Separate names with a comma.
Discussion in 'Vendors' started by RADE/GARAGE, Sep 4, 2018.
I had the same issue and Rade sent me a bag of the required nuts and machine screws.
I've got my twin air filter installed but it's pressing up against the ecu cable. Any concerns with this? I'm worried that is going to wear through the foam.
I’m installing the F4 tower on my 2019 HSQV 701 right now but I can’t find the manual. Just the one for the F3.
Is there a manual for the F4?
Yes, but in a different form. Based on all of the questions we are getting we decided to switch to videos. Here is the detailed, step by step guide for RADE/GARAGE F4 rally kit install:
Yes I watched it but the mount is not really the same.. but the video is still good
Is the bar raiser supposed to be included for 2019 701?
Email sent yesterday.
Has anyone installed a Trail Tech Vapor (or any other model) on their R/G tower in place of the stock speedo?
If so, can you provide pics and any installation info specific to the tower and the Trail Tech unit?
Todd did his install (not on the tower) and described int he 701 thread - I assume just use 12mm clamps for our crossbar and hook it up - https://advrider.com/f/threads/husqvarna-701-super-moto-and-enduro.1086621/page-1607#post-39632862
Looking at his pictures it looks like the Vapor uses standard AMPS mount (same as GPS) - in that case just buy our GPS mount and you are all set (Verify with Trailtech first!)
Thanks but I was hoping to find out if the trail tech dash will clear the lights and bar, and also if it uses the same mounting holes as the stock dash. I need to keep my AMPS mount for my GPS.
Definite NO on the stock mounting holes. The clearance is very likely OK, but you need to look at the Vapor's height spec and verify.
Thanks for this info. Will post some pics once I get it figured out.
Just picked up a 701 with Rade Garage rally tower (F4 fairing). It's a fantastic set-up!!!! Going to add a Garmin XT to the tower. I see the part with Rage Garage to mount the Garmin, but I don't see the XT listed. Do I also need to pick up the Garmin Zumo XT mount bracket that Revzilla lists to hold the XT?
Hated the faffing about with the screws...
701 LR owner here - like the look and setup of the F4 kit, without the side panels it looks almost a little incomplete. Any thoughts as to making side panels optional for the kit?
Hi, given the Husky 701 LR was stopped being produced, we are not going to be designing or producing the side panels. Sorry!
Thank You Rade! Easy installation and looks terrific!
Thank you - now go get it dirty and post in the main 701 thread or tag us on social media
Rade Garage stuff is amazing!
I just picked up a 2018 701 with 4500 miles and the previous owner set it with a host of Rade Grage stuff including:
full fairing, tower, and light kit
front tank - I wish I had a black anodized cap because this one is silver
rallye skid plate
and a bunch of other protection and stuff from the Husky catalog. It also has a low fender from a KTM.
The bike is a blast to ride. and I have never had a bike that fits me standing up or sitting down so perfectly. I did a 100-mile plus dual-sport rallye in central Pennsylvania this weekend with a roll chart and GPS, and the height of the tower was right on with everything easy to see if I was standing or sitting. The roads were all gravel and dirt with no singletrack, and I was completely comfortable leading our group.
The only thing I have to get set up is my Scott's stabilizer off my HP2. I have all of the parts ready to install it, but I am going to get the stabilizer rebuilt and the arm switched 180 degrees to fit the location of the 701 post.
The Rade Garage kit is such a great upgrade!
Looks like a great set-up. Recently purchased a '17 701.
Rade Garage is a sweet set-up for sure.
Out and about this weekend picking off sections of the AZBDR: