BMW G650X Challenge Thread Index

Discussion in 'Thumpers' started by GB, Apr 24, 2008.

  1. Perun

    Perun Been here awhile

    Joined:
    Mar 3, 2011
    Oddometer:
    415
    Location:
    Belgrade, Serbia
    If you look for DOT legal off road tyre, next time try Pirelli Scorpion XC Mid Hard. I am on my second set and I will stick to them. Excellent for off road, the are OK on pavement...
  2. tbarstow

    tbarstow Two-wheelin' Fool

    Joined:
    Jul 9, 2007
    Oddometer:
    4,269
    Location:
    Viva Lost Wages!
    The knobbies do a lot better on the road than you'd think. They stick like glue. The only thing you'll notice is that once the front starts to wear, you'll get a bit of headshake on the pavement because the tire wants you to go around the center knob instead of directly over it.
  3. Meriden

    Meriden Yea whatever

    Joined:
    Oct 26, 2010
    Oddometer:
    1,103
    Location:
    In the garden behind the dacha
    Thanks for the ideas.

    I'm taking three spare filters for the trip. One to change after Arizona, another half way through LAB2V and another as a spare. They weigh nothing and there is plenty of room in the cantle bag for a spare.

    As for the bearings, they are on order from Germany and should be in this week. If they arrive before the weekend, and there are no last minute tasks to eat up my time, I'll may change them anyway.

    Last year I was using City Navigator maps which are not very detailed in this kind of environment. This year I've switched to topo 100k. I'll give 800ft a shot.

    m
  4. Meriden

    Meriden Yea whatever

    Joined:
    Oct 26, 2010
    Oddometer:
    1,103
    Location:
    In the garden behind the dacha
    I'm using MT21s and find them plenty sticky on the road. They do ware fast. Plan on flipping your front tire about half way through it's life.
  5. Royal Tiger

    Royal Tiger Sd Kfz 182

    Joined:
    Sep 21, 2006
    Oddometer:
    2,697
    Location:
    Lehigh Valley, PA
    Thanks T. And keep us in the loop on your gas cap solution. I'd be interested in one as well. Sorry a little cross thread posting. :D

    Meridian, the MT21 isn't directional?
  6. Lonsdale

    Lonsdale GravelLord

    Joined:
    Aug 18, 2013
    Oddometer:
    23
    Location:
    Sweden
    I drive my X mostly, about 80-90%, in the swedish forests where the surface is a combination between gravel, mud and grass. I find the Michelin T63 more then suited for this purpose.

    Use tirelocks and lower the pressure to about 1-1,2 bar.
  7. Meriden

    Meriden Yea whatever

    Joined:
    Oct 26, 2010
    Oddometer:
    1,103
    Location:
    In the garden behind the dacha
    I didn't see a little arrow so after some research into the subject I did the flip with no ill effects. All it did is make the tire wear more evenly.
  8. Royal Tiger

    Royal Tiger Sd Kfz 182

    Joined:
    Sep 21, 2006
    Oddometer:
    2,697
    Location:
    Lehigh Valley, PA
    Good to know. Thanks.
  9. TobyG

    TobyG be happy :)

    Joined:
    Dec 27, 2011
    Oddometer:
    1,034
    Location:
    NemĨija
    Same here.

    I ran it for another 10'000 (!) km after I flipped it.

    Mind you, those 10'000 km the tire had an easy life, being mounted during my trip through the Balkans.
    (I take it easy during extended trips)
  10. EdiA

    EdiA Adventurer

    Joined:
    Jun 24, 2013
    Oddometer:
    84
    Location:
    Norway
    Hi!

    I am currently modifying the X to an adventure tourer. So I decided to fit some bar risers. Found out that a lot of guys use Rox risers but I don`t know which one of their products to use...

    Which of the rox risers fit the X without having to modify the cables and wires or which one fits with just rerouting the cables and wires? Has anyone here done it?

    :ear:ear:ear
  11. jonnyc21

    jonnyc21 Trials Ninja

    Joined:
    Feb 8, 2011
    Oddometer:
    2,602
    Location:
    Boise aria
    I was able to use the larger TT one without having to change anything but some slight positioning. Jus my EXP. Good luck.
  12. Bli55

    Bli55 -

    Joined:
    Mar 7, 2012
    Oddometer:
    524
    Location:
    Russia, N56 E49.
    Able to fit a ROX pro offset block riser (rigid, so won't pivot when you fall like regular rox risers) with standart bars AND ABS.
    Only problem is that it is still not high and forward enough for me...
  13. Bli55

    Bli55 -

    Joined:
    Mar 7, 2012
    Oddometer:
    524
    Location:
    Russia, N56 E49.
    Please, help me with out here!
    I'm looking at my swing arm, or swinging arm, as BMW likes to call it. :D

    This is the right side, with a closed cup needle bearing.
    It is supposed to be pressed in by 4mm, to accept the 4mm wide seal, I guess.

    [​IMG]

    However, in my case, it seems like its pressed in too deep! :huh
    Should it stick out the other side (inner side on the swingarm)?

    [​IMG]

    [​IMG]

    The outside face. Here, the seal was pressed it but it goes deeper, it is not flush with the face and the spacer as I think it should be (4mm depth and 4mm seal). :huh

    [​IMG]

    [​IMG]

    What do I do??

    Second worry is this pin on the other attachment site (open needle bearing side).
    Shall I replace it? The grooves are not uniform around and are noticeable with fingernails.

    [​IMG]

    [​IMG]
  14. tommyvdv

    tommyvdv Been here awhile

    Joined:
    Mar 18, 2011
    Oddometer:
    430
    Location:
    Belgium
    anyone willing to share their reprom service manual for these bikes?
  15. Erik RS

    Erik RS Three Wheel Maniac

    Joined:
    Feb 10, 2008
    Oddometer:
    467
    Location:
    Cloggyland
    Tommy you'll receive mail :wink:
  16. tommyvdv

    tommyvdv Been here awhile

    Joined:
    Mar 18, 2011
    Oddometer:
    430
    Location:
    Belgium
    i'm building up quite the "IOU"
    thanks!
  17. jabroka

    jabroka Been here awhile

    Joined:
    Nov 11, 2008
    Oddometer:
    351
    Location:
    Buenos Aires, Argentina
    hey guys,

    as some may know, having the TT fairing kit with twin headlights+ GPS + 12v socket, water temp gauge, etc. the wiring on the bike quickly becomes a rat's nest, with many cables coming from the battery and fuses and relays all over the bike.

    So I decided to get a power distribution block, and after a lot of forum reading, the choices came down to 3 options:

    Centech fuse block
    Fuzeblocks unit
    PDM-60

    The PDM is for sure, the most tech advanced block, very small, no fueses, software configurable, waterproof etc. price is @ $200

    The centech unit is a well proven block, I found no issues with this unit, no integrated relay and its the cheapest, around $60

    The fuzeblocks unit is right in the middle. integrated relay (for switched applications) medium sized and uses mini fuses. price is about $90

    At first, I was all about the PDM60, but its double the price of the fuzeblock and it seems it would be impossible (or at least very hard) to repair or "jump" in case of a failure in the middle of nowhere.

    So I went for the fuzeblocks unit.

    Install is very simple, 2 wires coming from the battery, 1 wire to a switched 12v feed, thats it.
    It has 6 + and 6 - connections, just select if the accesories are constant fed or switched by moving the fuses.



    [​IMG]


    [​IMG]
  18. mtncrawler

    mtncrawler Long timer

    Joined:
    May 17, 2003
    Oddometer:
    1,447
    Location:
    Fort Collins, CO

    Thanks for the write up..:clap

    I'm just researching/considering this mod myself..
  19. Yukon Ho!

    Yukon Ho! We can go ANYWHERE!

    Joined:
    Oct 2, 2011
    Oddometer:
    234
    Location:
    Seattle/Mazama
    I did PDM60 in 2011. Zero issues in 18 months. Love it.
    Fuses = ten less things I have to carry and think about and access to swap.
    Mounted the PDM right under the seat, easy to check.

    To clean up the battery rats nest I like Powerlet's Termin-8. Yes I cut the fuse holder out of that too!
  20. advFord

    advFord Been here awhile

    Joined:
    Jan 16, 2012
    Oddometer:
    599
    Location:
    Orange County, CA
    What switched wire did you tap? (location, color?)