Billet LED light bars

Discussion in 'Vendors' started by Bigtoy302, Oct 24, 2012.

  1. Bigtoy302

    Bigtoy302 Adventurer

    Joined:
    Oct 23, 2012
    Oddometer:
    12
    Location:
    Eugene, OR
    These light bars are my latest creation.

    Machined from solid 6061-T6 aluminum in house
    7.875"wide,1.875"tall, 3"deep 2.8LBS Anodized black
    6 Cree XM-L LT5 5000k LEDS
    63 watts
    12-22 Volts
    Reverse battery protection
    Micro controller
    Thermal protection at 158°F 70°C
    Changeable Optics
    Abrasion Resistant Polycarbonate lens

    Lights are made in house in the USA

    High, Low and strobe modes accessed from a single ground momentary switch.

    Standard hook up is connecting the power and ground directly to your battery and the mode wire turns it on/off selects modes.

    Option power:
    Light will turn on high when power is hooked up. Use this option if you want to wire the light to a relay and power it from switch like your high beams.

    Lights will come with brackets of your choice: Weld on flat, Weld on 1.75" tube, 304 stainless L

    Light comes with 10ft of wire. You will need to provide a fuse and switch.

    On my Drz400 I have it hooked to the battery and use my old push button kill switch to turn on the light. This light makes night riding fun

    $350 Each

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    RyDel Fab Led light bar operation - YouTube

    RyDel Fab

    Ryan
    #1
  2. Bigtoy302

    Bigtoy302 Adventurer

    Joined:
    Oct 23, 2012
    Oddometer:
    12
    Location:
    Eugene, OR
    Night beam shots.
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    #2
  3. rs42sport

    rs42sport Been here awhile

    Joined:
    Jan 3, 2010
    Oddometer:
    214
    Location:
    glenview, il
    Kool any nite pics with all spot lenses??? Good luck with your product
    #3
  4. Bigtoy302

    Bigtoy302 Adventurer

    Joined:
    Oct 23, 2012
    Oddometer:
    12
    Location:
    Eugene, OR
    The first pic is all spots. I do not have any other pics. I run the combo on my Drz.
    #4
  5. Bigtoy302

    Bigtoy302 Adventurer

    Joined:
    Oct 23, 2012
    Oddometer:
    12
    Location:
    Eugene, OR
    In stock! Get the best and the brightest!

    I am going to add some more lights to the line up soon. Working on a small round light using 3 Cree XM-L2's that will belt out 3000 Lumens for under $200 each!
    #5
  6. Bigtoy302

    Bigtoy302 Adventurer

    Joined:
    Oct 23, 2012
    Oddometer:
    12
    Location:
    Eugene, OR
    Sneak peek at the new prototype.



    [​IMG]
    #6