R 1100/1150 GS/RT/RS/R/S throttle body repair kit

Dan,

Thank you very much for your kit. Great work! TB rattling has gone.

To get old bushings out, I used M10 screw tap.

In the kit (for 1150GS), there are 4 small O-rings - where should they fit? I used two of them on air bypass screws (?).

I have no locknuts (1150GS) on shaft (pulley side) - I used small hex screw and aluminium washer from kit as locknut - but there is small play between pulley and shaft. Any advice how to fix it?

PM sent.

Dan.

Hi Dan,

Can you please send me instructions how to order it. My mail: [email protected]
Would be for the right hand side of a 2000 R1150GS
Shipping will be to the Netherlands

Best regards
Ard

Email sent.

Dan.

Dan,

Thanks a million for your great communication and product. You answered my questions immediatly and shipped the kit to Texas without delay. You also notified me with the shipping information so I could track the order. Your step by step repair instructions on the forum are priceless. I will be sending my HES for rebuild soon and have a friend who will be getting TB kits from you also.

David

Hello Dan,

Can you please email me how much for both sides, shipping to Spain?

The bike R1150GS Adv. 2004 The TB Bing 75/45/109 and 75/45/110

Thanks

I'm in process of buying a kit for the RH side as well.
Hope i'll get it soon. Apparently a little mix-up as in what bike I have but everything is paid so now a little patience

I´ve received the stuff just today. Waiting for good time to do the job.

Thank you Dan

Dan,

Are the kits available? How much per kit shipped to Pennsylvania, USA? reply [email protected]

D Cool
Waynesboro, PA

Email sent.

Dan.

Hey Dan, I need one TB-repairkit.
Its for a R 1150RT manufacture year jan 2002.
Please send me the price including shippingcosts to Holland for one kit and the payment instruction.

Email sent.

Dan.

Hello, can you email so I could order a rebuild kit for a 99' R1100R right side?

Hi,

Can you send me details of price for both LH & RH kits shipped to UK and how to pay?

Bike is 2002 1150GS

Cheers,

Paypal sent.


Cheers, Simon

With great power comes great responsibility.

Sent from my iPad using Tapatalk.

Hi,
I have a 2003 R1150gs the throttle pulleys are riveted to the shafts, are your kits suitable for this model?
If so any extra difficulties in fitting?

Cheers.

Dan, need both sides for 2001, R1150GS.

Please email details: [email protected]

Thanks,

Paul

Vermont, USA

PM/email sent.

Not sure why I did not get email notifications from the forum though, I would answered quicker...

Thanks,
Dan.

Hello Dan,

I sent you a PM.

Grtz Erik

Email sent back.

Dan.