Separate names with a comma.
Discussion in 'Thumpers' started by Tagati, Sep 18, 2009.
kinda what i was thinking..... I made him an offer but never heard back.
All seat concepts seats go on a stock pan- the question is, where are you gonna find a used pan for one?
The one that's on the bike would work fine :) Who needs 2 seats?
The TE continues to impress. Shortly after this photo the trail deteriorated into quite technical singletrack, and I managed to get through just fine, though slowly on the big girl. Then on the way home she was happy to roll at 75mph on the highway for a bit. So great.
You know, like this:
last Saturday and Sunday we made a nice tour in Abruzzo in two days for a total of 520 km. we stayed and slept in the splendid refuge of "Rocca Calascio" where some scenes of the movie Ladyhawke were filmed. below are some photos of the participating group. on the second day we also visited a huge wind farm
More photos here
I tore apart some TE510 Marzocchi Shivers & some TE630 (short) Shivers and compared the innards. More details are over on Cafe Husky if you're interested.
joking around with my old TE630 "at the dock"
A further lowering of the lowered saddle. Yesterday I started to lower the saddle further. long ago I had bought a lowered saddle but not yet enough to make me feel good with both feet. my goal is to lower the lowered seat by another 30 mm. there is a soft foam rubber space. I worked the saddle with a hand saw and then with a whisk with sandpaper disc. it will still need some hand finishing before reassembly. in the photo the comparison between the saddles
any advice for other work on the saddle is welcome. thanks
Now i can confirm that swm camshaft is identical to husky. It works just like it used to,and has same power measured at butt dyno... Markings between cam and gear are in different places,so if you need to swap gear from other cam,be prepared to time them in some way.
Clutch springs were allso done,lenght just at service limit. Cheap to replace.
I thought the black and white Voyager was the best solution for the money. I use the GPS speedo and left the stock POS computer hooked up below so the odo would stay correct. I was also concernrd it may need speed for the fuel map. You can see the stock one buried down there. The wind screen is off a Honda.
Looks like it's going to put some serious pressure on the family jewels.
when I tried it I didn't feel uncomfortable with "family jewels". I make road transfers for a few hours so not full days. and in any case I drive 90% of the trip on foot
I have been dreaming for the voyager allso,it seems to have everything needed,but price is pretty steep imported here. My stock meter failed a while ago,and bike felt the same without it. It was cold and raining,so i might be wrong,and it could be in normal mode (if there is fault,ecu returns to stock fueling,and to return custom fueling failure codes needs to be cleared.) I opened meter and cleaned,washed (with electric cleaner) and gave it time to dry,and now it seems to work again.
I took the big girl out for a little motocamping weekend.
Man I envy the places you guys have to ride- I've gotta make my way out there. I'm on the east coast- can't complain a whole lot, though, as we at least do have the blue ridge mountains here and some good off road terrain. Nothing as expansive as yours though. Great pics.
Somebody could probably use this rear rack. https://www.ebay.ca/itm/Touratech-L...031340?hash=item28838211ac:g:s-sAAOSwz-ldXbVU
I put up an extra skid plate I had: https://advrider.com/f/threads/husqvarna-te610-skid-plate.1419382/
Information for my fellow te630 riders, I posted up my used radiators in the fleamarket if anyone needs a spare set.
Also, I will be posting my Arrow Cans later this week. I went back to the stock cans so I can run in stealth mode on the trails. Send me a PM if interested.
Can I get the details of what looks to be a iPad mounted on your bike and that giant windscreen?
The tablet you see in the photos is an 8 "Alcatel 9022x. It is fixed by means of a Ram Mount coupling. The windshield is by GIVI for the Aprilia Pegaso 1992/1996 model very similar to this