Separate names with a comma.
Discussion in 'Pacific Northwet - Where it's green. And wet.' started by DantesDame, Aug 25, 2008.
Purple frame paint...no extra charge.
Stock KTM 690 Enduro seat that has been recovered for sale. It has 2 small holes in it.
$100 plus shipping.
I have had this heavy duty Peerless universal TV stand in storage for far too long.
It's universal arms will accept up to a 400x400mm bolt patern, common for most large flat screens. It swivels side to side, it pivots up 15* and down 5*. It cost many hundreds several years ago. It is dirty, but in good condition overall. For this price, you can clean it!
It is heavy, so falling over with a bump is likely not gonna happen,
.....nor is me shipping it from Hood River....
So come get it, bring a bottle of whiskey. Not really that picky.
I figure it's worth a half gallon of Even Williams Green Label,
or a fifth of something better. Whatever
Front forks from a 2001 DRZ400S. Forks had 2,000 miles on them when removed and seals were not leaking (this was about 1 year ago). I know that these are not the "desirable" forks....hence the price. Located in Albany but I frequent the Portland (Tigard) area so delivery may be possible. They aren't worth shipping.
Not desirable why?
Would obviously be an improvement over stock old KLR but is the travel short or something?
I have the rear seat, seat belts and all hardware for sale. Make an offer! I need the cash and it is taking up space. I took the seat out when new. My dogs needed the space.
Pick up in Seattle or delivered nearby.
They are not desirable compared to other DRZ years (2002 and up) due to lack of rebound adjustment and softer springs. There may be other reasons but that is all I know.
****Correction Helmet size is extra small*****
Sorry for the confusion.
Cool little bobber or brat bike. Runs nice, not so loud but still a little throaty. Has about 22,000 miles on it. Couple different seats, the Hypercharger isn't on it anymore but I still have it. I have a lower set of shocks, some taller bar risers, tank lift kit, lower shocks and a sissy bar just sitting on the shelf to go with it.
Bike is near Bellingham, WA
$3500 or trade for a dual-sport that's at least semi-modern. I've just purchased a Ulysses so my Harley box is still (sort of) checked.
So, I just found out today that I've got a busted spoke on my 2007 Yamaha YZ450F.
I figured no big deal, I'll just run down and get a new one--or maybe a set.
Well, no. I guess not.
DNA wheels use fatter-than-OEM spokes.
Does anyone know where I could find spokes?
Lynnwood Motoplex told me they don't have the Excel spokes that might be fat enough without special order, Adventure Motosports here in Monroe had nothing, Ride in Woodinville can suck a left fucking nut (no, they don't have it either). Smokey Point is doing research.
Who else can I call? I'm running out of time that I can react!
Does anyone have any spokes for a ~2000+ YZ/WR with aftermarket wheels? Anything? Anyone?
Give Pro Wheel in Granite Falls a call, they build al kinds of aftermarket wheels. 360-691-6459
I just picked up a pair of these at the Cabelas in Post Falls, ID. They are tagged Cabelas but are made by Girbing. Normally sell for $200; I got mine new in box for just over $80.
So if you are looking for a nice set of battery powered heated gloves and a phenomenal price, that is the place to go.
And no, I don't work for Cabelas.
Woody's wheels in denver
Good price if they're Gerbing
Delta Bandsaw - 14" (vintage - 1945) -- $500
Fresh tune-up with new tires, bearings, belt and guides.
Lots of rare parts: Welded stand, casters, belt guard, original pull rod start lever
I have a pile o' parts for XR600 and/or XL600 - as pictured. This is 1985-87 stuff.. Make offer on any or all. Just taking up space. PM for more info.
cylinder head xl damaged - 3 good valves.
tripletree top xr
brake caliper and hose xl
choke lever and cable xl
cam sprocket xl/xr ?
engine mounting bolts xl and/or xr
brake (foot) lever xl ?
wrist pin xr - (scored)
manifold spacer gasket xl/xr
triple tree top nuts probably xl but not sure... (these are gone as of 3/20/2014 - payed forward)
handlebar clamps xl/xr
timing chain guide xl
front axle clamp xl/xr
wire guide under tank xl ?
muffler to headpipe clamp xl/xr
front wheel speedometer hub xl/xr
weighted bar ends xl
oil line clamp to engine xl/xr
Anyone know where I can pick these up locally (Seattle/Renton/Eastide)?
Plenty of MC shops have the pigtails & alligator clips....but no extensions to be found anywhere.
Make your own?
Those connectors look like the ones I bought at NAPA.
Well duh, why didn't I think of that?
Connectors & lamp cord..... and I even get to make custom lengths & colors!
Would still like to know, though -- any ready-mades available anywhere?
Franklin RTP series steerhide with inner deer liner baseball/softball glove. 14" right hand thrower. Like new condition. Over a $100 new. Comes with a can of Franklin Dr. Glove conditioner. Both items $50:
Wilson Air Hammer 9.9 Raquetball Raquet (Cliff Swain model.) Maybe used twice. Oversized head. A real power raquet. $60 and I will throw in the older Leach brand graphite performer raquet for free. The Wilson was a couple hundred bucks alone: