Jetting kit. Recognise it?

Discussion in 'Crazy-Awesome almost Dakar racers (950/990cc)' started by rossguzzi, Jan 7, 2013.

  1. rossguzzi

    rossguzzi 990 Adv.

    Joined:
    Oct 21, 2012
    Oddometer:
    1,556
    Location:
    Bottom left hand side of OZ
    I just got the CPR Rottweiler air filter from Two Moto Kiwis (thanks by the way!)

    I am trying to identify the needles I got with it. There are no markings I can see. My eyes arnt the best I admit so there could be markings somewhere.

    With it I got 2x45, 2x56, 178, 180 jets. Clips are on the middle setting on needles.

    I guess the 180 goes on the rear and I think it would be ok to just fit them and go, But I would really like to know what needles I have.

    There is a steep step down about 5mm under the last groove, then a smooth taper to the end. Anyone recognise them?

    I should add its going on a 03 950 Adventure. At sea level, would this set up suit? It has KTM performance pipes. Not quite as free flowing as say Akrapovic I would say.
    Cheers
    #1
  2. Two Moto Kiwis

    Two Moto Kiwis Homeless Somewhere

    Joined:
    Apr 12, 2007
    Oddometer:
    4,220
    Location:
    Wanaka, New Zealand, ....What Trip!!!
    Pinged you a PM as well Ross.

    Adventure Machines is the kit, at least at sea level you will get full bang for buck :D

    You have,

    2x45 = Primaries

    2x56 = Air, Bleeds

    178 = Front Main let

    180 = Rear Main jet

    Clips are on the middle setting on needles, that is the position when we took them out at that first and the bike ran well (for the 35 mile I rode it).

    Hope this helps mate, that is my total knowledge on the kit. :clap
    #2
  3. rossguzzi

    rossguzzi 990 Adv.

    Joined:
    Oct 21, 2012
    Oddometer:
    1,556
    Location:
    Bottom left hand side of OZ
    Great stuff. Going to install today. 40c temp so will see.
    #3
  4. ciedema

    ciedema мотоциклист

    Joined:
    Oct 14, 2007
    Oddometer:
    2,160
    Location:
    Brisbane
    Blah. I will home in a couple of weeks, not looking to the heat - Phoenix has been quite nice. (Even with Kiwis)
    #4
  5. rossguzzi

    rossguzzi 990 Adv.

    Joined:
    Oct 21, 2012
    Oddometer:
    1,556
    Location:
    Bottom left hand side of OZ
    Half Oztrailer burning, its sooo hot !


    Fitted the air kit and jets. Goes well. Better test ride tomorrow, only 30c. :)
    #5
  6. TcRulz

    TcRulz Been here awhile

    Joined:
    Dec 25, 2010
    Oddometer:
    289
    Location:
    Home of all things fridgid - Bathurst.
    :lurk So how did it go? You've probably got 'Factory Pro' needles.
    #6
  7. rossguzzi

    rossguzzi 990 Adv.

    Joined:
    Oct 21, 2012
    Oddometer:
    1,556
    Location:
    Bottom left hand side of OZ
    Made by Adventure Machines I am told.
    Didnt get to ride it yesterday, did the steering head bearings. Will ride today.
    #7