SOLD 2014 DR with multiple, trouble-free trips throughout the northeast under its belt. Not a garage queen (expect marks on the body, etc.) but not abused and well maintained. Just under 20,900 miles. Located in Millerton, NY - near the CT/MA borders. $3400 Second owner. It came to me stock @4500 miles plus the Minuki TM40 Pumper carb, Seat Concepts seat cover, a stainless steel head pipe, and FMF exhaust. Full disclosure: Purchased as a 2011. At @10,400 accident resulted in an ovalized head tube on that frame. Rebuilt on the current 2014 frame (sourced from an Inmate - thanks!) and replaced forks, front wheel, steering tube. No issues since rebuild. NOT a salvage or rebuilt title. Full, clear title registered with 2014 frame's VIN. Willing to provide the VIN to interested parties. Add-ons, • RaceTech emulators, progressive springs, and heavier weight oil in the forks • RaceTech Gold Valve kit and heavier weight spring for the rear shock • Skaggs rear rack • Acerbis 5.1 gallon with locking cap • full LED lighting (with correct diode, flasher, etc.) plus custom round headlight (I no longer have the original fairing and headlight) • back-end cleaned up • lowered footpeg mounts and Fastways Evo4’s • Leo Vince X3 replaced the FMF pipe (requires no repacking) • Shorai lithium battery and Shorai charger • ProTaper CR High 1 1/8” bar & ProTaper risers • ProTaper clutch lever and Barrett HD springs • BikeMaster heated grips with voltmeter (this always reads 0.3-0.4v lower at the grips that when measured at the battery - fyi) • custom side racks (made in Vermont) • aluminum skid plate • stainless brake lines front and rear • Moose hand guards • RAM mount mirrors • relocated dash lights • magnetic oil drain bolt And, trying out a Seat Concepts rally height foam and cover (not fully installed) which you see in the photos. So you have your choice between the high seat and the standard height seat foam and cover, which I still have. Or take both +$75. Maintenance, • oil changes every 2500 miles • NSU screws safety wired • recent valve check within spec • @16k miles, all bearings greased, • front and rear wheel sealed bearings replaced, • clutch inspected (all good), • Cush rubbers replaced, • new brake fluid, • and NGK plugs • new UNI air filter this spring Needs, • rubber, front and rear Additional, Will come with several oil filters, grill-type headlight protector (for that Steve McQueen look), and small box with other bits. I have Wolfman waterproof pannier bags in good shape that fit the racks. 38L total. Selling for $200 separately. Will sell with the bike for $125. Also have new, uninstalled Warp9 rear rotor, oversized 320mm Warp9 front rotor and adapter purchased in the fall from Procycle for $200 with the bike (valued at $300). Not interested in trades. Looking for a COVID-safe transaction.