Separate names with a comma.
Discussion in 'Thumpers' started by GB, Apr 24, 2008.
Perfect excuse to upgrade to double-takes.
ok help me out........ I have the front fender like yours. What do I need to mount it like yours and what light did you place below stock?
I made my own.
And where would you mount them then ?
If you have hand guards I went to this set up last year works great never moved takes a hit in a fall.
The trick to double take mirrors is to put shrink wrap on the ball parts.
On this next go around I think I will try the Rottrweller set up....
Well, I tend to stay at the "if it isn't broke, don't try and fix it" end of things. Especially if it saves me spending fuel money !
Hi, I have seen this topic on other boards, but with no solution. Has anyone found a replacement for the fuel pressure regulator (FPR) in the petrol tank of the g650x, it looks like the part number is a NH6EG. any help would be nice.
Hi , did you find a good replacemet for the FPR. I have the same problem, any help would be great
Try Quantum Fuel Systems www.hiflowfuel.com. They don't list one for the X but it looks similar to a KTM regulator. Would need to cross reference the pressure rate.
My FPR looked all rusted too. I was able to strip everything clean and re-use it. Still working great.
Hi, I have 2 products:
They gave me a cad drawing for the measurements, Can forward a pdf file if that can help
The other link will not give any info, so if you have better luck tell me.
You need a 3.5 Bar FPR but like @andrewgore did I just cleaned mine I did not like the fuel pump mod so I bought the secondhand one, and then another one, and finally a good one measured at 3.7 bar, but the Fuel pressure kit was a cheap eBay variant so don't know how accurate it was
Closest is this one but I would measure just to confirm the length of the shoulder as this is the only dimension I did not measure in my post https://advrider.com/f/threads/bmw-g650x-challenge-thread-index.335086/page-770#post-33899986
Some others to consider Honda CB500 but the shoulder at the top which I did not measure looks a bit long
Looks like most of the KTM ones will work £26 lots cheaper but check measurements and tell the seller what you want to do which bike it is for and provide measurements to confirm fitment
Hey all. I've been out of the loop a while. I think I was 30 pages behind. Just before the hiatus a gentleman had fabricated and was selling an exhaust shroud for the small gap in the original. Do you have any left by chance?
Calling @Hscarborough for @Kiharaikido
That's me. I've got several left. Shoot me a PM and we'll work it out
Thanks for the page.
Hey guys, probably a dumb question. I found a 650 rotax replacement engine on eBay. It says for a 09 and up, will it work on my 07 xchallenge? I thought these engines were all the same. Thanks
Buy the $900 one or I will.....