I have a five month old 50W Morimoto ballast direct wired to the battery with 14AWG wire and a Panasonic micro relay on a 10 second time delay. So the ballast is never powered on until the bike (990SMT) is fast idling and the ADVmonster voltmeter is displaying 14.4VDC. The ballast is fused at 10A and has never blown the fuse. On three occasions, the last two occurring in the past week, the bike has stalled at the moment the relay comes on. Both the bike and ballast restart immediately without issue. The bike is ridden to work daily. Battery is 12.6-12.7 when the key is turned and the voltmeter displays 14.4V at all RPMs 2k and above. Any ideas as to why this is happening? Am I at risk of damaging anything if I ignore it?