Rock Hard Rally Gear. KTM LC4 and LC8 rally bash plates. (Australia)

Discussion in 'Vendors' started by KTMatt, Oct 21, 2006.

  1. KTMatt

    KTMatt Been here awhile

    Joined:
    Sep 11, 2006
    Oddometer:
    850
    Location:
    Wollongong NSW Australia
    More pics

    [​IMG]

    [​IMG]

    [​IMG]

    Cheers Matt
    #81
  2. KTMatt

    KTMatt Been here awhile

    Joined:
    Sep 11, 2006
    Oddometer:
    850
    Location:
    Wollongong NSW Australia
    The LC8 bash plates now comes with three mounting points if you need them.

    The 950 SE mounts to the oil tank , motor & rear frame

    [​IMG]

    And the Adv. also picks up the bottom engine mount if you want it.

    [​IMG]

    Cheers Matt
    #82
  3. GodSilla

    GodSilla I did that.

    Joined:
    Sep 21, 2006
    Oddometer:
    8,674
    Location:
    Downtown S.E. NSW
    I put a few holes in mine, it was the only way to control heat for me. Constant speeds, no problem, but tight trails or even worse, slow climbs, and my bike was cooking. Once I put a few strategically placed holes in it, no worries, I suspect the 640 just needed some airflow at lower speeds past the cases to remove excess heat. I can't vouch for others though, that was my own specific fix.
    I have field tested the bashplate and it works, I still have a right foot with no broken bones.:thumb
    #83
  4. Nicolasleon

    Nicolasleon Gnarly F5er

    Joined:
    Aug 27, 2009
    Oddometer:
    225
    Location:
    Chile - currently in Brisbane
    Hi Matt, i PM'd you... cheers!

    Could you please post a picture from the front of the 640 adv with the bash guard mounted?:lurk
    #84
  5. GiMoto Canada

    GiMoto Canada KTM Submarine Capt.

    Joined:
    Aug 25, 2007
    Oddometer:
    50
    Location:
    Great White North
    Another PM - 690 Plate required!
    #85
  6. ktm950se

    ktm950se Banned

    Joined:
    Jan 7, 2007
    Oddometer:
    1,385
    Location:
    Southern Maine
    That's a GREAT looking SE skidplate, and the best mounting set-up I've seen short of a full-blown Powercell-type conversion! :thumb

    ktm950se
    #86
  7. KTMatt

    KTMatt Been here awhile

    Joined:
    Sep 11, 2006
    Oddometer:
    850
    Location:
    Wollongong NSW Australia
    Thanks :D

    Whats a full-blown Powercell-type conversion ?

    Cheers Matt
    #87
  8. ktm950se

    ktm950se Banned

    Joined:
    Jan 7, 2007
    Oddometer:
    1,385
    Location:
    Southern Maine
    #88
  9. KTMatt

    KTMatt Been here awhile

    Joined:
    Sep 11, 2006
    Oddometer:
    850
    Location:
    Wollongong NSW Australia
    I was just looking at that thread and its a good move relocating the oil tank as its in a stupid place down the front waiting to get ripped off.
    #89
  10. mcguyver

    mcguyver Long timer

    Joined:
    Dec 24, 2005
    Oddometer:
    1,433
    Location:
    BRISBANE AUSTRALIA
    Hi matt
    I just picked a rock had rally bash plate for my 640 off one of the aussie inmates.
    What a brilliant peice of kit.

    Just wondering if you have considered another method of securing the lids I will probably change them to wings nuts for ease of access. seems a bit odd to me that you need to carry an 8mm to get into your tools in the tool box.

    Perhaps some zeuss fasterners would work as well.

    I know it comprimise security but it would be much easier.
    #90
  11. KTMatt

    KTMatt Been here awhile

    Joined:
    Sep 11, 2006
    Oddometer:
    850
    Location:
    Wollongong NSW Australia
    KTM 990 Adv with a GPR 2 into 1 system

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
    #91
  12. dino2000

    dino2000 No Bad Daze

    Joined:
    Dec 18, 2003
    Oddometer:
    1,352
    Location:
    Sacramento,Ca.
    how much for SE? BTW: those things are BITCHIN'!
    #92
  13. KTMatt

    KTMatt Been here awhile

    Joined:
    Sep 11, 2006
    Oddometer:
    850
    Location:
    Wollongong NSW Australia
    PM sent with all the details.

    Cheers Matt
    #93
  14. Vicks

    Vicks gets stuck in sand

    Joined:
    Oct 4, 2006
    Oddometer:
    3,308
    Location:
    Abu Dhabi, UAE
    Hi Matt,

    How much does one of your fine bash plates for the '07 990Adv cost me ?

    cheers
    #94
  15. KTMatt

    KTMatt Been here awhile

    Joined:
    Sep 11, 2006
    Oddometer:
    850
    Location:
    Wollongong NSW Australia
    Hi Vicks,

    Ill send a PM with all the details.

    Cheers Matt
    #95
  16. blackcap

    blackcap Been here awhile

    Joined:
    Jul 21, 2008
    Oddometer:
    565
    Location:
    Wollongong aka stink-town, Australia
    Hey Matt,

    did you ever manage to put something together for the DR650?
    #96
  17. KTMatt

    KTMatt Been here awhile

    Joined:
    Sep 11, 2006
    Oddometer:
    850
    Location:
    Wollongong NSW Australia
    Ill have something soon , Ive got to get my cuz's bike and Im going to do the bash plate and a set of rear tanks that you strap the soft panniers onto so theres no need for racks. Ill be fitting up a vacum pump to it as well so it can pump the fuel up to the carb.

    Ive made a new tank for my 640 thats bolts onto RHS and holds 15.5L just got to get around to making one for the left side now.

    Ill post up some pic's soon.

    Cheers Matt
    #97
  18. Brown Dog

    Brown Dog North Georgia Dual Sportr

    Joined:
    Nov 16, 2008
    Oddometer:
    1,997
    Location:
    Calhoun, GA. USA
    You got a pic of this one mounted on the 950 Super Enduro ?? :ear


    #98
  19. KTMatt

    KTMatt Been here awhile

    Joined:
    Sep 11, 2006
    Oddometer:
    850
    Location:
    Wollongong NSW Australia
    Hear you go Brown Dog

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    And the powder coated version.

    [​IMG]

    I hop that helps

    Cheers Matt
    #99
  20. Brown Dog

    Brown Dog North Georgia Dual Sportr

    Joined:
    Nov 16, 2008
    Oddometer:
    1,997
    Location:
    Calhoun, GA. USA
    Thanks Matt.
    Me ONLY likes the Natural Aluminum color :thumb
    NICE :eek1