I had bought a set of LED lights from cyclopsadventuresports.com (Off Road Ryder here on ADV) and needed a way to mount them to my 2007 KTM 950 SM-R and decided to make myself some fork clamps. I own a CNC machine shop so I get to do things like this in my free time (which I have virtually none of ) These clamps are designed to mount to the fork in the area under the lower triple clamp (60mm diameter) Some people had expressed interest in a set and things are slow at the shop so I figured I'd make a few and see what happens. These are billet aluminum with stainless 5/16-18 SHCS. If I ever do another run I'll make the switch to metric fasteners. They clamp a 60mm diameter and are about .800" thick (20.32mm) They will come black anodized. They are beefy and strong as hell. See pics below of me standing on them. If you needed to winch your bike out of a mud pit you could hook to these brackets if you had to. Im offering these for $166.00 shipped in a flat rate box anywhere $6.00 will take a flat rate box. If you're overseas I'll gladly work with you but shipping would cost whatever it costs. That price is for the set, 2 caps, 2 brackets, 4 stainless screws (nothing to rust!) and I take paypal. According to my local KTM dealer these will fit any KTM/Husaberg with the 48mm fork. I know they bolt right on to my 2010 KTM 450 EXC. You confirm though if you're buying for a bike other than an 07 SMR *****If there is enough interest in other sizes I would make these to fit other bikes.***** I took the lights off for this one. . .