fatgut Thanks for the pictures. It looks like you had to relieve the gussets to clear some dirtbagz mounts. I will probably try to position my gussets so that they just clear the dirtbagz mounts. You could cut off those tabs that are sticking out because they don't really help much to strengthen the part. I am also thinking that I am going to cut off the rear exhaust mount and gusset all the way to the down tube of the subframe on the left side. The exhaust mount is broken anyway and all that I have to do is drill a hole in the right position when done. I have ordered from McMaster before, but I did not realize that they had metal stock. They have pretty much every thing don't they. Onlinemetals is cheaper but I think they might make up for it on the shipping. It was a litttle more than I thought it should be for two pieces of metal. I also bought some 1/8 inch stock to do the battery box because it is fubared. One quick question. Are those fingers supposed to point pretty much straight back? One of mine is broken off and the other is bent in a little I guess due to the increased stress.