R1200 Front Axle Tool and Spark Plug Cap Tool Combination

Discussion in 'Vendors' started by Promach 1, Jan 30, 2011.

  1. Promach 1

    Promach 1 Promach 1

    Joined:
    Mar 9, 2007
    Oddometer:
    232
    Location:
    NW Montana, Flathead valley
    This is a hex tool made out of 7075-T6, aircraft grade aluminum for the front wheel and a spark plug cap removal tool. The hex tool will also fit the the plastic oil cap. These tools fit together with an o-ring around the hex tool, to give it a friction fit inside of the spark plug tool. It's 1.5" long and 1.25" in diameter, and only weighs 1.8 ounces. The hex tool has been tested to 100 ft. lbs of tourqe, with no distortion. This is over twice the amount of tourqe needed for the GS/RT wheel.

    Our tools will fit all of the R1200 series, including the new Wet Heads

    You can also buy the Spark Plug tool and the Hex tool separately.

    The Hex Tool will also fit the Suzuki DL1000 Vee Strom.

    For more infomation please visit our website @: www.promachdualtool.com
    Don't forget to "Like" our Facebook Page: https://www.facebook.com/PromachDualTool
    Also check out our YouTube video @ http://www.youtube.com/watch?v=g7TatOp_37U
    :deal

    Attached Files:

    #1
  2. chiba

    chiba elitist BMW snob

    Joined:
    Aug 27, 2007
    Oddometer:
    1,182
    Location:
    Fairfax VA
    I have one of these & have to say it's pretty damn cool.

    --chiba
    #2
  3. kjackson

    kjackson It's just me...

    Joined:
    Oct 26, 2005
    Oddometer:
    192
    Location:
    Northern Virginia
    Saw Chiba's Dual tool at a local club Tech Day and thought it was a pretty ingenious piece of kit. I have separate tools that do the job(s) of the Dual Tool just fine, but are not nearly as compact and travel friendly. They will stay on the shop shelf and the Dual Tool will be a welcome addition to my tool roll.

    Paypal sent.

    Thanks
    #3
  4. Promach 1

    Promach 1 Promach 1

    Joined:
    Mar 9, 2007
    Oddometer:
    232
    Location:
    NW Montana, Flathead valley
    We have sold this tool to several people that wanted something more compact and lighter than what they had.
    We appreciate all feedback.
    Ride Safely
    Promach 1
    #4
  5. mr. matteeanne

    mr. matteeanne Bender can pass him

    Joined:
    May 24, 2004
    Oddometer:
    14,484
    Location:
    Dualsport Paradise, Olympics
    Bump?

    Sent from my DROIDX using Tapatalk
    #5
  6. Rock712

    Rock712 Baron Von Crashy

    Joined:
    May 16, 2007
    Oddometer:
    119
    Location:
    NY
    just ordered one...
    #6
  7. Beermonster

    Beermonster Adventurer

    Joined:
    Aug 8, 2006
    Oddometer:
    22
    Location:
    North West, England.
    Do you ship to the UK?

    Simon
    #7
  8. Promach 1

    Promach 1 Promach 1

    Joined:
    Mar 9, 2007
    Oddometer:
    232
    Location:
    NW Montana, Flathead valley
    Thank you for your order. It looks like the season is picking up and the orders are starting to come in. Thank you to all the others that have given us the high marks.
    Ride Safely
    Promach 1
    #8
  9. deeve

    deeve DumbA$$

    Joined:
    Jul 10, 2010
    Oddometer:
    1,404
    Location:
    Hillsboro, OR
    My wife just gave me both tools for my birthday. Very well made! Tried the spark plug tool and it worked great. I haven't actually used the wheel tool, but the fit into the hex was really nice and it looks pretty sharp.

    Thanks!
    DAVE
    #9
  10. Promach 1

    Promach 1 Promach 1

    Joined:
    Mar 9, 2007
    Oddometer:
    232
    Location:
    NW Montana, Flathead valley
    Thank you for your feedback and thank your wife too! They have been selling like hot cakes and no complaints. Have a really good and safe riding season. :freaky
    #10
  11. Promach 1

    Promach 1 Promach 1

    Joined:
    Mar 9, 2007
    Oddometer:
    232
    Location:
    NW Montana, Flathead valley
    So far, we ship just about anywhere.
    #11
  12. leeinmemphis

    leeinmemphis Long timer

    Joined:
    Jan 6, 2002
    Oddometer:
    1,242
    Location:
    Memphis, Tn.
    just placed an order. Do you know if the spark plug removal tool will work on an 1150 also by chance? Thanks!
    #12
  13. GB

    GB . Administrator

    Joined:
    Aug 16, 2002
    Oddometer:
    57,328
    Location:
    Toronto
    You get one thread in Vendors to sell your tools.. please don't start a third.. merged your threads together.
    #13
  14. Promach 1

    Promach 1 Promach 1

    Joined:
    Mar 9, 2007
    Oddometer:
    232
    Location:
    NW Montana, Flathead valley
    Sorry about that. I didn't know, and it won't happen again.
    #14
  15. Promach 1

    Promach 1 Promach 1

    Joined:
    Mar 9, 2007
    Oddometer:
    232
    Location:
    NW Montana, Flathead valley
    I don't know if it will or not. Please let me know if you find out.
    Thank you for your order.
    #15
  16. chiba

    chiba elitist BMW snob

    Joined:
    Aug 27, 2007
    Oddometer:
    1,182
    Location:
    Fairfax VA
    It will not work on the front axle of R1100 or R1150 generation bikes. You need a box-end wrench or a socket (17mm IIRC but it could be bigger) for that.

    --chiba
    #16
  17. leeinmemphis

    leeinmemphis Long timer

    Joined:
    Jan 6, 2002
    Oddometer:
    1,242
    Location:
    Memphis, Tn.
    I'll try it to see. I know the wheel tool won't work because the 1150rt doesn't need a special tool. I am hoping that the spark plug removal will work for both. I'll give it a shot and post back what I find out. Thanks.
    #17
  18. drbike

    drbike Been here awhile

    Joined:
    Apr 30, 2007
    Oddometer:
    269
    Location:
    North West BC
    Just received the tool today. Nice workmanship, almost hate to use it, its like a jewel. The lady at the post office actually wanted to touch it :D, not my tool your tool! Truly a thing of beauty, thanks.

    Paul
    #18
  19. IronGoat

    IronGoat Adventurer

    Joined:
    Mar 26, 2010
    Oddometer:
    71
    Location:
    Mountain ON
    Just ordered one so I can get my wheel off! Need a new tire and I don't want to pay someone to do something I can do. Plug cap tool is a bonus.

    Make it happen Promach! Thx.
    #19
  20. Reverse

    Reverse Armchair Tough

    Joined:
    May 8, 2008
    Oddometer:
    1,268
    Location:
    Atlanta, GA
    Ordered a few days ago. No problems.
    #20