This is my wife's bike , and we tour a lot before the plandemic . A tip the stand in the video was a Rally model stand ordered from my dealer . The GT pro stand is a little shorter than the pro stand , and may not require the work seen in the video . However it does not get much easier to get a bike on the stand than this . Since this video tuning the bikes setup for my wife I lowered the front forks 5 mm to make the bike turn in a bit quicker as she missed that feel from her Suzuki Bandit . After the 5 mm change up front this places the rear tire an additional 1/4 " off the ground . so a 1x4 would never be needed now . I've included a picture of it off the ground 8.5" before being cut down . I've performed this on many bikes from C14's to bandits Enjoy .