Separate names with a comma.
Discussion in 'Vendors' started by theantipaul, Feb 1, 2013.
Get with Paul!! are you wanting a stem mount or triple clamp mount?
Stem, I'm not a fan of the triple look.
This is what I have been considering doing to my KTM 640 that has the Enduro headlight on it now. Although mine would be a little simpler as I do not need a roadbook holder......just the tower to hold lights/speedo dash combo/and possibly my GPS.
What lights have you used for this?
Why are the lights so far forward? Is it clearance issues or is it just the photo's that make it look that way?
I did correspond with Paul about making brackets for my bike, but he was busy at the time and I just let things fall by the wayside.......It's probably going to be a "next winter" project.
Thanks for posting the photos.
Thanks for posting the pics! Looks great.
+1 to questions
Another DRZ rider here that would love one of these. Great deal for that price!
Thanks for all the answers and what you have done makes more sense knowing why!
Was it Paul that made the Nav tower for you??
I do have his handguards,so I know the quality of workmanship.
Thanks again for the info!
I purchased the fairings from Paul. My bike already had the stem mounted subframe.
Sorry for the absence guys, we've been hammered with guard orders and are barely keeping up right now.
The production versions of the 106 and 100mm towers will be finished up next week with any luck, and then I'll try and get them on the site. Then I can look at a 96mm for the DRZ's, so hang in the Hamilton.
Ben, you've been busy, thanks for the lead on the VisionX LED's.
I've been looking at a frame mounted production version, but not sure if I want to make a bolt on or force guys to weld frame mounts and I know this might be stepping out for most guys, but they'll most likely be HDPE. It's down the road a bit, but we have proto's out there being tested.
Another version in testing,
Now I've seen everything...
Anything you make I will stand behind, and buy... So when you get around to it you can count on at least one sale, ha ha. Hdpe sounds great to me. The only thing about welding, I would like to see an alignment system built in. Otherwise I think bolt on for most of us is just fine. Love your guys work, keep it up!
I see Vision X offers a range of beam spreads from 10-60 degrees.
Which Vision X lights did you get, the reflectors on yours look different? Have you tested them at night yet?
These may be a viable alternative to the Squadron lights?
one is a 60 degree and the other a 10 degree.
MORe!!! than adequate for nightime!!!
Asked the same about the vision x.. The reflectors are big on those. I would expect it should have some pretty serious throw.
Paul, stuff is looking great. The hdpe is pretty good I think and cheap to replace. I have been using it successfully with some pretty high speed. A get off that does damage to the hdpe is also more than likely going to bend up some aluminum...
Great info about the lights! I take it you are happy with that combination . Did you give any thought to using 60 and 20 degree lights? Does the combination you are using fill in the middle distance as well?
I actually thought about going with a 10 and a 40.... the 10 is WONDERFUL! and the 60 is great and brighter than my jeeps low beam. Only reason behind wanting a 40 is that I don't plan on any low speed riding. which the 60 is great for.
60 / 10 combo however has plenty and no gaps
you know what?
hold that thought... be back within a few minutes with some night shots....
let me finish my dinner