Waterproof BMW Hall plates (HES plates)

Discussion in 'Vendors' started by Dan Cãta, Feb 10, 2013.

  1. Dan Cãta

    Dan Cãta Long timer

    Joined:
    Jun 5, 2008
    Oddometer:
    1,697
    Location:
    Cluj, Romania
    Hi all,

    Because almost all of the BMW R 850/1100/1150 bikes suffer because of a HES (Hall effect sensors) plate failure, I cam up with this design that will never fail again, meaning that you will never get stranded because of this. You can pressure wash the bike all you want or ride in the rain, after fitting this part. For GS riders, river crossing will never be a problem, unless you allow water inside the engine [​IMG]

    The price for an unit is 220$ , shipping is included, worldwide, and the warranty for this part is the lifetime of the bike. It replaces the 12112306137 and 12117673277 OEM code parts from BMW. For the 1150 bikes, it's a direct swap. Unfortunately, for the 1100 and pre-1999 bikes, I have not been able to find the right connector for the bike's harness, so you will have to solder the wires to your failed plate connector. For this reason, the price is a little lower.

    Here's a video of it working:

    <iframe src="http://www.youtube.com/embed/zknga56N19c" allowfullscreen="" frameborder="0" height="315" width="420"></iframe>

    For purchases, please go to my webstore: http://boxer-upgrades.webs.com/apps/webstore/products/show/3693164

    Thanks,
    Dan.
    #1
  2. twinrider

    twinrider pass the catnip

    Joined:
    Aug 20, 2002
    Oddometer:
    9,620
    Location:
    日本
    Both my 1100GS and 1100RT's Hall sensors bit the dust, wish this had been around back then. Bump!
    #2
  3. Dan Cãta

    Dan Cãta Long timer

    Joined:
    Jun 5, 2008
    Oddometer:
    1,697
    Location:
    Cluj, Romania
    I have updated the price on these. Was 270$, now it's 220$

    Dan.
    #3