With lots of discussion and development, finally, a mounting option for Rotopax containers has been developed for the stock KTM 950/990 Adventure pannier racks. This is the rack system these are designed for Mounting plates are built using 3/16" 5052-H32 aluminum, in raw finish. Bolts have been recessed as the photo above shows Mounting design has been fully tested in Moab with full fuel containers Can be used with dry bags Mounting hardware *a note on the mounting hardware* Mounting hardware is quality stainless steel used with a locking nut. (wont rust) I believe this is a superior design ready for abuse. It seems there is a slight difference between the 990/950 H&B pannier rack. The top bolt touches the rear fairing slightly on a 950. To me this is not an issue, to others it might. A smaller bolt would solve the issue.. I will leave that to the discretion of the buyer. Current inventory ready to ship Pricing US freight: $53/ea delivered via USPS $93/pair delivered via USPS International shipping: $81/ea delivered flat rate USPS $121/pair delivered flat rate USPS Please contact me for my paypal address.