussion in 'Battle Scooters' started by honda_dood86, May 1, 2013.

  1. Wentwest

    Wentwest How's that work?

    Joined:
    Feb 19, 2007
    Oddometer:
    701
    Location:
    Northern California
    Better rear shocks, decent tires with 32 pounds of air in them, Dr. Pulley sliders or stock style rollers with no flat spots, a very simple valve adjustment and you should have a great scooter. If you get sudden cutting out, it's the old CDI, and you can buy a new one from Scrappy Dog.

    An absolutely super scooter!
    #21
  2. honda_dood86

    honda_dood86 dood

    Joined:
    Apr 30, 2013
    Oddometer:
    17
    Still putting back together, man that air breather is a pain to get up in there all buttoned up real tight with all hoses and boots tight and screwed down. Gonna throw a paintjob on the muffler and finish putting air cleaner on and hopefully be riding tomorrow. Im gonna run 20w50w in the engine does anyone else run that?
    #22
  3. honda_dood86

    honda_dood86 dood

    Joined:
    Apr 30, 2013
    Oddometer:
    17
    Well got it back together, the clutch made a chattering sound I put new clutch shoes and springs and cleaned and regreased drive face put it all back together and the clutch bell made chattering noise so I took bell off and started it with open clutch shoes and it made no noise so I dont know any suggestions? Is it normal or what?
    #23
  4. honda_dood86

    honda_dood86 dood

    Joined:
    Apr 30, 2013
    Oddometer:
    17
    She doesn't wanna jus start right up and idle, have to keep turnng over for it to finally start then it runs like it has no power with the throttle wide open
    #24