Ajp pr7

I think it was removed from previous owner, not sure why, probably just forgot to replace, but still, one wouldn't think that Husky/SWM and even AJP dealers I contacted had a mind fart about this, well, when that happens then you just make your own! There are aftermarket ones but $50 for a small piece of flat stock with 2 holes? Gimme a break!

Try this guys

Thats cool tbucket, but still $65(coz I live in Mexico), but saved the site for SWM parts just in case, Thx a lot

If you want I can order one for you and sent it when I get it. It will be a lot cheaper. I can added to my order in that way so can save on shipping.

Thanks for the offer, but now in process of making one, even with thicker stock, so all is cool, and again thanks for the offer

Some Colorado riding. What an amazing machine

After 5 amazing days of rocky Colorado riding my pipe took a biting. Even the part where the skid plate is got smashed Time to fixed

Yea
I’m kinda wondering about the skid plate
Might have a better one made ( stronger material)
It seems rather thin

Actually the skid plate itself bended the pipe in some spots

Eric, see the plate Nick did for his, gave me a good idea, gonna take to my local welder here and add on, should be cheap, oh got my lights set up, pics soon

Can you send a link ? or pick ?

A good chain guide :)

Has anyone change their clutch and brake levers for two finger ones and if so can they share the part numbers?
Ideally for a 2019-2020 model as i think the levers are different on the original model.
thanks

I could not find a nice lever so changed the controls to 2020 ktm stuff and fitted nice levers

Hey E, did u get this from Chris at ADV ENG? If not looks just like his. Oh, Nick is sending me skidplate pics, will forward

Yes I did

Just curious if anyone here is riding one in Malaysia? There was a display with 5 or 6 PR7s a year or so ago at an enduro race. I asked about them then and a few months later and was told they are here but they couldn't sell them yet because they didn't have final pricing because they didn't have the Malaysian governments tax #'s yet...

@ebrew any chance you got the part numbers to share?
thanks

They are off a 2020 ktm 450
Found as new take offs on eBay

ktm uses dot4 for the clutch so you will need a slave as well ( line is fine )
The brake like is a bit more complicated. The
Brake switch configuration is different and the banjos are different.
Not hard just planning
I did a low fender conversion

@ebrew thanks
I assume that's why you went for a Oberon slave?