CJDesigns Footpegs

Discussion in 'Vendors' started by cjracer, Mar 20, 2009.

  1. cjracer

    cjracer AWD please!!

    Joined:
    Sep 26, 2005
    Oddometer:
    3,997
    Location:
    Mukwonago, WI
    WOW!! :eek1

    This was more of a response than I was thinking.

    Sorry for the delay, I was in the shop cutting Titanium all weekend.:wink:

    Of the questions asked here are the answers:

    Peg Placement- No change

    Different versions-

    LC4 version- Not yet. I'd need a peg set to work off of to make different version. I have a 2000 LC4 so that might be the next version. Send me a part number if possible along w/ the year and make/ model of the bike.

    I've got some BMW riders looking for stuff to this would help.

    Size of Peg-

    Wider front to Back.... How wide are you looking for? I can make just about anything.

    Material-

    This version is 6061 aluminum along w/ all the test version.

    I think I'll switch to 7075 Aluminum if this takes off. The entire pegs is one piece. I've got a similar setup on sleds and it works out well. Doesn't rip your boots to shreds like some, but you stay put too. The easier and less time it takes to machine and the less parts involved the cheaper I can sell them for.

    Just to clarify I have NO "Test" versions in stock. This is a part I'm looking to make more of. I'll be contacting those that made the cut via PM w/in the week or so. If you see this and like them/ hate them please still post your thoughts, but as of now all the future test units have been spoken for.

    I plan to make a few, get them out to the riders to have them use them/ abuse them in the real world. Once I get feed back from them I'll decide to make more or what needs to be changed.

    I appreciate the feedback and hope to offer a product that works well for most.

    Pictures of the Orange version will be posted this week when I get them back.:ricky

    thanks,
    cj
    #21
  2. GSteve

    GSteve Long timer

    Joined:
    Feb 26, 2003
    Oddometer:
    1,610
    Location:
    Little Rock, AR
    As for the LC4, mine's an '06 also. Just let me know when you want them and I'll get them sent off to you. Any idea when you'll be headed to Mexico?
    Part # 59003041250 Right side
    59003040250 Left side

    Regards,
    Steve
    #22
  3. HOT DAMN!

    HOT DAMN! ♪ ♪ ♪

    Joined:
    Aug 31, 2007
    Oddometer:
    7,633
    Location:
    Hammond, IN.
    I'd buy a set if they became available. :deal
    #23
  4. Holaday

    Holaday Man of Leisure

    Joined:
    Sep 4, 2006
    Oddometer:
    629
    Location:
    Vancouver's North Shore, B.C.
    Hey CJ

    I will take a set when there ready to go. Do you have a ball park estimate for when your going into production. THANKS BLAIR


    Make mine a DIY kit
    Black or silver
    #24
  5. boosted gp

    boosted gp Adventurer

    Joined:
    Mar 15, 2008
    Oddometer:
    38
    Location:
    Guateng, South Africa
    I Would also love 2 sets, Silver preferably,

    I live is South Africa, ,so I will PM you my address

    Shot
    #25
  6. cjracer

    cjracer AWD please!!

    Joined:
    Sep 26, 2005
    Oddometer:
    3,997
    Location:
    Mukwonago, WI
    I hope to start making the "Test" units early April. Get them out and see what feedback I get from those riders. I think the earliest these might be ready for everyone else would be end of April early May. I know that may be a "Long" time away, but I don't want to sell stuff that is junk and has no testing time on it. If I wouldn't use it, I won't sell it.

    Looking through all these posts one thing I'll need to know is if you want a "Do it yourself" (DIY) Kit or the ready to install (RTI) peg combo. Please post this info in your reply and if you could add this to your earlier posted reply that would be great.

    I'm puting everyone down on a build listthat said they want a set so I know how much stock I need to start and help me figure out a cost. After these "Test" units are done I'll post a price and update the first post.

    There will be a few options.

    -If I have pegs in stock, I can offer the RTI kit w/ a peg swap core charge.

    Send me your pegs and springs I'll send you a set of built pegs and springs ready to drop in. No fighting. Everything slips together, snip the spring retainer and ride.

    -If you don't have stock pegs to exchange and need an entire new RTI kit the cost of a set of pegs will be added to the kit. I'll try and find cheaper used pegs to bring the cost down, but those will be limited to what I have on hand.

    -If you want to drill the 6 holes yourself, the DIY kit will be the cheapest option. Kit will include Large peg set and hardware and directions. Hold the extension around the stock pegs, mark the position, and drill the holes.

    Thoughts???:ear

    thanks,
    cj
    #26
  7. brents347

    brents347 Trusting my Cape...

    Joined:
    Mar 5, 2006
    Oddometer:
    4,391
    Location:
    Where the hell is Truckee, CA?
    CJ-

    I updated my original post (#8) to l say this,

    UPDATE- CJ, I would proably prefer the drill-it-yourself version, but I can go with whatever is convenient for you. Also, either way I can donate a set of stock pegs to the cause if you need them. Just let me know and I'll drop them in the mail and they are your to do with what you wish.

    Brent<!-- / message --><!-- sig -->
    __________________
    #27
  8. PackMule

    PackMule love what you do Super Moderator

    Joined:
    Aug 8, 2005
    Oddometer:
    19,485
    Location:
    New Hampshah
    GS800? :ear
    #28
  9. RXV_Poor

    RXV_Poor Been here awhile

    Joined:
    Nov 4, 2006
    Oddometer:
    447
    Location:
    Jackson, CA
    I want to try these on pivot pegs.
    #29
  10. RogerDe

    RogerDe Dust In The Wind

    Joined:
    Dec 3, 2007
    Oddometer:
    271
    Location:
    Texas
    I'd like a set of the drill it youself peg's for my SE...Craig I think it would be an easy project with all the designing your doin....Ride On..
    #30
  11. HOT DAMN!

    HOT DAMN! ♪ ♪ ♪

    Joined:
    Aug 31, 2007
    Oddometer:
    7,633
    Location:
    Hammond, IN.


    D I Y
    #31
  12. wsdbikes

    wsdbikes New Max is Mad

    Joined:
    May 8, 2007
    Oddometer:
    1,282
    Location:
    PNW
    I would like a DIY for R1100GS BMW. In the works?
    #32
  13. Dusty

    Dusty Long timer

    Joined:
    Jun 15, 2007
    Oddometer:
    1,374
    Location:
    Bismarck
    DIY kit...:thumb
    #33
  14. cjracer

    cjracer AWD please!!

    Joined:
    Sep 26, 2005
    Oddometer:
    3,997
    Location:
    Mukwonago, WI
    I'd need a set of pegs to work off of, have any leads. Only GS800 I've seen was at the Chicago IMS show. Forgot to get some pics.
    #34
  15. cjracer

    cjracer AWD please!!

    Joined:
    Sep 26, 2005
    Oddometer:
    3,997
    Location:
    Mukwonago, WI

    Could be done, would need a set of pegs though. I'll put it on the list.
    #35
  16. cjracer

    cjracer AWD please!!

    Joined:
    Sep 26, 2005
    Oddometer:
    3,997
    Location:
    Mukwonago, WI
    Is this for the 95' you have? If I made a set it would most likley be for the newest bikes first though.

    Once I get some feedpack on the KTM pegs I'll know better how these will adapt to other bikes.

    For pegs other than the original KTM, if you can post of a picture of the pegs you'd like to have these made for that may be helpful.

    thanks,
    cj
    #36
  17. PackMule

    PackMule love what you do Super Moderator

    Joined:
    Aug 8, 2005
    Oddometer:
    19,485
    Location:
    New Hampshah

    I can get you whatever kind of measurements/pics/etc that you need.


    What kind of down time are you looking at for actually needing pegs in hand? :ear
    #37
  18. fire_strom

    fire_strom Long timer

    Joined:
    Sep 21, 2004
    Oddometer:
    1,265
    Location:
    Durango, CO
    I'm in for any color. DIY, 950ADV.
    Scott
    #38
  19. cjracer

    cjracer AWD please!!

    Joined:
    Sep 26, 2005
    Oddometer:
    3,997
    Location:
    Mukwonago, WI
    W/ a good set of pics and some measurements I can figure 75% of it out before hand.

    When this gets going. I'd think no more than a week to fit them up and send them complete back to you.

    I'll post when I'm ready to go onto other pegs, but if you want to send me some pics and measurements now that would help.

    craig at cjdesigns llc . com
    #39
  20. RXV_Poor

    RXV_Poor Been here awhile

    Joined:
    Nov 4, 2006
    Oddometer:
    447
    Location:
    Jackson, CA
    I'll send them to you if you want.
    #40