Hello, EDIT: 18 JAN 2016 - ALL Rally Raid UK components sold off as a packaged kit. Moving onwards/upwards - see p5. for updates. I know about the big 690 thread, but I didn't want the specifics of this project to get lost in that thread's wide breadth. Plus, there's already a somewhat parallel "Evo 2 kit " thread .... Finally, I'm sure I'll have a number of questions on the Evo 1 build that may be of some help to others in this boat. Or not - maybe I'm the furthest back in the short bus .... Purchased thus far from the good folks at Rally Raid: RR EVO 1 tank kit (for a 2009 ER). RR Adventure Fairing kit Scotts damper unit (#RRP031) http://www.rally-raidproducts.co.uk...cessories/ktm-690-scott-ohlin-steering-damper Scotts damper kit (#RRP020) http://www.rally-raidproducts.co.uk/ktm-690-enduro-steering-damper-kit Another data point - currently have OEM Renthal bars, no risers. Now to what else I need. Not realising the RRP020 didn't come with a submount, and bearing in mind the intended setup, it looks like I need a submount of some sort, no? Assuming that I should have added this to my order: http://www.rally-raidproducts.co.uk/ktm-scotts-mount-kit-08 Is this the correct part I need - and/or is there an alternate part? Does this remove the need for risers? Seems that sitting above the bar, the risers aren't a factor any more - though I'm wondering if with this kit, the handlebar cross bar will interfer with the damper (vertical spacing)? I'm short (5' 7"), so I'm looking at the bar risers only if required to fit the damper - am otherwise happy with the the position. Would love to start with my tank and fairing install, but I appear to be "stuck" with affixing the damper on the bars .... Thanks! CM PS - if anyone has a submount for sale that will work on my bike and damper (and not interfere with the RR Evo 1 tanks/fairings), that would be great.