Help with 276C Touratech Mount

Discussion in 'Mapping & Navigation' started by boatanchor, Feb 14, 2010.

  1. boatanchor

    boatanchor boat anchor

    Joined:
    Nov 28, 2006
    Oddometer:
    40
    Location:
    North East of Hooterville
    I just purchased a standard (Non-Locking) Touratech Mount for my 276C.

    The new handlebars I just purchased for my DR650 do not have the crossmember and I am trying to find a RAM mount adapter plate that will fit the back of the Touratech mount using the four bolts that come with the Touratech unit. The old RAM mounting plate (Model No. RAM-B-202-G2U) I used on the marine cradle does not fit the new Touratech mount. Does anyone know the RAM part number that will fit the back of the Touratech mount? I looked at the drawings on the RAM web site but they did not show anything that would fit.

    TIA

    BA
    #1
  2. Drif10

    Drif10 Accredited Jackass

    Joined:
    Jun 12, 2003
    Oddometer:
    46,761
    Location:
    Gates of Moscow
    #2
  3. Steve W

    Steve W Old Grouch

    Joined:
    Apr 28, 2008
    Oddometer:
    673
    Location:
    Rocky Mountains of Alberta
    A standard Ram "diamond plate" will work if you use only two bolts and position the plate on the diagonal.
    #3
  4. boatanchor

    boatanchor boat anchor

    Joined:
    Nov 28, 2006
    Oddometer:
    40
    Location:
    North East of Hooterville
    Steve W,

    Thanks for the suggestion...I had a diamond plate on the bottom of the mount for my emap and took off...low and behold it fit the Touratech mounting holes if you mounted it straight up and down...

    I am good to go...

    BA
    #4