Etymotic ER6i earbuds discontinued: now what??

Discussion in 'Equipment' started by John Smallberries, Nov 3, 2011.

  1. John Smallberries

    John Smallberries Long timer

    Joined:
    Aug 31, 2009
    Oddometer:
    1,350
    Location:
    Northville, Michigan
    I've tried many different earbuds for riding and found the Etymotic ER6i to be a great solution for 1) isolating wind noise, 2) providing excellent sound quality and 3) not sticking out of my ear to rub against my helmet liner, 4) reasonable price ($110 delivered to my door).

    Looking at their website (http://www.etymotic.com/ephp/epcomp.html) - they have been discontinued! All of the remaining models look to have relatively long housings. Mine take a bit of strain every time I take my helmet on/off - I got 12 months out of my first set. You can still get them off eBay, but that can't last forever.

    What is the next best choice in the same price range (or less).?
    #1
  2. LateApex

    LateApex Adventurer

    Joined:
    Jan 31, 2008
    Oddometer:
    57
    Location:
    Chicago
    I've been using Shure's SE315 for a while now. They work great, come with 3 different sized ear rubbers and foams (I like the foams best for riding), fit well under a helmet and are super heavy duty. The cords are also detachable from the earbud so they can be replaced if needed, although the cords are also heavy duty enough I doubt if that will ever happen.

    http://store.shure.com/store/shure/en_US/list/categoryID.12165500
    #2
  3. soyanarchisto

    soyanarchisto Long timer

    Joined:
    Sep 1, 2005
    Oddometer:
    3,646
    Location:
    Sunny PDX
    $215 for earbuds? Wow.
    #3
  4. Wlfman

    Wlfman Long timer

    Joined:
    Sep 6, 2011
    Oddometer:
    1,294
    Location:
    TN/AL
    That SUX :cry

    Those were great ear buds. And as you stated, they didnt stick out and rub the helmet
    #4
  5. guavadude

    guavadude de-composer

    Joined:
    Aug 31, 2009
    Oddometer:
    922
    Location:
    Dallas, TX
    I tried a bunch of earbuds until I found these Shure SE-115s, $89 on Amazon

    http://www.amazon.com/Shure-SE115-R...KMLY/ref=sr_1_5?ie=UTF8&qid=1320350464&sr=8-5

    I use the smallest rubber inserts and they seal out wind noise so much better than any earplugs I have tried.
    The detachable cable is great when you stop to get gas and want to keep the helmet on.

    tips:
    They are designed to have the cable go over your ear which doesn't work with a helmet, so use the right in the left ear and the left in the right ear.

    Use the smallest rubber insert, you will want to seat them in as far as possible.
    I give them a little finger/spit lube when I put them in, then put on the helmet, then pull the helmet off to one side, slide your hand up in there and seat them in one at a time really good and as deep as they'll go. Fasten chin strap and you're good to go. You'll know you have them in right when you can't hear anything and you have a head voice.

    I use the treble boost setting on my ipod since the eq is a little dark on them. This results in very nice natural non-fatiguing high end. I also use the volume leveling feature on itunes to keep the tracks at the same relative volume.

    When removing your helmet, reach in on each side and remove the earbuds first.

    I do music for a living and love the way these sound. I'm very careful with my ears and can't stand wind noise.
    Highly recommended.
    #5
  6. hrolf

    hrolf neophyte

    Joined:
    May 26, 2010
    Oddometer:
    237
    Location:
    city on a hill
    the model bump to the er6i is the MC3: http://www.etymotic.com/ephp/mc3.html

    same price, slightly longer body, and an inline remote / android & iOS compatibility.

    The big open question is whether or not they're as great for not chafing inside your helmet as the er6i's were -- and i don't know the answer.

    Otherwise: same kickass company, presumably same kickass performance, and they've got a higher NRR than the er6i's, to boot!
    #6
  7. EJ_92606

    EJ_92606 Rider

    Joined:
    Aug 29, 2007
    Oddometer:
    1,779
    I bought the MC3s recently and they will work under the helmet, you just need to be sure to insert them fully and be a little bit careful putting on and removing your helmet. The noise reduction is phenomenal....frankly, almost too much. I may ride with only one earphone and one earplug so I can get a little bit of engine and ambient noise.
    #7
  8. nytrashman

    nytrashman old and in the way

    Joined:
    Mar 5, 2007
    Oddometer:
    596
    Location:
    westchester co. NY
    i know this doesn't help but when i find something that works i always buy a second pair just in case they become discontinued.

    i have tried more brands of earbuds then i care to remember and what i have found is none of them compare to custom earphones. the customs are more comfortable, fit better, go in easier etc. yes they are not cheap but we spend so much money on our bikes that a couple of hundred dollars (Westone CR1 in ear monitors are $289.00, including the ear impressions) on quality earphones seem like a good deal to me. if you try two or three pair of various brand earbuds before you find ones you like you have most likely spent the equivalent of what a pair of custom in ear monitors would cost.
    #8
  9. swimmer

    swimmer armchair asshole

    Joined:
    Oct 9, 2007
    Oddometer:
    5,111
    Location:
    tucson, AZ, It's a dry hate.
    +1. Had my ER6i's for a couple of years. I can't believe how well these things hold up. Far surpassed expectations.
    #9
  10. kawalaser

    kawalaser Hip to be square

    Joined:
    Jun 13, 2007
    Oddometer:
    8,520
    Location:
    Germany
    I will second all the ER6i praise. mine have lasted quite a while, for earbuds. Purchased in 2009. Since then, the rubber shroud protecting the wire leading into the jack cracked. As a precaution, I wrapped it with electrical tape knowing this connection to be a common failure point among many a brand of headphones. No complaints! I removed the filters, they seem unnecessary and the phones seem to sound better and with the filters removed. I use the larger rubber flanges, and they wore out to a point where they would frequently become disconnected. Ordered 10 pairs of flanges straight from the manufacturer for around 10 bucks on amazon.

    These phones see so much use particularly when I need a quiet study environment. Sad to see them discontinued.
    #10
  11. JGBrown

    JGBrown Been here awhile

    Joined:
    Sep 15, 2010
    Oddometer:
    248
    Location:
    Vancouver, Canada
    I really like the Shure 215, 99$ at London Drugs, the Wirecutter reviewed them as the best bang for your buck in the price range and I have to agree.
    I miss my ER6is, but I don't miss the shitty cord.
    the cord on these is tough and replaceable. Also after a bit of research I discovered that any headphones using a 2.5mm tube can use Etymotic tips. Of course I discovered this right after I got rid of an entire bag of them.
    I don't like the stock foam tips, they take more effort to put in and more care to make sure they stay seated while putting on the helmet. I think with the Etymotic silicone tips again I'll have a perfect fit.

    I don't like the MC3 because of the longer body, having the body turned sideways like shure makes more sense to me. I also don't understand why you can't wear them properly with the wire over the ears?:huh
    I must be doing something wrong, because I wear them that way every day on my commute, and have for 5 months...
    I tried reversing them and letting them hang out, but they always get pulled out when I'm putting on my helmet then. I also make sure to pull outwards on my helmet straps when putting on the helmet, that makes a sort of channel so the helmet doesn't drag on them and hurt my ears.
    #11
  12. RxZ

    RxZ Legal Drug Dealer

    Joined:
    Mar 27, 2010
    Oddometer:
    1,917
    Location:
    Tyler, TX
    I just replaced the filters in mine about a month ago. One ear bud was to the point that in a quite environment, I could just barely hear anything. The other side sounded pretty good I thought. I wasn't sure what was going on, but since they send you an extra set of filters I figured why not before buying new earbuds.

    After changing the filters both sides now sound great! Turns out that over time a little bit of ear wax had got on the filter, and was blocking the sound. Knowing that, and that I have to clean a very small amount of wax off the buds after wearing them, I think I will recommend keeping the filters in. I bet the sound is a little better without them, but the tradeoff isn't worth it to me.

    Sad to hear about the ER6i being discontinued. I love mine. I really like them on airplanes, blocks out pretty much all engine noise, and at a fraction of the cost of the Bose headphones that get all the advertisements! When my ER6i breaks, I will try this new line (although I am a little concerned about the longer body). I have been very happy with them.
    #12
  13. enduro0125

    enduro0125 Sticks and Stones™..

    Joined:
    Nov 16, 2006
    Oddometer:
    15,153
    Location:
    Orchard Park,NY
    I sent in a pair of er6i's in early October for warranty replacement.
    I was informed that they were being discontinued,the person I spoke with suggested the hf5 as a replacement.

    She said they worked underneath helmets,and she was right.
    No long days with them yet,but so far I'm very happy with them.
    #13
  14. LocuL

    LocuL Gnarly Infantry

    Joined:
    Dec 5, 2006
    Oddometer:
    1,409
    Location:
    Denmark - Jutland
    the S-plug will do a better job.
    #14
  15. Wlfman

    Wlfman Long timer

    Joined:
    Sep 6, 2011
    Oddometer:
    1,294
    Location:
    TN/AL
    I sent an email to them asking why and if they were replacing them with a similar version.

    Their reply
    #15
  16. slowinfastout

    slowinfastout Just Ridin' By....

    Joined:
    Jan 10, 2007
    Oddometer:
    1,942
    Location:
    Fairfax Station VA
    You may think ER6i's are THE ANSWER and they're OK, but once you try custom molded earbuds you will never go back to off-the-shelf. There is a reason people pay $ 350 and up for custom ones, because they are truely all-day comfortable under the helmet and made stronger as well. I've had great luck with these, its all I ride with now:

    http://bigearinc.com/Products/BE-1C.aspx


    FYI, I've never know anyone to regret spending the coin on these.
    #16
  17. tedder

    tedder irregular

    Joined:
    Jun 8, 2004
    Oddometer:
    8,800
    Location:
    Portland
    My wife was unimpressed. But true, most people prefer them.

    OTOH, for daily commuting? Even Etymotics are too much.
    #17
  18. John Smallberries

    John Smallberries Long timer

    Joined:
    Aug 31, 2009
    Oddometer:
    1,350
    Location:
    Northville, Michigan
    I got the same response, word for word!
    #18
  19. nytrashman

    nytrashman old and in the way

    Joined:
    Mar 5, 2007
    Oddometer:
    596
    Location:
    westchester co. NY

    BigEar are rebranded Westone earphones. since i have a Westone dealer 5 min from my house i went there instead of ordering from BigEar.
    #19
  20. levain

    levain STILL Jim Williams

    Joined:
    Oct 29, 2005
    Oddometer:
    7,720
    Location:
    Providence, RI
    Really? How do you know this? Which Westone are the BE-1C?
    #20