Separate names with a comma.
Discussion in 'Vendors' started by OnTheWay, Jun 28, 2015.
What size bolts are required for the camera mounting holes?
Each aluminum billet lens housing has three industry-standard ¼-20 threaded holes on the top, left and right sides
Two L shape brackets with washers and spring plate, bolts included in the package.
Thank OnTheWay...my kit didn't come with those brackets or bolts. Hmmm
We just added these to the package.
Just PM me your name, we can find your address, and will send these to you if need.
I ride a GS Adv in all weather and I just got a K1 kit for Christmas. So now I'm looking for a way to mount the recorder in a waterproof box such as a Pelican case. I was thinking that I could use some waterproof cable glands mounted to the Pelican case but I'm having trouble finding glands that will pass the micro USB plug and still tighten down on the cable.
Good to see to make a Pelican case for DVR, but need to think about heating, DVR generates heat during recording.
Is the heat high enough to be problematic?
I just installed the camera system on a R1200GS. Pretty straightforward. Note that the camera must be mounted in one of two orientations... the cable be up or down. It cannot be mounted sideways, regardless of the mounting holes on the sides.
Here's a detailed review I found online.
Another helpful video
The professional installation made in Taiwan,
Review made by webBikeWorld.
The updated installation instruction sheets,
https://www.dropbox.com/s/qf5pjc3ygdgyn1s/INNOVV K1 INSTALLATION INSTRUCTION-2016 01 13-P1.pdf?dl=0
https://www.dropbox.com/s/u9yby4ojkunhcq8/INNOVV K1 INSTALLATION INSTRUCTION-2016 01 13-P2.pdf?dl=0
The K1 motorcycle camera installed on Triumph explorer xc
INNOVV K1 Motorycle camera-Triumph Explorer xc-01 by INNOVV Moto Cam, on Flickr
INNOVV K1 Motorycle camera-Triumph Explorer xc-02 by INNOVV Moto Cam, on Flickr
INNOVV K1 Motorycle camera-Triumph Explorer xc-03 by INNOVV Moto Cam, on Flickr
INNOVV K1 Motorycle camera-Triumph Explorer xc-04 by INNOVV Moto Cam, on Flickr
INNOVV K1 Motorycle camera-Triumph Explorer xc-05 by INNOVV Moto Cam, on Flickr
I really like the K1 Camera. I have been looking for a system like this for a long time. I use it to monitor the group that I ride with for training purposes. I have a couple of picture of my mounted positions.
This one of my front mounted views
This is the rear mount, under my trunk.
GPS is behind my passenger sit.
On and Off switch is on the tank.
And the HD unit I just mounted inside the trunk for easy access when I need to download my videos.
Thank you for sharing, the installation is great. What bike do you have? and do you have photo after installation?