Building some custom XR600/650L-based scramblers; an XR600 for my buddy Seanito, a 650L for Hambone, and another XR650L for Grande. Sean wants something sort of like a street-tracker that he can rip around town on, Hambone would like more of a dirt-oriented scrambler, and Robo-Boogie and I are pretty dead-set on turning at least one of these into a longer-distance ADV bike. We might end up buying another one, because Grande and Hambone are going to be cruising together most of the time, so it really makes sense for them to be riding similar bikes. So for now I'm just going to focus on designing and building the parts they'll all share (custom tanks, subframes, seatpans, rear fenders, air boxes, etc.). Have been working on the tank for the last month or so, on and off. Excited about applying what I've learned about working with composites to a big project like this. Would like to hone my skills to the point where I can start designing rally kits and custom parts, so this is really just a learning exercise for me. Still making it up as I go, slowly figuring things out.