For those of you wondering about the flexx bars here's an idea of the difference between them and the stock bars on our 990. These are P/N FL-1003_12-31 http://www.fasstco.com/shop/flexx-handlebars-mx I'm 6' 2" tall with a 32" inseam so you'll know what you're seeing and I also have the BRP/Scotts setup with HDB hand guards and fitment is no problem. In the following two pics take note of my hand and you'll see no movement and no stress on my forearm from sitting to standing.....feels real good. Pics Courtesy of the Queen! One of the things I didn't know was that you can actually shim the Bar ends behind the bushings to raise the bars higher if needed (per their instructions). Cant wait to test them!